Progress Lighting P5821-20 1-Light Compact Fluorescent Wall Lantern

1. Product Overview

The Progress Lighting P5821-20 is a 1-light energy-efficient compact fluorescent wall lantern designed for outdoor use. It features a transitional styling with an antique bronze finish and a matte white acrylic diffuser. This fixture is rated for use in wet locations and complies with California Title-24 requirements, making it suitable for porches, patios, and other exterior wall applications.

This image shows the Progress Lighting P5821-20 1-Light Energy Efficient Compact Fluorescent Wall Lantern in an antique bronze finish, featuring a classic design with a matte white acrylic diffuser.

2. Safety Information

• WARNING: Disconnect power at the circuit breaker or fuse box before installation or servicing.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
• This product may be subject to California Proposition 65 rules and regulations. For more information, visit www.P65Warnings.ca.gov.
• Do not install this fixture in areas where it may be submerged in water. While rated for wet locations, it is not designed for submersion.

3. Package Contents

Verify that all components are present before beginning installation:

• 1-Light Wall Lantern (P5821-20)
• Matte White Acrylic Diffuser
• Rugged Aluminum Housing
• Mounting Hardware (typically includes mounting strap, screws, wire nuts)
• Note: A compact fluorescent light source (bulb) is not included and must be purchased separately.

4. Setup and Installation

Tools Required: Screwdriver, wire strippers, electrical tape, safety glasses.

1. Turn Off Power: Before starting, ensure the power to the installation area is completely off at the circuit breaker or fuse box.
2. Prepare Wiring: Carefully remove the existing fixture (if any) and expose the electrical wires from the junction box.
3. Attach Mounting Strap: Secure the provided mounting strap to the junction box using the screws.
4. Make Electrical Connections: Connect the fixture's wires to the house wires according to local electrical codes. Typically, connect black to black (live), white to white (neutral), and bare copper or green to bare copper or green (ground). Secure connections with wire nuts and electrical tape.
5. Mount Fixture: Carefully tuck the wires into the junction box and align the fixture with the mounting strap. Secure the fixture to the mounting strap using the provided screws.
6. Install Light Source: Insert a compatible compact fluorescent bulb (not included) into the fixture's socket. Refer to the specifications for the correct wattage.
7. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

Important: If you are unsure about any part of the installation process, consult a qualified electrician.

5. Operating Instructions

This wall lantern operates via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the wall switch to turn the light on or off.

• Light Source Type: Compact Fluorescent
• Maximum Wattage: 13 Watts

6. Maintenance

• Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic diffuser.
• Bulb Replacement: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal. Replace with a new compact fluorescent bulb of the same type and wattage (13 Watts maximum).
• Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.

7. Troubleshooting

If the wall lantern does not operate correctly, perform the following checks:

• No Light:
  • Ensure the wall switch is in the 'ON' position.
  • Check the circuit breaker or fuse for the fixture's circuit. Reset if tripped or replace fuse if blown.
  • Verify the light bulb is securely screwed in and is not burnt out. Replace if necessary.
  • Confirm that all electrical connections are secure and properly wired. (WARNING: Turn off power before checking wiring.)
• Flickering Light:
  • Check for a loose bulb or loose wiring connections.
  • Ensure the bulb is the correct type and wattage for the fixture.

If issues persist after performing these checks, consult a qualified electrician.

8. Specifications

This image illustrates the dimensions of the P5821-20 wall lantern, measuring 8.75 inches in height, 7.25 inches in length, and 5.75 inches in width.

9. Warranty and Support

This Progress Lighting product is covered by a 1-year warranty from the date of purchase. For detailed warranty information, please refer to the official warranty document provided by Progress Lighting, which can typically be found on their website or via the link: https://hubbellcdn.com/warranty/prog_93049973_d_warranty.pdf.

For technical support, replacement parts, or further assistance, please contact Progress Lighting directly. Contact information can usually be found on the manufacturer's website or on the product packaging.