Daylight Slimline Desk Lamp Base Instruction Manual

1. Introduction

The Daylight Slimline Desk Lamp Base (Model A52107) is designed to provide stable, freestanding support for compatible Daylight Slimline table lamps. This accessory offers an alternative to clamp-mounted setups, ideal for workspaces where clamping is not feasible or desired. Its weighted design and non-slip felt base ensure stability and protect your surfaces.

Image 1: The Daylight Slimline Desk Lamp Base, featuring a brushed steel finish and a circular, weighted design.

2. Package Contents

Please verify that all components are present before proceeding with assembly:

• 1 x Daylight Slimline Desk Lamp Base (Model A52107)
• (Note: Compatible Slimline lamp sold separately)

3. Setup Instructions

Follow these steps to attach your compatible Daylight Slimline lamp to the base:

1. Place the Slimline Desk Lamp Base on a flat, stable surface. Ensure the surface is clean and free of debris.
2. Locate the mounting point on your Daylight Slimline lamp.
3. Align the lamp's mounting point with the central stem of the base.
4. Gently insert the lamp into the base. Secure it by tightening any provided screws or fasteners on the lamp's mounting mechanism, ensuring a snug fit. Do not overtighten.
5. Once the lamp is securely attached, adjust the lamp arm to your desired position.

Image 2: A close-up view showing a Daylight Slimline lamp securely attached to the desk lamp base, highlighting the stable connection.

4. Compatibility

This desk lamp base is designed for specific Daylight Slimline models. Please check your lamp model number for compatibility:

• Compatible with: Daylight Slimline models D35108, D35107, and D35106.
• Not compatible with: The Magnifying Arm (D91707) when used with Slimline lamps.

Image 3: An illustration detailing the compatibility of the Slimline Desk Lamp Base with various Slimline Table Lamp models, and noting incompatibility with the Magnifying Arm (D91707).

5. Usage Guidelines

The weighted design and non-scratch, non-slip felt bottom of the base provide secure support for your lamp. This allows for flexible placement on various surfaces without causing damage or instability. Adjust your lamp arm as needed, confident in the base's stability.

Image 4: A person working at a desk with a Daylight Slimline lamp mounted on the desk base, demonstrating its practical use and stable positioning.

6. Care and Maintenance

To maintain the appearance and functionality of your lamp base:

• Wipe the base with a soft, dry cloth to remove dust.
• For stubborn marks, use a slightly damp cloth with mild soap, then dry thoroughly.
• Avoid abrasive cleaners or solvents, as these can damage the brushed steel finish.
• Ensure the non-slip felt on the bottom remains intact to protect surfaces.

7. Troubleshooting

If you encounter any issues with your lamp base:

• Instability/Wobbling: Ensure the base is placed on a completely flat and level surface. Verify that the lamp is securely fastened to the base.
• Surface Marks: Check the non-slip felt on the bottom of the base. If it is damaged or missing, contact customer support for assistance.
• Compatibility Issues: Confirm that your lamp is one of the compatible Slimline models (D35108, D35107, D35106).

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your Daylight Slimline lamp or visit the official Daylight website. Ensure you have your product model number (A52107) available when contacting support.