CHI Tourmaline Ceramic Series 1-inch Flat Iron Instruction Manual

Introduction

The CHI Tourmaline Ceramic Series Flat Iron utilizes advanced technology to provide even heat distribution, producing negative ions and far-infrared heat. This combination helps reduce static electricity and frizz, leaving hair smooth, silky, and with exceptional shine. This versatile tool is designed for straightening, smoothing, curling, waving, spiraling, flipping, and bending hair.

Setup

1. Unpack: Carefully remove the flat iron from its packaging.
2. Plug In: Plug the CHI Tourmaline Ceramic Hairstyling Iron into a standard power outlet. Ensure the outlet is easily accessible.
3. Power On: Locate the on/off switch and slide it to the 'ON' position. A red indicator light will illuminate.
4. Adjust Temperature: Use the temperature dial to select your desired heat setting. The iron offers variable heat settings ranging from 180°F to 410°F (82°C to 210°C).
5. Heat Up: Allow approximately 30 seconds for the iron to reach the selected temperature. The red indicator light will stop blinking when it is fully heated and ready for use.

Operating Instructions

1. Prepare Hair: To minimize potential heat damage, apply a hair serum and heat protectant to your hair before styling.
2. Section Hair: Divide your hair into one to two-inch sections.
3. Style: Use fluid motions to run the iron over the length of each hair section. The floating plates ensure a smooth glide without snagging or pulling.
4. Versatile Styling: This tool can be used to straighten, smooth, curl, wave, spiral, flip, or bend your hair. Experiment to create your desired style.
5. Power Off: When finished, slide the on/off switch to the 'OFF' position and unplug the iron from the power outlet.

Official Product Videos

Maintenance

• Cool Down: Always allow the flat iron to cool completely before storing it.
• Cleaning: Wipe the plates and exterior with a soft, damp cloth after each use to remove any product residue. Ensure the device is unplugged and cool before cleaning.
• Storage: Store the iron in a safe, dry place, away from moisture and extreme temperatures. The 9-foot swivel cord can be wrapped for neat storage.

Troubleshooting

• Device Not Heating: Ensure the flat iron is securely plugged into a functional power outlet and the on/off switch is in the 'ON' position. Check if the red indicator light is on.
• Hair Snagging: Ensure hair is clean, dry, and free of tangles before use. Take smaller sections of hair to prevent snagging.
• Frizz/Static: Ensure a heat protectant and anti-frizz serum are applied to hair before styling. The tourmaline ceramic technology is designed to minimize static.
• Automatic Shut-off: The product has an auto shut-off time of 1 hour for safety. If the device turns off unexpectedly, it may be due to this feature.

Specifications

Warranty

This CHI Tourmaline Ceramic Series Flat Iron comes with a 2 Year Limited Warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the product packaging or contact CHI customer support.

Support

For further assistance, product inquiries, or warranty support, please contact the manufacturer:

• Manufacturer: CHI Home LLC
• Brand: CHI
• Online Store: Visit the CHI Store on Amazon