1. Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your ROHL U.4756L-EB-2 Provence Bridge Kitchen Faucet with Side Spray. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.
Figure 1: ROHL U.4756L-EB-2 Provence Bridge Kitchen Faucet. This image displays the complete faucet assembly, featuring a classic bridge design with two lever handles and a high-arc swivel spout, all finished in English Bronze. A matching side spray unit is included and shown to the right of the main faucet body.
2. Safety Information
- Always turn off the main water supply before installing or servicing the faucet.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Ensure all connections are secure to prevent leaks.
- Do not overtighten connections, as this may damage the product.
3. Package Contents
Verify that all components are present before beginning installation:
- Faucet Assembly (Bridge Faucet with Swivel Spout and Two Handles)
- Insulated Brass Side Spray
- Mounting Hardware
- Installation Instructions (this manual)
4. Setup and Installation
4.1 Tools Required (Not Included)
- Adjustable Wrench
- Phillips Head Screwdriver
- Plumber's Putty or Silicone Sealant
- Flashlight
- Bucket (for catching drips)
4.2 Pre-Installation Steps
- Turn off Water Supply: Locate the main water shut-off valve for your home or the shut-off valves under the sink. Turn them off completely.
- Clear the Area: Remove any items from under the sink to provide clear access for installation.
- Remove Old Faucet (if applicable): Disconnect the water supply lines from the old faucet. Unscrew the mounting nuts and remove the old faucet from the sink deck. Clean the sink surface thoroughly.
4.3 Faucet Installation
This faucet requires a 3-hole deck mount installation.
- Prepare Faucet Base: Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet body where it will meet the sink deck.
- Position Faucet: Insert the faucet body through the center hole of the sink deck. Ensure the handles are correctly oriented.
- Secure Faucet: From underneath the sink, thread the mounting nuts onto the faucet shanks. Hand-tighten, then use an adjustable wrench to secure firmly, but do not overtighten.
- Install Side Spray: Insert the side spray hose through the remaining hole in the sink deck. Secure it from underneath with the provided mounting hardware.
- Connect Water Supply Lines: Connect the hot and cold water supply lines to the corresponding inlets on the faucet. Use an adjustable wrench to tighten connections, ensuring they are snug but not overtightened.
- Connect Side Spray Hose: Attach the side spray hose to the designated outlet on the faucet body.
4.4 Post-Installation
- Check for Leaks: Slowly turn on the main water supply. Inspect all connections for leaks. If leaks are detected, gently tighten the connection until the leak stops.
- Flush Faucet: Remove the aerator from the spout. Turn on both hot and cold water to full flow for a few minutes to flush out any debris from the water lines. Turn off the water, reattach the aerator.
5. Operating Instructions
The ROHL U.4756L-EB-2 faucet features two lever handles for precise control of water temperature and flow.
- Water Flow: Turn the handles counter-clockwise to increase water flow and clockwise to decrease or shut off.
- Temperature Control: The left handle controls hot water, and the right handle controls cold water. Adjust both handles to achieve the desired water temperature.
- Swivel Spout: The high-arc spout can swivel 360 degrees, allowing for greater reach and flexibility in your sink.
- Side Spray: Press the button on the side spray handle to activate the spray function. Release the button to stop the spray.
6. Maintenance
6.1 Cleaning
- Clean the faucet regularly with a soft, damp cloth and mild soap.
- Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the English Bronze finish.
- Wipe the faucet dry after cleaning to prevent water spots.
6.2 Aerator Maintenance
- If water flow decreases or becomes irregular, the aerator may be clogged.
- Unscrew the aerator from the tip of the spout.
- Rinse any debris from the aerator screen under running water.
- Reattach the aerator, ensuring it is securely tightened.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow |
|
|
| Leaks at Connections |
|
|
| Dripping Faucet |
|
|
| Side Spray Not Working |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | U.4756L-EB-2 |
| Brand | Rohl |
| Finish Type | English Bronze |
| Material | Brass Construction |
| Mounting Type | Deck Mount |
| Hole Count | 3 |
| Number of Handles | 2 (Lever Handles) |
| Spout Reach | 9 Inches |
| Maximum Flow Rate | 1.8 Gallons Per Minute |
| Cartridge Type | Ceramic Disc Control Cartridge |
| Included Components | Faucet Assembly, Insulated Brass Side Spray |
| Item Weight | 10 Pounds |
| Product Dimensions | 17 x 26.5 x 3.75 inches |
| UPC | 685333706777 |
9. Warranty Information
The ROHL U.4756L-EB-2 Provence Bridge Kitchen Faucet is backed by a Limited Lifetime Warranty. This warranty covers defects in material and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official Rohl warranty documentation or contact Rohl customer support.
Note: Proof of purchase may be required for warranty claims.
10. Support
If you require further assistance, have questions not covered in this manual, or need to order replacement parts, please contact Rohl customer support:
- Website: www.rohlfaucets.com
- Phone: Refer to the Rohl website for current contact numbers.
When contacting support, please have your model number (U.4756L-EB-2) and date of purchase readily available.
