Product Overview
This manual provides essential information for the safe and effective use of your GE Soft White Light Bulbs. These incandescent bulbs are designed to provide warm, pleasing everyday light without harsh glares and shadows, ideal for various indoor lighting applications.
Figure 1: GE Soft White Light Bulb (A19 shape, medium base).
Each bulb uses 25 watts, produces 210 lumens, and has a 2500K soft white light appearance. They are suitable for use in table lamps and enclosed fixtures.
Safety Information
Always read and follow all safety instructions before installing or using the light bulbs.
- Ensure power is turned off at the switch or circuit breaker before installation or removal.
- Do not use with dimmers unless explicitly stated as compatible. These bulbs are non-dimmable.
- Do not exceed the maximum wattage rating of the fixture.
- Avoid touching the bulb with bare hands during operation or immediately after turning off, as it can be hot.
- For indoor use only.
- Keep out of reach of children.
Setup and Installation
- Power Off: Before beginning, ensure the power to the light fixture is completely turned off at the wall switch and, if necessary, at the circuit breaker.
- Remove Old Bulb (if applicable): Carefully unscrew the old light bulb from the socket by turning it counter-clockwise.
- Insert New Bulb: Gently screw the GE Soft White Light Bulb into the empty socket by turning it clockwise until it is snug. Do not overtighten.
- Restore Power: Turn the power back on at the wall switch and circuit breaker.
- Test: Verify that the new bulb illuminates correctly.
Figure 2: Bulb dimensions for proper fit (approximately 4.5 inches / 11 cm in height).
Operating Instructions
These light bulbs operate like standard incandescent bulbs. Simply use the wall switch or fixture switch to turn the light on or off. No special operating procedures are required.
- Intended Use: Designed for general purpose lighting in residential and commercial settings.
- Operating Voltage: 120 Volts.
- Operating Temperature: Suitable for typical indoor ambient temperatures.
Maintenance
GE Soft White Light Bulbs require minimal maintenance.
- Cleaning: Ensure the bulb is cool and the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners.
- Replacement: Replace the bulb when it burns out. Follow the installation steps outlined above.
- Disposal: Dispose of used incandescent bulbs according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. |
|
|
| Bulb flickers. |
|
|
Specifications
- Brand: GE Lighting
- Model Number: 570613
- Light Type: Incandescent
- Wattage: 25 Watts
- Brightness: 210 Lumens
- Color Temperature: 2500 Kelvin (Soft White)
- Bulb Shape Size: A19
- Bulb Base: E26 Medium
- Voltage: 120 Volts
- Average Life: 2500 Hours (based on 3 hours per day usage)
- Product Dimensions: Approximately 4"W x 3"H (refer to Figure 2 for detailed height)
- Item Weight: 2.39 ounces
- Country of Origin: China
Warranty Information
This product comes with a limited warranty. For specific warranty terms and conditions, please refer to the product packaging or contact GE Lighting customer support. The estimated yearly energy cost is $3.01 based on 3 hours per day at $0.11 per kWh, and the bulb lasts approximately 2.3 years based on 3 hours per day usage.
Support
For further assistance or inquiries, please visit the official GE Lighting website or contact their customer service department. You can often find support resources, FAQs, and contact information on the manufacturer's website.
GE Lighting Official Website: www.gelighting.com
