T3 Micro SinglePass Straightening and Styling Iron User Manual

1. Introduction

The T3 Micro SinglePass Straightening and Styling Iron is an advanced hair styling tool designed to deliver professional results with ease. Featuring cutting-edge Tourmaline SinglePass™ technology, this iron ensures flawless, high-gloss hair in a single pass, minimizing heat exposure and potential damage.

This manual provides essential information on the safe and effective use, maintenance, and troubleshooting of your T3 SinglePass Iron.

2. Important Safety Information

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:

• Always unplug the appliance immediately after using.
• Do not use while bathing or in a shower.
• Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not reach for an appliance that has fallen into water. Unplug immediately.
• This appliance should never be left unattended when plugged in.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair.
• Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use an extension cord with this appliance.
• This appliance is hot when in use. Do not let eyes or bare skin touch heated surfaces.
• Do not place the heated appliance directly on any surface while it is hot or plugged in. Use the provided heat-resistant mat.

3. Parts of the T3 SinglePass Iron

Figure 3.1: The T3 SinglePass Iron in its closed position, showing the main body and plates.

Figure 3.2: Close-up view of the temperature control dial and power button located on the iron's handle.

Figure 3.3: The included heat-resistant mat, designed to protect surfaces when the iron is hot.

• Ceramic Plates: The iron features custom blend ceramic plates for even heat distribution and a smooth glide.
• Temperature Control Dial: Allows adjustment of heat settings to suit different hair types.
• Power Button: Used to turn the appliance on and off.
• Swivel Cord: Prevents tangling during use.
• Heat-Resistant Mat: For safe placement of the hot iron.

4. Setup

1. Unpack: Carefully remove the T3 SinglePass Iron and all accessories from the packaging.
2. Inspect: Check the appliance and cord for any signs of damage. Do not use if damaged.
3. Placement: Place the iron on a heat-resistant surface, or use the provided heat-resistant mat, ensuring it is away from water and flammable materials.
4. Plug In: Insert the power plug into a suitable electrical outlet. Ensure the voltage matches the appliance's requirements.

5. Operating Instructions

5.1. Basic Operation

1. Turn On: Press and hold the power button until the indicator light illuminates.
2. Select Temperature: Rotate the temperature control dial to your desired heat setting. The iron will heat up rapidly due to SinglePass™ technology.
3. Pre-heat: Allow the iron a few moments to reach the selected temperature.
4. Styling: Section dry hair and glide the iron through each section. For best results, glide the iron at a speed slower than when brushing your hair.
5. Turn Off: After use, press and hold the power button until the indicator light turns off. Unplug the appliance from the outlet.
6. Cool Down: Allow the iron to cool completely before storing.

5.2. Styling Tips

• For straightening, ensure hair is completely dry and detangled. Take small sections for optimal results.
• The iron's design allows for straightening, flipping, and curling. Experiment with different angles and techniques to achieve desired styles.
• Start with a lower heat setting and increase if necessary, especially for fine or damaged hair.

Figure 5.1: Example of hair styled with the T3 SinglePass Iron, demonstrating a shiny, smooth finish achieved by custom blend ceramic plates.

Figure 5.2: Illustration of the SinglePass® Technology, highlighting the efficient heating of the plates for one-pass styling.

Figure 5.3: Depiction of the smart microchip within the iron, ensuring consistent heat delivery for optimal styling.

Figure 5.4: Visual representation of the versatility of the StyleEdge design, capable of straightening, waving, and curling various hair types.

6. Maintenance and Care

• Cleaning: Ensure the iron is unplugged and completely cool before cleaning. Wipe the plates and exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the appliance in water.
• Storage: Store the iron in a cool, dry place. Do not wrap the power cord around the appliance, as this can damage the cord. Use the provided heat-resistant mat for storage or travel.
• Cord Care: Regularly inspect the power cord for any damage. If the cord is damaged, do not use the appliance and contact customer support.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official T3 Micro website. Do not attempt to repair the appliance yourself.

For further assistance, contact T3 Micro customer service.