1. Introduction and Safety Information
Thank you for purchasing the Sanyo 4.5kg Fully Automatic Washing Machine, model ASW-45D-WB. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your appliance. Please read this manual thoroughly before using the washing machine and retain it for future reference.
Important Safety Instructions
- Always ensure the washing machine is properly grounded to prevent electric shock.
- Do not operate the machine if the power cord is damaged or if the machine is malfunctioning. Contact qualified service personnel.
- Keep children and pets away from the washing machine during operation.
- Do not wash items that are soiled with flammable substances (e.g., gasoline, oil) as this may cause fire or explosion.
- Ensure the water supply hoses are securely connected to prevent leaks.
- Unplug the appliance before cleaning, performing maintenance, or if it will be unused for an extended period.
2. Product Overview
This section provides an overview of the Sanyo ASW-45D-WB washing machine's main components and control panel features.
Main Components
Figure 2.1: Front-right view of the Sanyo ASW-45D-WB washing machine, showing the top-load design and control panel.
Figure 2.2: Right side view of the washing machine, highlighting its compact design and the position of the drain hose connection.
Figure 2.3: Left side view of the washing machine, showing the smooth exterior panels.
Figure 2.4: Top-down view of the washing machine, clearly showing the control panel and the lid.
Figure 2.5: Interior view of the washing machine tub, featuring a stainless steel drum and agitator, with the water inlet hose visible inside.
Control Panel
Figure 2.6: Close-up of the control panel, detailing buttons for power, start/pause, water level, and wash cycles.
- Power (電源 切/入): Turns the washing machine on or off.
- Start/Pause (スタート/一時停止): Initiates or temporarily stops a wash cycle.
- Course (コース): Selects the desired wash program (e.g., Standard, Blanket, Delicate/Dry, Tub Clean).
- Water Level (水量): Manually adjusts the water level. Indicators for 42L, 37L, 27L, 16L are present.
- Set (セット): Used to confirm selections or adjust specific settings.
- Select (セレクト): Used to cycle through options for wash, rinse, spin, or delay start.
- Wash (洗い): Indicates the wash phase.
- Rinse (すすぎ): Indicates the rinse phase.
- Spin (脱水): Indicates the spin phase.
- Delay Start (予約): Sets a delayed start time for the wash cycle.
3. Setup and Installation
Proper installation is crucial for the performance and longevity of your washing machine. Follow these steps carefully.
3.1 Unpacking
- Remove all packaging materials, including the base packaging and any internal packing from the tub.
- Inspect the machine for any damage incurred during transit. Do not install if damaged.
3.2 Location and Leveling
- Place the washing machine on a firm, level surface to minimize vibration and noise.
- Ensure there is adequate space around the machine for ventilation and maintenance.
- Adjust the leveling feet at the bottom of the machine until it is perfectly stable and level.
3.3 Water Supply Connection
- Connect the water inlet hose (supplied) to the water tap and the inlet valve on the back of the washing machine.
- Ensure all connections are tight to prevent leaks. Do not overtighten.
- Open the water tap fully to check for leaks.
3.4 Drain Hose Installation
- Position the drain hose to ensure proper drainage. It can be placed over the edge of a sink or connected to a standpipe.
- Ensure the drain hose is not kinked or blocked. The end of the hose should be at a height between 60 cm and 90 cm from the floor.
3.5 Power Connection
- Plug the power cord into a dedicated, grounded electrical outlet.
- Do not use extension cords or adapters.
4. Operating Instructions
Follow these steps for basic operation of your Sanyo ASW-45D-WB washing machine.
4.1 Preparing Laundry
- Sort laundry by fabric type, color, and degree of soiling.
- Empty pockets and close zippers and hooks to prevent damage to clothes and the machine.
- Place laundry loosely into the tub, ensuring not to overload. The maximum capacity is 4.5 kg.
4.2 Adding Detergent and Softener
- Add the appropriate amount of detergent to the detergent dispenser according to the detergent manufacturer's instructions and the load size.
- If using fabric softener, add it to the designated softener compartment.
4.3 Starting a Wash Cycle
- Press the Power (電源 入) button to turn on the machine.
- Press the Course (コース) button repeatedly to select the desired wash program (e.g., Standard, Blanket, Delicate/Dry).
- The machine will automatically detect the water level for the selected course. If manual adjustment is needed, press the Water Level (水量) button.
- Press the Start (スタート) button to begin the wash cycle.
4.4 Using Delay Start (予約)
- After selecting the course and water level, press the Select (セレクト) button until the Delay Start (予約) indicator lights up.
- Use the Set (セット) button to adjust the delay time.
- Press Start (スタート) to activate the delay start function. The machine will begin washing after the set delay time.
4.5 Pausing and Canceling a Cycle
- To pause a running cycle, press the Pause (一時停止) button. Press it again to resume.
- To cancel a cycle, press the Power (電源 切) button.
5. Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the lifespan of your washing machine.
5.1 Cleaning the Lint Filter
- The lint filter, typically located inside the tub, should be cleaned after every few washes.
- Remove the filter, open it, and discard any accumulated lint.
- Rinse the filter under running water and reinsert it securely.
5.2 Cleaning the Tub (槽洗浄)
- Use the Tub Clean (槽洗浄) cycle periodically to remove detergent residue and prevent mold growth.
- Follow the instructions for your chosen tub cleaner, if applicable.
5.3 Exterior Cleaning
- Wipe the exterior surfaces with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals.
5.4 Winterization (for cold climates)
- If the machine is in an unheated area and temperatures may drop below freezing, drain all water from the hoses and pump to prevent damage.
- Consult a qualified technician if unsure about proper winterization procedures.
6. Troubleshooting
Before contacting service, please refer to the following common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power; Lid not closed; Start button not pressed. | Check power cord; Close lid securely; Press Start button. |
| Machine does not fill with water | Water tap closed; Water inlet hose kinked; Water supply cut off. | Open water tap; Straighten hose; Check household water supply. |
| Machine does not drain | Drain hose kinked or blocked; Drain pump filter clogged. | Straighten or clear drain hose; Clean drain pump filter (if accessible). |
| Excessive vibration or noise | Machine not level; Shipping bolts not removed; Overloaded or unbalanced load. | Adjust leveling feet; Ensure all shipping bolts are removed; Redistribute laundry evenly. |
| Water leaks | Hose connections loose; Drain hose improperly positioned. | Tighten hose connections; Adjust drain hose position. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
Technical specifications for the Sanyo ASW-45D-WB Fully Automatic Washing Machine.
| Feature | Specification |
|---|---|
| Model Number | ASW-45D-WB |
| Type | Fully Automatic Top-Load Washing Machine |
| Washing Capacity | 4.5 kg |
| Dimensions (D x W x H) | 53.4 cm x 56.5 cm x 89 cm (approximately) |
| Product Weight | 30 kg |
| Control Type | Push Button |
| Door Position | Top |
| Water Levels | Selectable (e.g., 42L, 37L, 27L, 16L) |
8. Warranty and Customer Support
This Sanyo washing machine comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
Customer Support
For technical assistance, service requests, or inquiries regarding your product, please contact Sanyo customer support. Contact information can typically be found on the warranty card, the Sanyo official website, or your purchase receipt.
When contacting support, please have your model number (ASW-45D-WB) and purchase date readily available.
