Carex FGB36800 0000

Carex Toilet Safety Frame Instruction Manual

Model: FGB36800 0000

Product Overview

The Carex Toilet Safety Frame is designed to provide sturdy support for individuals needing assistance when sitting down or standing up from the toilet. It features adjustable width to accommodate various toilet sizes and comfortable padded hand grips for enhanced user experience.

Carex Toilet Safety Frame installed on a toilet

Figure 1: Carex Toilet Safety Frame installed on a standard toilet, providing support.

Carex Toilet Safety Frame with text highlighting adjustable width and support for fall risk

Figure 2: The frame provides sitting and standing support and is adjustable from 16 to 18 inches to fit most toilets.

  • Adjustable Width: Fits most elongated and round toilets with a width adjustable from 16" to 18".
  • Comfortable Hand Grips: Cushioned grips are designed for comfort and easy cleaning.
  • Sturdy Construction: Made of durable and anti-corrosive steel, supporting up to 300 lbs.
  • Easy Installation: Designed for straightforward installation under the toilet seat and lid.

Safety Information

Users with limited physical capabilities should be supervised or assisted in commode areas, even when using support rails. Support rails are not intended to support the total weight of a user.

Setup and Installation

The Carex Toilet Safety Frame is designed for easy, tool-free assembly. Follow the steps below for proper installation.

Diagram showing step-by-step assembly of the toilet safety frame

Figure 3: Step-by-step assembly instructions for the Carex Toilet Safety Frame.

  1. Preparation: Ensure your toilet has at least 2.25 inches (2 1/4") between the center of the toilet seat bolt holes and the toilet tank for proper fit.
  2. Attach Base Plate: Position the base plate of the safety frame under the existing toilet seat bolts.
  3. Secure Bolts: Re-tighten the toilet seat bolts through the base plate to secure the frame to the toilet.
  4. Assemble Arms: Attach the padded armrests to the vertical supports on the base plate. Ensure all connections are secure.
  5. Adjust Width: Adjust the width of the frame as needed to fit your toilet and provide comfortable support. The inner dimensions are adjustable from 16" to 19.5".
Close-up of the adjustable inner dimensions of the toilet safety frame

Figure 4: The frame's inner dimensions can be adjusted to fit various toilet sizes.

Operating Instructions

The Carex Toilet Safety Frame provides stable support for daily use. Use the padded hand grips to assist with sitting and standing.

Carex Toilet Safety Frame in a bathroom setting with a plant on the toilet tank

Figure 5: The safety frame blends into a typical bathroom environment while providing essential support.

To sit down, approach the toilet and use the hand grips for balance and support as you slowly lower yourself onto the toilet seat. To stand up, firmly grasp the hand grips and push down to assist in lifting yourself from the toilet. Ensure your feet are flat on the floor for maximum stability.

Maintenance and Care

To ensure the longevity and hygiene of your Carex Toilet Safety Frame, regular cleaning is recommended.

  • Clean the cushioned hand grips and metal frame regularly with a mild soap and water solution.
  • Wipe dry immediately after cleaning to prevent water spots and maintain the finish.
  • Do not use abrasive cleaners or harsh chemicals, as these may damage the finish or materials.
  • Periodically check all bolts and connections to ensure they remain tight and secure. Re-tighten if necessary.

Troubleshooting

If you encounter any issues with your Carex Toilet Safety Frame, consider the following common solutions:

  • Frame feels wobbly: Check all installation bolts and adjustment knobs. Ensure they are securely tightened. The frame should be snug against the toilet.
  • Difficulty adjusting width: Ensure the adjustment knobs are fully loosened before attempting to slide the frame components.
  • Hand grips are loose: The hand grips are designed to be snug. If they feel loose, ensure they are properly seated on the frame.

If problems persist, please contact Carex customer support for further assistance.

Specifications

BrandCarex
Model NumberFGB36800 0000
MaterialAlloy Steel
ColorWhite
Item Weight5 Pounds
Product Dimensions (L x W)11"L x 21"W
Adjustable Width16" - 18" (inner dimensions up to 19.5")
Weight Capacity300 lbs
ManufacturerCarex Health Brands
Date First AvailableNovember 16, 2009
Diagram showing the dimensions of the toilet safety frame: 11 inches high, 21 inches max width, 16 inches deep.

Figure 6: Key dimensions of the Carex Toilet Safety Frame.

Customer Support

For any questions, concerns, or assistance with your Carex Toilet Safety Frame, please contact Carex customer support. Carex is committed to providing support for its products.

Please refer to the product packaging or the official Carex website for the most current contact information.

© 2023 Carex Health Brands. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.