Product Overview
The CLP Keulen Bar Stool is a stylish and functional seating solution designed for various bar heights. It features an adjustable height mechanism, a comfortable backrest, and a 360-degree swivel seat. The faux leather upholstery is easy to maintain, ensuring long-lasting comfort and appearance.
Image: Front view of the CLP Keulen Bar Stool in white, showcasing its design and adjustable height feature.
Safety Information
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity (not specified, but good general advice).
- Avoid standing on the stool or using it as a ladder.
- Keep children away from moving parts during adjustment.
Assembly Instructions
Assembly of the CLP Keulen Bar Stool is straightforward. Please follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components are present.
- Attach Base to Gas Lift: Insert the gas lift cylinder into the center hole of the circular base. Ensure it is seated firmly.
- Assemble Footrest: Slide the footrest ring onto the gas lift cylinder.
- Attach Seat to Gas Lift: Place the seat assembly onto the top of the gas lift cylinder. Apply gentle pressure to secure it.
- Final Check: Ensure all connections are secure and the stool is stable before use.
Image: Diagram showing the dimensions of the CLP Keulen Bar Stool, including height, width, and depth measurements.
Operating Instructions
- Height Adjustment: To adjust the seat height, locate the lever under the seat.
- To raise the seat: Lift the lever while standing up, allowing the gas lift to extend. Release the lever at the desired height.
- To lower the seat: Lift the lever while seated, allowing your weight to compress the gas lift. Release the lever at the desired height.
- Swivel Function: The seat can rotate 360 degrees. Simply turn the seat in the desired direction.
- Footrest: Utilize the integrated footrest for enhanced comfort and support.
Maintenance
Proper care will extend the life and appearance of your bar stool.
- Faux Leather Upholstery:
- For light dirt, wipe with a damp cotton cloth moistened with lukewarm water.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the material.
- Wipe spills immediately to prevent staining.
- Metal Components (Chrome Finish):
- Clean metal parts with a mild soapy solution.
- Dry thoroughly with a soft cloth to prevent water spots.
- Do not use abrasive pads or cleaners that could scratch the chrome finish.
Image: Close-up view of the faux leather seat and backrest, highlighting the material and stitching.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool does not adjust height smoothly or sinks when seated. | Gas lift mechanism may be faulty or worn. | Ensure the height adjustment lever is fully engaged or disengaged. If the issue persists, the gas lift may need replacement. Contact customer support for assistance. |
| Stool is wobbly or unstable. | Loose connections or uneven floor. | Check all assembly screws and tighten if necessary. Ensure the stool is placed on a flat, even surface. |
| Scratches on the base. | Protective sleeve on the stand leg has slipped. | Re-position the protective sleeve. Consider adding additional floor protection if needed. |
Specifications
- Model Number: 1010802
- Material: Faux Leather (100% Polyurethane) upholstery, Metal frame (chrome look)
- Overall Height: 94.5 - 115 cm (adjustable)
- Overall Width: 38.5 cm
- Overall Depth: 47 cm
- Seat Height: 60 - 80.5 cm (adjustable)
- Seat Dimensions (WxD): 38.5 x 38 cm
- Backrest Height: 36.5 cm
- Weight: 9 kg
- Features: 360° Swivel Seat, Gas Lift Height Adjustment, Integrated Footrest
Warranty and Support
For warranty information or technical support, please contact CLP customer service. Keep your purchase receipt as proof of purchase.
Note: Specific warranty terms and conditions may vary by region and retailer.
