CHACON Digital Programmable Timer FR 3680 W

1. Introduction

Thank you for choosing the CHACON Digital Programmable Timer. This device is designed to help you save energy and money by automatically switching your electrical appliances ON and OFF at programmed times. It offers flexible programming options including daily, weekly, group of days, and random cycles, along with a countdown function. Please read this manual carefully before use to ensure proper operation and to maximize the benefits of your new timer.

2. Safety Information

• This timer is designed for indoor use only.
• Do not exceed the maximum load of 3680 W (16 A).
• Ensure the timer is securely plugged into a grounded outlet.
• Do not immerse the timer in water or expose it to moisture.
• Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
• Keep out of reach of children.
• Unplug the timer from the wall outlet before cleaning.

3. Product Overview

The CHACON Digital Programmable Timer features a clear digital display and intuitive buttons for easy programming. It is designed with a French (FR) type plug and socket.

Image 3.1: Front view of the CHACON Digital Programmable Timer, showing the digital display, programming buttons, and the FR type socket.

Image 3.2: The CHACON Digital Programmable Timer plugged into a standard wall outlet, ready for use.

Buttons and Display:

• WEEK: Sets the day of the week.
• HOUR: Sets the hour.
• MIN: Sets the minute.
• SEC: Sets the second (used for countdown).
• CLOCK: Used in combination with HOUR/MIN/WEEK to set the current time and day.
• PROG: Enters or exits programming mode for ON/OFF cycles.
• R (Reset): Resets the timer to factory settings. Use a pointed object to press.
• Manual Override (Hand Icon): Toggles between ON, OFF, and AUTO modes.

4. Setup

4.1 Battery Installation

The timer comes with a pre-installed LR44 1.5V battery. This battery maintains your settings during power outages or when the timer is unplugged. If the display is dim or blank, the battery may need replacement (see Maintenance section).

4.2 Initial Time and Day Setting

Before programming, set the current time and day:

1. Plug the timer into a wall outlet to activate the display.
2. Press and hold the CLOCK button.
3. While holding CLOCK, press WEEK repeatedly to set the current day of the week.
4. While holding CLOCK, press HOUR repeatedly to set the current hour.
5. While holding CLOCK, press MIN repeatedly to set the current minute.
6. Release the CLOCK button. The current time and day are now set.

5. Operating Instructions

The timer allows for up to 20 ON/OFF programming cycles per day, week, or group of days. It also features a random function and a countdown function.

5.1 Programming ON/OFF Cycles

1. Press the PROG button once to enter programming mode. The display will show '1 ON'.
2. Press WEEK to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or groups like MO-FR, SA-SU, MO-SA, etc.).
3. Press HOUR to set the desired ON hour.
4. Press MIN to set the desired ON minute.
5. Press PROG again. The display will show '1 OFF'.
6. Repeat steps 2-4 to set the desired OFF time for the same program.
7. Continue pressing PROG to cycle through the 20 available ON/OFF programs (2 ON, 2 OFF, etc.).
8. To exit programming mode, press the CLOCK button.

5.2 Manual Override (ON/OFF/AUTO)

The manual override button (hand icon) allows you to switch the timer's output mode:

• Press the manual override button to cycle through:
• ON: The connected appliance will remain ON, overriding any programs.
• OFF: The connected appliance will remain OFF, overriding any programs.
• AUTO: The timer will follow the programmed ON/OFF cycles. Ensure the timer is in AUTO mode for programs to execute. If left on ON or OFF, programs will not run.

5.3 Random Function

The random function can be used to deter intruders by making it appear as if someone is home. When activated, the timer will randomly switch the connected appliance ON and OFF within a set period.

1. Press the PROG button until 'RANDOM' appears on the display.
2. Use HOUR and MIN to set the desired random operating window.
3. Press PROG to confirm.
4. To deactivate, press PROG until 'RANDOM' disappears or press CLOCK.

5.4 Countdown Function

The countdown function allows you to set a specific duration after which the connected appliance will switch ON or OFF.

1. Press the PROG button until 'COUNTDOWN' appears.
2. Use HOUR, MIN, and SEC to set the desired countdown duration.
3. Press PROG to start the countdown. The display will show the remaining time.
4. Once the countdown finishes, the appliance will switch its state (e.g., if it was ON, it will turn OFF).
5. To cancel the countdown, press CLOCK.

6. Maintenance

6.1 Cleaning

To clean the timer, unplug it from the wall outlet. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.

6.2 Battery Replacement

The internal LR44 1.5V battery ensures that your programmed settings are retained during power outages. If the display becomes dim or the settings are lost frequently, the battery may need replacement. To replace the battery, carefully open the battery compartment (usually on the back or side) and insert a new LR44 1.5V battery, observing polarity. Dispose of old batteries responsibly.

7. Troubleshooting

8. Specifications

• Model Number: 54020
• Brand: CHACON
• Color: White
• Material: Polychlorure de vinyle (PVC)
• Power Supply: 230 V AC, 50 Hz
• Maximum Power: 3680 W (16 A)
• Number of Programs: 20 ON/OFF cycles
• Programming Modes: Day, Group of Days, Weekend, Everyday, Random, Countdown
• Internal Battery: 1 x LR44 1.5V (included)
• Item Weight: Approximately 110 g
• Plug Type: FR (French standard)

9. Warranty and Support

For warranty information, returns, or technical support, please refer to the retailer's policy where the product was purchased or visit the official CHACON website. Keep your proof of purchase for any warranty claims.

For further assistance, you may contact CHACON customer service through their official channels.