Introduction
Welcome to your new Krups TG7002 Tabletop Grill. This electric grill is designed for convenient indoor grilling, featuring two independently adjustable grilling surfaces and a powerful 2400 Watt heating system. Please read this manual carefully before first use to ensure safe and optimal operation and to familiarize yourself with all features and functions.
Important Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and/or injury to persons.
- Read all instructions thoroughly before operating the appliance.
- Do not immerse the appliance, power cord, or plug in water or any other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug the grill from the outlet when not in use and before cleaning. Allow it to cool completely before handling or cleaning parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact customer service for repair.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use the appliance outdoors.
- Do not let the power cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not place the grill on or near a hot gas or electric burner, or in a heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to "off", then remove the plug from the wall outlet.
- Do not use the appliance for purposes other than its intended use.
- Surfaces are hot during use. Use oven mitts or gloves when handling hot parts.
Product Overview
The Krups TG7002 Tabletop Grill features a robust design for efficient indoor grilling. Understanding its components will help you operate it effectively.
Figure 1: Overall view of the Krups TG7002 Tabletop Grill. It features a sleek, metallic finish with two distinct grilling areas and integrated controls.
Key Components:
- Independently Adjustable Grilling Surfaces (2): Allows for cooking different foods at different temperatures simultaneously.
- Thermostat Control Knobs (2): For precise temperature adjustment of each grilling zone.
- Indicator Lights (Power/Ready): Provide visual feedback on the grill's status.
- Non-stick Aluminum Die-Cast Grill Plates: Durable and easy to clean, with a double-layer non-stick coating.
- Integrated Drip Tray: Collects excess fats and liquids for healthier cooking and easier cleanup.
- Lid/Cover: Helps to retain heat and moisture for faster, more even cooking.
Figure 2: Detail of the central control area, showing the KRUPS branding and the handle for the integrated drip tray, designed to collect excess fats and liquids.
Figure 3: A closer look at one of the two independent thermostat control knobs, with a red power indicator light and a green ready indicator light.
Setup
Follow these steps to prepare your grill for its first use:
- Unpack: Carefully unpack all components and remove any packaging materials, stickers, or protective films.
- Placement: Place the grill on a stable, heat-resistant, and level surface. Ensure there is adequate ventilation around the appliance and that it is not too close to walls or other heat-sensitive objects.
- Initial Cleaning: Before first use, wipe the grill plates with a damp cloth and dry thoroughly. This removes any manufacturing residues.
- Drip Tray: Ensure the integrated drip tray is correctly inserted into its designated slot at the front of the grill.
- Power Connection: Plug the power cord into a grounded electrical outlet.
Operating Instructions
Preheating
- Ensure the drip tray is correctly inserted.
- Plug the grill into a suitable power outlet. The red power indicator light will illuminate.
- Turn the desired thermostat knob(s) to the desired temperature setting (up to 250 °C).
- Allow the grill to preheat. The green "ready" indicator light will illuminate when the selected temperature is reached. This may take several minutes.
Grilling
- Once preheated, carefully place food onto the non-stick grill plates.
- Close the lid for faster and more even cooking, if desired.
- Monitor cooking progress. The green "ready" light may cycle on and off as the grill maintains temperature.
- Use heat-resistant, non-metallic utensils (plastic, silicone, or wood) to avoid damaging the non-stick coating.
- When cooking is complete, carefully remove food from the grill.
After Use
- Turn the thermostat knob(s) to the "OFF" position.
- Unplug the appliance from the wall outlet.
- Allow the grill to cool completely before cleaning or storing.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your grill. Always ensure the appliance is unplugged and completely cool before cleaning.
Cleaning the Grill Plates
The non-stick aluminum die-cast grill plates are designed for easy cleaning.
- Once cool, gently scrape off any food residue with a plastic or wooden spatula.
- Wipe the grill plates with a damp cloth or sponge. For stubborn residue, a small amount of mild dish soap can be used.
- Rinse with a clean, damp cloth and dry thoroughly.
- Do not use abrasive cleaners, scouring pads, or metal utensils, as these can damage the non-stick coating.
Cleaning the Drip Tray
The integrated drip tray should be emptied and cleaned after each use.
- Carefully remove the drip tray once the grill is cool.
- Empty any collected fat or liquids.
- Wash the drip tray with warm, soapy water.
- Rinse and dry thoroughly before reinserting.
Cleaning the Exterior
Wipe the exterior surfaces of the grill with a soft, damp cloth. Do not use abrasive cleaners.
Caution: Never immerse the main unit, power cord, or plug in water or any other liquid.
Troubleshooting
If you encounter any issues with your Krups TG7002 grill, please refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Grill does not heat up. | Not plugged in; power outlet not working; thermostat knob is off. | Ensure the grill is securely plugged into a working outlet. Turn the thermostat knob to a desired temperature setting. Check your household circuit breaker. |
| Food is not cooking evenly. | Grill not fully preheated; too much food on the grill. | Allow the grill to fully preheat until the green "ready" light illuminates. Avoid overcrowding the grill plates. |
| Smoke is excessive. | Excess fat/oil buildup; food with high fat content. | Ensure the drip tray is clean and properly inserted. Trim excess fat from food before grilling. Clean grill plates thoroughly after each use. |
| Non-stick coating appears damaged. | Use of metal utensils or abrasive cleaners. | Always use plastic, silicone, or wooden utensils. Avoid abrasive cleaning materials. |
Specifications
- Model: TG7002
- Brand: KRUPS
- Power: 2400 Watts
- Fuel Type: Electric
- Grill Plate Material: Solid non-stick aluminum die-cast
- Coating Type: Double-layer non-stick coating
- Thermostat: 2 independently adjustable thermostats, up to 250 °C
- Special Features: Patented heat distribution for even heating, integrated drip tray
- Assembly Required: No
Warranty and Support
KRUPS products are manufactured to high quality standards. For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official KRUPS website. Keep your purchase receipt as proof of purchase.
For further assistance, you may contact KRUPS customer service through their official channels.