Introduction
This manual provides detailed instructions for assembling and maintaining your Edu-Toys Tyrannosaurus Rex Skeleton 36-inch Scale Replica Model. This model allows you to construct a true-to-scale replica of a Tyrannosaurus Rex skeleton, offering an educational and engaging experience for enthusiasts.
What's Included
Your Edu-Toys T-Rex Skeleton kit includes the following components:
- 51 true-to-scale, realistic skeleton pieces
- Display stand
- Assembly instructions (this manual)
The model features a central support rod for anchoring the vertebrae, skull, and pelvis sections.
Safety Information
WARNING: This product contains small parts and is not suitable for children under 3 years of age due to potential choking hazards.
Assembly Instructions
Follow these steps to assemble your T-Rex Skeleton model. Refer to the included diagram for numbered parts to ensure correct placement.
- Unpack all components from the box and plastic bags. Lay out all 51 skeleton pieces and the display stand on a clean, flat surface.
- Identify the central support rod. Begin by sliding the main spinal column and rib cage pieces onto this rod, starting from the neck section and moving towards the tail.
- Attach the pelvis section to the appropriate point on the spinal column.
- Connect the individual tail vertebrae pieces to form the full tail, then attach the completed tail to the pelvis.
- Attach the skull to the neck section of the spinal column.
- Assemble the two leg structures and securely attach them to the pelvis.
- Assemble the two arm structures and attach them to the designated points on the rib cage.
- Once all skeleton pieces are connected, carefully lift the assembled T-Rex skeleton and place its feet onto the provided display stand. The model is designed to balance on the stand.
Image: All components of the T-Rex skeleton model laid out on a table, including the main body, limbs, skull, and tail sections, along with the display base.
Image: Close-up view of the assembled T-Rex skeleton model, showing the detailed bone structure and articulation.
Image: The assembled T-Rex skeleton model on its display stand, with a measurement indicating its 36-inch (91cm) length.
Assembly Video
For a visual guide to the assembly process, please watch the official product video below.
Video: This video demonstrates the step-by-step assembly of the Edu-Toys T-Rex Skeleton model, from unpacking the pieces to placing the completed skeleton on its display stand.
Display and Care
Display
The assembled T-Rex skeleton is designed for display. Place it on a stable, flat surface where it will not be easily bumped or knocked over, as it rests on its stand rather than being secured.
Disassembly and Reassembly
The model can be disassembled for storage or repeated assembly. The pieces are designed to snap apart and together without damage, allowing for educational exploration.
Cleaning
To clean the model, simply wipe it with a clean, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which could damage the finish.
Specifications
| Feature | Detail |
|---|---|
| Model Number | EDU-37329 |
| Brand | Elenco |
| Overall Length | 36 inches (approx. 91 cm) |
| Number of Pieces | 51 |
| Material | Plastic |
| Item Weight | 0.2 Pounds |
| Product Care Instructions | Wipe Clean |
Warranty and Support
Warranty Information
This product does not come with a manufacturer's warranty.
Customer Support
For any questions or assistance regarding your Edu-Toys T-Rex Skeleton model, please contact Elenco customer support through their official website or the retailer where the product was purchased.