Introduction
Thank you for choosing the Kingston Brass KS3241AX Vintage Wall Mount Bathroom Faucet. This manual provides detailed instructions for the safe installation, proper operation, and effective maintenance of your new faucet. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.
Safety Information
Always observe the following safety precautions during installation and use:
- Turn off the main water supply before beginning any installation or repair work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- Ensure all connections are secure to prevent leaks. Do not overtighten.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Keep small parts away from children.
Package Contents
Verify that all components are present before beginning installation:
- Kingston Brass KS3241AX Faucet Assembly
- Mounting Hardware
Image: Kingston Brass KS3241AX Faucet showing solid brass construction, corrosion and rust-resistant finish, 1/4 turn cross handles, wall mount installation, 11-11/16 inch spout reach, 1.2 GPM flow rate, and rotating swivel spout.
Specifications
| Model Number | KS3241AX |
| Mounting Type | Wall Mount, 2-hole installation (8" center) |
| Material | Solid Brass Construction |
| Finish | Polished Chrome |
| Number of Handles | 2 (1/4 Turn Cross Handles) |
| Cartridge Type | Drip-free Ceramic Disc |
| Connection Size | Standard 1/2" IPS |
| Maximum Flow Rate | 1.2 GPM (Gallons Per Minute) / 4.5 LPM (Liters Per Minute) at 60 PSI |
| Spout Height | 7.56 Inches |
| Spout Reach | 11.69 Inches |
| Product Dimensions | 8.5 x 7.56 x 2.25 inches |
| Item Weight | 4.96 Pounds |
| Special Features | Rust-Resistant, Easy to Install |
Installation Instructions
Pre-Installation
- Turn off Water Supply: Locate the main water shut-off valve for your home or the specific bathroom and turn it off.
- Clear Work Area: Ensure the installation area is clean and free of obstructions.
- Gather Tools: You will need a wrench, plumber's tape, screwdriver, and possibly a level.
- Inspect Components: Unpack all parts and inspect for any damage.
Mounting the Faucet
The KS3241AX is a wall-mount faucet designed for an 8-inch center 2-hole installation. Refer to the diagram below for dimensions and component placement.
Image: Technical drawing showing dimensions for the Kingston Brass KS3241AX wall mount faucet, including 8-inch adjustable center, spout height of 7-9/16 inches, and spout reach of 8-1/2 inches from the wall.
- Prepare Wall Openings: Ensure your wall has two openings spaced 8 inches apart (adjustable from 7-7/8" to 8-1/8") for the hot and cold water lines and faucet body.
- Install Faucet Body: Insert the threaded ends of the faucet body into the wall openings. Ensure the faucet is level.
- Secure Faucet: From behind the wall (if accessible) or using the provided mounting hardware, secure the faucet body firmly to the wall. Use plumber's tape on all threaded connections.
- Connect Water Lines: Connect the hot and cold water supply lines to the corresponding inlets on the faucet body. Tighten connections securely with a wrench, but do not overtighten.
- Install Handles: Attach the cross handles to the valve stems.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for leaks. If leaks occur, tighten the connections further.
- Check Flow: Turn on the faucet and check for proper water flow and temperature.
Operation
Your Kingston Brass KS3241AX faucet features two cross handles for controlling water flow and temperature.
- Hot Water: The left handle controls the hot water. Turn counter-clockwise to increase flow.
- Cold Water: The right handle controls the cold water. Turn counter-clockwise to increase flow.
- Water Flow: The faucet is equipped with a 1.2 GPM flow rate for water conservation.
- Spout Rotation: The spout can rotate to provide flexibility in use.
Maintenance
To maintain the polished chrome finish and ensure the longevity of your faucet:
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Drip-Free Cartridge: The faucet uses a drip-free ceramic disc cartridge. If dripping occurs over time, the cartridge may need replacement. Contact customer support for assistance.
- Aerator Maintenance: Periodically check the spout for any debris or mineral buildup that might restrict water flow. If your model includes an aerator, it can be unscrewed and cleaned. If flow issues persist and an aerator is not present or replaceable, consult customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow |
|
|
| Leaks from Faucet Base or Handles |
|
|
| Dripping Faucet |
|
|
Warranty and Support
The Kingston Brass KS3241AX faucet comes with a limited warranty. For specific warranty details, please refer to the warranty card included with your product or visit the Kingston Brass official website. For technical assistance, replacement parts, or any other inquiries, please contact Kingston Brass customer support.
Kingston Brass Official Website: www.kingstonbrass.com
