Introduction
This manual provides instructions for the safe installation, operation, and maintenance of the Leviton 8885 Incandescent Lampholder. Please read these instructions thoroughly before beginning installation or use.
Important Safety Information
- Power Disconnection: Always turn off power at the circuit breaker or fuse box before installation, servicing, or replacing bulbs. Verify with a voltage tester that power is off.
- Electrical Codes: This product must be installed in accordance with national and local electrical codes.
- Professional Assistance: If you are unsure about any part of these instructions or the installation process, consult a qualified electrician.
- Electrical Ratings: Do not exceed the specified electrical ratings of 660 Watts and 600 Volts.
- Bulb Compatibility: Use only incandescent bulbs with a medium base (E26).
Product Overview
The Leviton 8885 is a durable porcelain, medium base incandescent lampholder designed for snap-in mounting in various lighting fixtures.
Image Description: A top-down view of the Leviton 8885 Incandescent Lampholder. It features a white porcelain body with two metal snap-in clips on the sides. The center shows the metal contacts for a medium base bulb, with "660W 600V" and a UL listing visible, indicating its electrical ratings and safety certification.
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Leviton |
| Model Number | 8885 |
| Material | Porcelain |
| Mounting Type | Snap-in |
| Voltage Rating | 600 Volts |
| Wattage Rating | 660 Watts |
| Bulb Type | Incandescent, Medium Base (E26) |
| Product Dimensions | 1.83"W x 1.61"H |
| Approvals | UL, CSA |
Installation Instructions
- Power Disconnection: Before beginning any work, ensure the power supply to the fixture is completely disconnected at the circuit breaker or fuse box. Verify with a voltage tester.
- Access Fixture: Carefully access the existing lampholder or the location where the new lampholder will be installed. This may involve removing a light fixture cover or trim.
- Remove Old Lampholder (if applicable): If replacing an existing lampholder, disconnect the wires from the old unit. Note which wire (typically black for hot, white for neutral) connects to which terminal.
- Wire Connection: Connect the electrical wires to the new Leviton 8885 lampholder.
- Connect the hot wire (usually black) to the brass screw terminal.
- Connect the neutral wire (usually white) to the silver screw terminal.
- Mount Lampholder: Insert the lampholder into the fixture opening. The snap-in clips on the sides of the lampholder will secure it in place. Ensure it is firmly seated.
- Reassemble Fixture: Carefully reassemble any covers or trim removed earlier.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box.
Operation
After successful installation, screw a medium base (E26) incandescent bulb into the lampholder. Ensure the bulb's wattage does not exceed 660 Watts. Turn on the light switch to activate the bulb.
Care and Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the lampholder with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Always turn off power before replacing a bulb. Allow the old bulb to cool before removal. Screw in the new bulb firmly but do not overtighten.
- Inspection: Periodically inspect the lampholder for any signs of damage, such as cracks in the porcelain or loose connections. If damage is found, disconnect power and replace the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to fixture, faulty bulb, loose wiring, tripped circuit breaker. | Check circuit breaker. Replace bulb. Verify wire connections are secure (with power off). |
| Bulb flickers | Loose bulb, loose wiring, incompatible bulb. | Tighten bulb. Check wire connections (with power off). Ensure bulb is compatible. |
| Lampholder feels hot | Bulb wattage exceeds rating. | Replace with a bulb that does not exceed 660 Watts. |
Warranty and Support
This Leviton product is covered by a manufacturer's warranty. For specific warranty details and support, please refer to the documentation included with your purchase or visit the official Leviton website.
Manufacturer: Leviton
Website: www.leviton.com
