Pelican 2360-000-110

Download PDF
Contents

Pelican 2360 LED Flashlight User Manual

Model: 2360-000-110 | Brand: Pelican

1. Product Overview

The Pelican 2360 LED Flashlight is a compact, high-performance tactical light designed for demanding environments. Constructed from aerospace-grade aluminum, it offers durability and reliable illumination. This manual provides essential information for the proper setup, operation, and maintenance of your Pelican 2360 flashlight.

Pelican 2360 LED Flashlight, main view

Figure 1: Pelican 2360 LED Flashlight, showcasing its compact design and durable construction.

Key Features:

  • Compact LED flashlight emits 95 lumens with a two-hour runtime on two AA batteries.
  • Aerospace grade aluminum body with a non-slip textured exterior.
  • Impact resistant LED lamp module; push button tail switch.
  • Removable two-way pocket clip attaches flashlight to your pocket or hat brim.
  • Lifetime warranty.

2. Setup

2.1 Battery Installation

The Pelican 2360 LED Flashlight operates on two (2) AA alkaline batteries. Batteries are included with the product.

  1. Unscrew the tail cap of the flashlight by turning it counter-clockwise.
  2. Insert two AA batteries into the battery compartment, ensuring the positive (+) end of the batteries faces towards the head of the flashlight.
  3. Carefully screw the tail cap back onto the flashlight by turning it clockwise until it is securely tightened. Do not overtighten.

Important: Ensure correct battery polarity to prevent damage to the flashlight.

3. Operating Instructions

The Pelican 2360 features a push-button tail switch for power control and mode selection.

Close-up of Pelican 2360 flashlight tail switch

Figure 2: The textured push-button tail switch for operation.

3.1 Power On/Off

  • To turn the flashlight ON: Fully press the tail switch until it clicks.
  • To turn the flashlight OFF: Fully press the tail switch again until it clicks.

3.2 Mode Selection

The flashlight offers multiple lighting modes: High, Strobe, and Low. To cycle through the modes:

  1. With the flashlight ON, lightly press the tail switch (without clicking) to momentarily change modes.
  2. Release and press again to cycle to the next mode.
  3. The sequence is typically High → Strobe → Low.
  4. To select a mode permanently, fully press the tail switch until it clicks while the desired mode is active.

Note: The flashlight may have a memory function that recalls the last used mode when turned back on.

4. Maintenance

4.1 General Care

  • Keep the flashlight clean and free from dirt and debris.
  • Wipe the exterior with a soft, damp cloth. Avoid abrasive cleaners.
  • Regularly inspect O-rings for wear and tear. Replace if damaged to maintain water resistance.
  • Lubricate O-rings periodically with silicone grease to ensure a proper seal.

4.2 Battery Replacement

When the light output diminishes, replace both AA batteries with new ones. Refer to Section 2.1 for battery installation instructions.

Caution: Do not mix old and new batteries, or different types of batteries, as this can damage the flashlight.

5. Troubleshooting

ProblemPossible CauseSolution
Flashlight does not turn on.Dead or incorrectly installed batteries.Replace batteries or ensure correct polarity.
Light output is dim or flickers.Low battery power; loose tail cap or head.Replace batteries; tighten tail cap and head securely.
Modes do not cycle properly.Tail switch not being pressed correctly.Ensure light presses are momentary and full presses are firm clicks.

If the issue persists after attempting these solutions, please contact Pelican customer support.

6. Specifications

Model2360-000-110
Light SourceLED
Light Output (FL1 Standard)95 Lumens
Runtime2 hours, 15 minutes
Beam Distance139 meters
Peak Beam Distance4893 candelas
Voltage3 Volts
BatteriesTwo (2) AA Alkaline (included)
Length6.1 inches
Weight (with batteries)4.6 ounces
Weight (without batteries)2.9 ounces
MaterialAerospace Grade Aluminum
ColorBlack

7. Warranty and Support

7.1 Lifetime Warranty

The Pelican 2360 LED Flashlight is backed by Pelican's legendary Lifetime Guarantee. This warranty covers defects in materials and workmanship for the lifetime of the product. For full details and limitations, please refer to the official Pelican website or contact their customer service.

7.2 Customer Support

For technical assistance, warranty claims, or general inquiries, please visit the official Pelican website or contact their customer support team. Contact information can typically be found on the product packaging or the manufacturer's website.

Visit the Pelican Store on Amazon for more products and information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.