Miele Dust Compartment Filter (Model 06713110)

1. Product Overview

This document provides instructions for the Miele Dust Compartment Filter, Model 06713110. This pre-motor filter is designed to sit behind the dustbag in your Miele canister or upright vacuum cleaner, offering a cut-to-fit design for broad compatibility.

The filter is compatible with a wide range of Miele vacuum cleaner models, including but not limited to:

• S314, S316, S318, S323i, S324i, S328i, S334i, S336i, S338i, S344i, S401i, S412, S428i, S434i, S444i
• S514, S516, S518, S524, S528, S538, S544, S548, S558, S624, S658, S768, S858i
• S2120, S2121, S2180, S2181, S4210, S4212, S4282, S4580, S4582, S4780
• S5210, S5211, S5280, S5281, S5380, S5381, S5481, S5580, S5981
• S6270, S6290, S7210, S7260, S7280, S7580, C3, S8

Image 1: Miele Dust Compartment Filter (Model 06713110)

2. Installation

Follow these steps to install or replace the dust compartment filter in your Miele vacuum cleaner. The process is generally similar across compatible models.

1. Open the Dust Compartment: Locate and open the dust compartment lid of your Miele vacuum cleaner. This usually involves pressing a release button or latch.
2. Remove the Old Filter: Carefully remove the old, dirty filter from its slot. Note its orientation for correct installation of the new filter.
3. Insert the New Filter: Take your new Miele Dust Compartment Filter (Model 06713110) and align it with the slot. Ensure the filter is seated correctly and push it down until it clicks into place. Small latches on the back of the filter should snap into corresponding holes.
4. Close the Lid: Close the dust compartment lid securely.

3. Maintenance

To ensure optimal performance and air filtration, it is recommended to replace the Miele Dust Compartment Filter regularly. The general guideline is to change the filter every 50 operating hours or approximately every 9 to 12 months, depending on usage and household conditions.

Some Miele vacuum models may feature a filter change indicator. If your vacuum has this feature, follow its prompts for timely filter replacement.

4. Specifications

5. Troubleshooting

If you experience reduced suction or unusual odors after replacing the filter, ensure the filter is correctly seated and the dust compartment lid is fully closed. A poorly installed filter can lead to air leaks and diminished performance. If issues persist, consult your vacuum cleaner's main instruction manual or contact Miele customer support.

6. Warranty and Support

For specific warranty information regarding your Miele Dust Compartment Filter (Model 06713110), please refer to the documentation included with your purchase or visit the official Miele website. For technical support or further assistance, contact Miele customer service directly.