Introduction
This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Mount Plus PL-223 Full Motion TV Monitor Wall Mount Bracket. This mount is designed to securely hold most 13-inch to 43-inch flat screen TVs and monitors with VESA patterns up to 200x200mm and weighing up to 44 lbs (20 kg). It offers full motion capabilities including tilt, swivel, and vertical rotation for optimal viewing flexibility.
Image: Front view of the Mount Plus PL-223 full motion TV wall mount bracket, showcasing its articulating arms and VESA plate.
Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 44 lbs (20 kg). Exceeding this limit may result in serious injury or property damage.
- Screen Size: This mount is suitable for TVs and monitors between 13 and 43 inches.
- VESA Compatibility: Ensure your TV's VESA mounting pattern (distance between mounting holes) is compatible with 100x100mm, 200x100mm, or 200x200mm.
- Wall Structure: The wall must be capable of supporting the combined weight of the mount and your TV. For wood stud installation, ensure the mount is securely fastened to the center of a single wood stud. For concrete or brick walls, appropriate anchors (not always included) must be used. Consult a professional if unsure about your wall's integrity.
- Installation: Read all instructions carefully before installation. If you have any doubts, seek professional assistance. Improper installation can lead to equipment damage or personal injury.
- Moving Parts: Keep hands and fingers clear of moving parts during adjustment to prevent pinching.
Package Contents
Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact customer support immediately.
- Wall Plate Assembly
- TV VESA Plate
- Mounting Hardware (various screws, washers, spacers for TV and wall attachment)
- Instruction Manual
Tools Required
- Pencil
- Measuring Tape
- Level
- Stud Finder (for wood stud installation)
- Electric Drill with appropriate drill bits
- Phillips Head Screwdriver
- Socket Wrench (for lag bolts)
Setup and Installation Instructions
Follow these steps carefully to install your Mount Plus PL-223 wall mount.
- Step 1: Prepare the Wall
Use a stud finder to locate the center of a wood stud at your desired mounting height. Mark the drilling points for the wall plate. Ensure the marks are level using a spirit level. For concrete or brick walls, mark the drilling points and use a masonry drill bit to create pilot holes for appropriate anchors (not included).
- Step 2: Install the Wall Plate
Position the wall plate over the marked pilot holes. Secure the wall plate to the wall using the provided lag bolts. Ensure the bolts are tightened firmly into the stud. Do not overtighten.
Image: A side view of the Mount Plus PL-223 wall mount with an attached TV, illustrating the articulating arm extended from the wall plate.
- Step 3: Attach the VESA Plate to the TV
Identify the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes. Attach the VESA plate to the back of your TV. The detachable VESA plate design allows for easier installation.
Image: A close-up view of the Mount Plus PL-223 mount, highlighting the detachable VESA plate for easy TV attachment and the integrated cable management clips.
- Step 4: Mount the TV to the Arm
Carefully lift the TV (with the VESA plate attached) and hook it onto the articulating arm of the wall mount. Ensure the VESA plate is securely seated on the arm. Tighten any safety screws or bolts to prevent accidental dislodging.
- Step 5: Cable Management
Route your TV's cables through the integrated cable management clips on the articulating arm to maintain a tidy appearance and prevent cable damage.
Operating Instructions
The Mount Plus PL-223 offers various adjustments for optimal viewing.
- Tilt Adjustment: The TV can be tilted from +5 degrees (upward) to -15 degrees (downward) to reduce glare and achieve a comfortable viewing angle. Loosen the tilt adjustment knobs, set the desired angle, and then re-tighten the knobs.
- Swivel Adjustment: The articulating arm allows for a 180-degree swivel, enabling you to turn your TV left or right to face different areas of a room. Gently push or pull the TV to the desired swivel angle.
- Vertical Rotation (Landscape to Portrait): This mount supports a 90-degree rotation, allowing you to switch your display between landscape (horizontal) and portrait (vertical) orientations. This feature is particularly useful for specific applications like digital signage or viewing vertical content from smartphones.
- Extension from Wall: The mount can retract to a low profile of 2.4 inches (66mm) from the wall and extend up to 15 inches (370mm) for flexible positioning.
Image: A diagram showing the Mount Plus PL-223 mount's range of motion, including tilt from +5 to -15 degrees, swivel of ±90 degrees, and rotation of ±90 degrees.
Image: A visual representation of the Mount Plus PL-223 mount's extension capabilities, showing it can extend from 2.6 inches (66mm) to 14.6 inches (370mm) from the wall.
Image: An example of a TV mounted on the PL-223, rotated 90 degrees to display content in portrait orientation.
Maintenance
Regular maintenance helps ensure the longevity and safe operation of your TV mount.
- Periodic Inspection: Periodically check all screws and bolts to ensure they remain tight. Loose connections can compromise stability.
- Cleaning: Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
- Lubrication: Moving parts are designed for smooth operation. If any movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points.
Troubleshooting
- TV sags forward or does not hold tilt: Ensure the tilt adjustment knobs or bolts are fully tightened. Some TVs, especially older or heavier models near the weight limit, may require extra tightening.
- Connections on TV are blocked by the VESA plate: If the VESA plate obstructs ports, consider using spacers (if available in your hardware kit or purchased separately) between the TV and the VESA plate to create clearance. Angled HDMI or power adapters may also be helpful.
- Mount feels wobbly after installation: Double-check that all wall mounting bolts and TV attachment screws are securely tightened. Ensure the wall plate is firmly anchored to a structural stud.
- Difficulty rotating the TV: Ensure no cables are snagged or preventing movement. Check for any adjustment screws that might need to be loosened slightly before rotation and re-tightened afterward.
Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 10.9 x 2.9 x 9 inches |
| Item Weight | 3.16 pounds |
| ASIN | B0039M758G |
| Item Model Number | 4330182700 |
| Manufacturer | Mount Plus |
| Mounting Type | Wall Mount |
| Movement Type | Rotate, Swivel, Tilt |
| Material | Alloy Steel |
| Compatible Devices | Television |
| Maximum Tilt Angle | 20 Degrees (Total range +5 to -15) |
| VESA Compatibility | 100x100mm, 200x100mm, 200x200mm |
| Screen Size Compatibility | 13" to 43" |
| Weight Capacity | Up to 44 lbs (20 kg) |
| Extension from Wall | 2.4" (66mm) to 15" (370mm) |
| UPC | 887491609192, 797734393323 |
Image: A diagram illustrating the Mount Plus PL-223 mount with an optional detachable extension plate, indicated by dashed lines, which can be used to extend VESA compatibility for certain larger TVs.
Warranty and Support
Mount Plus products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Mount Plus website. Please retain your proof of purchase for warranty claims.
