ASUS M4A89GTD PRO/USB3 Motherboard Instruction Manual

1. Product Overview

The ASUS M4A89GTD PRO/USB3 is an ATX motherboard designed for AMD Socket AM3 processors. It features the AMD 890GX and SB850 chipsets, offering robust performance and connectivity options including SATA 6Gb/s and USB 3.0. This motherboard is built to support a wide range of components for a powerful computing experience.

Key Features

• CPU: Socket AM3 Support AMD Phenom II/ Athlon II/ Sempron 100 Series Processors; Supports AMD 140W CPU; Supports 45nm CPU; Support HyperTransport 3.0; FSB 5200 MT/s
• Chipset: AMD 890GX & SB850
• Memory: 4x 240pin DDR3-2000(OC)/1333/1066 DIMMs, Dual Channel, ECC/non-ECC, un-buffered, Max Capacity 16GB
• Slots: 2x PCI-Express 2.0 x16 Slots (Support ATI CrossFireX Technology); 1x PCI-Express 2.0 x4 Slot; 1x PCI-Express x1 Slot; 2x PCI Slots
• IDE/SATA: 1x ATA-133 Channel; 1x eSATA Port ; 6x SATA3 Ports, Support RAID 0, 1, 5, 10
• Audio: ALC 892 8-Channel High Definition Audio CODEC

2. Setup and Installation

Before beginning installation, ensure your workspace is clean and free of static electricity. Use an anti-static wrist strap or frequently touch a grounded metal object to discharge static.

2.1 CPU Installation

1. Locate the Socket AM3 on the motherboard.
2. Lift the CPU socket lever.
3. Carefully align the CPU with the socket, ensuring the golden triangle on the CPU matches the triangle indicator on the socket. Do not force the CPU into the socket.
4. Gently lower the CPU into the socket.
5. Push the CPU socket lever back down to secure the CPU.

2.2 CPU Cooler Installation

1. Apply a thin, even layer of thermal paste to the top of the CPU (if your cooler does not have pre-applied paste).
2. Position the CPU cooler over the CPU, aligning the mounting holes or clips.
3. Secure the cooler according to its specific mounting mechanism (screws, clips). Ensure even pressure for optimal contact.
4. Connect the CPU fan cable to the 'CPU_FAN' header on the motherboard.

2.3 RAM (Memory) Installation

1. Open the clips on both ends of the DDR3 DIMM slots.
2. Align the notch on the RAM module with the notch in the DIMM slot. For dual-channel operation, refer to your motherboard manual for the correct slot pairing (e.g., A2 and B2).
3. Press down firmly on both ends of the RAM module until the clips snap into place.

2.4 Storage Devices (SATA & M.2)

1. Connect SATA data cables from your storage drives (HDDs/SSDs) to the SATA 6Gb/s ports on the motherboard.
2. If installing an M.2 SSD, locate the M.2 slot, insert the drive at an angle, and secure it with the provided screw.

2.5 Motherboard Mounting

1. Install the I/O shield into your PC case.
2. Carefully place the motherboard into the case, aligning the screw holes with the standoffs.
3. Secure the motherboard with screws, ensuring not to overtighten.

2.6 Power and Front Panel Connections

1. Connect the 24-pin ATX power connector and the 8-pin CPU power connector from your power supply to the motherboard.
2. Connect the front panel headers (power button, reset button, HDD LED, power LED, front USB, front audio) to their respective pins on the motherboard. Refer to the motherboard manual for exact pin layouts.

3. Operating Instructions

3.1 First Boot and BIOS/UEFI Setup

1. After assembling your system, connect a monitor, keyboard, and mouse.
2. Power on the system. Press the 'DEL' or 'F2' key repeatedly during startup to enter the BIOS/UEFI setup utility.
3. In the BIOS/UEFI, configure boot order, set system time, and adjust any necessary settings for your components. Save changes and exit.

3.2 Driver Installation

After installing your operating system, install the necessary drivers for the motherboard components. These typically include:

• Chipset drivers
• Audio drivers
• LAN (Ethernet) drivers
• Integrated graphics drivers (if using onboard graphics)
• USB 3.0 drivers

Drivers can usually be found on the ASUS support website for your specific motherboard model.

4. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your motherboard.

4.1 Cleaning

• Periodically clean dust from the motherboard and components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Avoid using liquid cleaners directly on components.

4.2 Firmware and Driver Updates

• Check the ASUS support website regularly for updated BIOS/UEFI firmware and drivers.
• Updating firmware can improve compatibility, stability, and performance. Follow the instructions provided by ASUS carefully when performing BIOS updates.

5. Troubleshooting

If you encounter issues, consider the following troubleshooting steps:

5.1 No Power / No POST (Power-On Self-Test)

• Verify all power cables (24-pin ATX, 8-pin CPU) are securely connected.
• Ensure the power supply is switched on and functioning correctly.
• Check that the CPU and RAM are correctly seated. Try booting with only one RAM stick.
• Clear the CMOS (Complementary Metal-Oxide-Semiconductor) by removing the CMOS battery for a few minutes or using the clear CMOS jumper.

5.2 System Instability / Crashes

• Ensure all drivers are up to date.
• Check CPU and GPU temperatures to prevent overheating.
• Run memory diagnostic tools to check for faulty RAM.
• Verify power supply wattage is sufficient for all components.

5.3 Peripheral Detection Issues

• Ensure peripherals are correctly connected to the appropriate ports.
• Install or update USB 3.0 drivers if experiencing issues with USB 3.0 devices.
• Check BIOS/UEFI settings for any disabled ports or controllers.

6. Technical Specifications

7. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official ASUS website or contact ASUS customer support directly. Keep your proof of purchase for warranty claims.

Official ASUS Support Website: https://www.asus.com/support/