Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your KRAUS Ramus FVS-1007SN Single Handle Vessel Sink Bathroom Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
The KRAUS Ramus faucet features a universal design suitable for various bathroom aesthetics, creating a modern focal point. It is constructed from 100% lead-free solid brass for superior durability and includes a premium ceramic cartridge for long-lasting, leak-free performance. The rust-resistant Satin Nickel finish is designed to maintain its appearance over time.
Image: KRAUS Ramus FVS-1007SN Single Handle Vessel Sink Bathroom Faucet in Satin Nickel. This image displays the faucet's sleek, modern design and Satin Nickel finish.
Product Dimensions
Understanding the dimensions of your faucet is crucial for proper installation and compatibility with your vessel sink.
- Faucet Height: 12 1/2 inches
- Aerator Clearance: 8 1/4 inches
- Spout Reach: 5 3/4 inches
- Spout Height: 8.25 inches
Image: KRAUS Ramus FVS-1007SN Faucet Dimensions Diagram. This diagram illustrates the key measurements of the faucet, including overall height, spout reach, and aerator clearance.
Setup and Installation
The KRAUS Ramus faucet is designed for single-hole, top-mount installation. All necessary mounting hardware and pre-attached hot/cold waterlines are included for a straightforward setup.
Before You Begin:
- Ensure you have all components as listed in the packaging.
- Turn off the main water supply to your bathroom.
- Clear the area around the installation site.
Installation Steps:
- Prepare the Mounting Surface: Ensure the countertop or sink mounting hole is clean and free of debris.
- Install the Faucet: Insert the faucet body through the mounting hole.
- Secure the Faucet: From underneath the counter, place the rubber washer, metal washer, and mounting nut onto the threaded shank. Tighten the mounting nut securely. Tip: Some users find it easier to tighten the securing bolts with a wrench rather than a Phillips screwdriver, especially in tight spaces.
- Connect Waterlines: Connect the pre-attached hot and cold waterlines to your water supply valves. Ensure connections are hand-tight, then use a wrench for a quarter-turn to secure. Avoid overtightening.
- Test for Leaks: Turn on the main water supply and check all connections for leaks. Operate the faucet to ensure proper water flow and temperature control.
Operating Instructions
The KRAUS Ramus faucet features a single lever for easy control of both water flow and temperature.
- Turning On/Off: Lift the lever handle upwards to turn on the water. Push the lever handle downwards to turn off the water.
- Adjusting Water Flow: The further the lever is lifted, the greater the water flow.
- Adjusting Temperature: Move the lever to the left for hot water and to the right for cold water. The further left or right the lever is moved, the hotter or colder the water will be, respectively.
Image: KRAUS Ramus FVS-1007SN Faucet with water flowing into a white vessel sink. This image demonstrates the faucet in operation, showing the water stream and the vessel sink.
Maintenance and Care
Proper care will help maintain the beauty and functionality of your KRAUS Ramus faucet for years to come.
- Regular Cleaning: Clean your faucet regularly with a soft cloth and mild soap. Rinse thoroughly with warm water and dry with a soft cloth to prevent water spots.
- Avoid Abrasives: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish and void your warranty.
- Rust Resistance: The Satin Nickel finish is rust-resistant, but proper cleaning helps prevent mineral buildup and maintains its luster.
- Aerator Maintenance: If water flow decreases, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and reattach.
Troubleshooting
If you encounter issues with your faucet, refer to the following common troubleshooting tips:
- Leaking from Faucet Base: Check the mounting nut underneath the counter to ensure it is tight. Verify that the rubber washer is correctly seated.
- Leaking from Waterline Connections: Ensure all waterline connections are tight. If leaks persist, check the condition of the washers within the connections; they may need to be replaced.
- Low Water Flow: The aerator might be clogged with debris. Remove and clean the aerator. Also, check your water supply valves to ensure they are fully open.
- Difficulty Adjusting Temperature: Ensure both hot and cold water supply lines are connected correctly and fully open.
If these steps do not resolve the issue, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Kraus |
| Model Name | Ramus |
| Model Number | FVS-1007SN |
| Finish Type | Satin Nickel |
| Material | Brass |
| Mounting Type | Deck Mount (Vessel) |
| Number of Handles | 1 |
| Handle Type | Lever |
| Hole Count | 1 |
| Flow Rate | 1.2 Gallons Per Minute |
| Spout Height | 8.25 Inches |
| Spout Reach | 5.75 Inches |
| Item Weight | 2.8 Pounds |
| Special Features | Lead Free, Rust Resistant |
| Included Components | Mounting Hardware |
Warranty Information
The KRAUS Ramus FVS-1007SN Single Handle Vessel Sink Bathroom Faucet is backed by a Limited Lifetime Warranty. This warranty covers the faucet and its finish, providing assurance against defects in material and workmanship under normal use. For specific terms and conditions, or to make a warranty claim, please refer to the official Kraus website or contact their customer service.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please visit the official Kraus website at www.kraususa.com. You may also find helpful FAQs and contact information for their customer service team there.