FC16 Go Portable SNES System User Manual

Introduction

The FC-16 Go Portable SNES System offers a versatile gaming experience, allowing you to enjoy classic SNES games both on the go and at home. This manual provides comprehensive instructions for setting up, operating, and maintaining your device, ensuring optimal performance and longevity.

Package Contents

Please verify that all items listed below are included in your package:

FC16 Go Portable SNES System Console
Two (2) 2.4 GHz Wireless RF Controllers
AC Power Adapter
AV Output Cable

FC16 Go Portable SNES System with two red wireless controllers and power cable

Image: FC16 Go Portable SNES System, showing the console, two wireless controllers, and the power adapter.

Product Overview

Features

Portable unit with two wireless 2.4 Ghz RF controllers
Incredible 3.5" LCD display for gaming on-the-go
SNES 16-bit game cartridges compatibility
TV output for instant gameplay at home
Wireless controllers require two AAA batteries per controller (not included)

Controls and Ports

The FC16 Go features a familiar layout for SNES enthusiasts:

D-Pad: Located on the left side of the console, used for directional movement.
Action Buttons (A, B, X, Y): Located on the right side, used for in-game actions.
SELECT, RESET, START Buttons: Centralized below the screen for game control.
L/R Shoulder Buttons: Located on the top edge of the console when opened.
3.5" LCD Display: The primary screen for portable gameplay.
Cartridge Slot: Located at the top rear of the console for inserting SNES game cartridges.
AV Out Port: Located on the right side, for connecting to a television.
Headphone Jack: Located on the right side, for private audio.
DC In Port: Located on the left side, for connecting the AC power adapter.
Power Switch: A slider switch, typically on the side, to turn the unit On/Off or switch to TV Out mode.

Setup

Charging the Console

Connect the AC power adapter to the DC In port on the console.
Plug the adapter into a standard wall outlet.
The charging indicator light will illuminate. Allow sufficient time for a full charge before first use.

Inserting a Game Cartridge

Ensure the console is powered off.
Gently insert your SNES game cartridge into the cartridge slot at the top of the console, label facing forward, until it clicks into place. Do not force the cartridge.

Connecting Wireless Controllers

Each wireless controller requires two (2) AAA batteries (not included). Open the battery compartment on the back of each controller and insert the batteries, observing polarity.
Turn on the FC16 Go console.
Press the SYNC button on the controller and the corresponding SYNC button on the console (if available, otherwise the controllers should automatically pair when powered on and within range).
A successful connection will be indicated by an LED on the controller.

Connecting to a Television

Ensure both the FC16 Go and your television are powered off.
Connect one end of the AV output cable to the AV Out port on the FC16 Go.
Connect the other end of the AV cable (typically yellow for video, red/white for audio) to the corresponding AV input ports on your television.
Power on your television and select the correct AV input source.
Slide the power switch on the FC16 Go to the 'TV Out' position.

Operating

Powering On/Off

To power on the console for portable play, slide the power switch to the 'On' position.
To power on for TV play, slide the power switch to the 'TV Out' position.
To power off, slide the power switch to the 'Off' position.

Playing Games

Once powered on with a cartridge inserted, the game should load automatically.
Use the D-Pad and action buttons on the console or connected wireless controllers to play.
The SELECT, RESET, and START buttons function as they would on an original SNES console.

Adjusting Volume

Locate the volume control dial or buttons on the console (typically on the side) to adjust the audio output. Note that the volume may not be able to be turned completely off via the console's controls.

Maintenance

Keep the console and controllers clean by wiping them with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
When not in use for extended periods, remove batteries from the wireless controllers to prevent leakage.
Handle game cartridges carefully. Avoid touching the connector pins and keep them free of dust and debris.

Troubleshooting

Problem	Possible Cause	Solution
Console does not power on.	Low battery; Power adapter not connected properly; Faulty power switch.	Charge the console fully. Ensure power adapter is securely connected. Try a different outlet.
Game does not load or displays errors.	Cartridge not inserted correctly; Dirty cartridge pins; Faulty cartridge.	Re-insert the cartridge firmly. Clean cartridge pins with a cotton swab and rubbing alcohol. Try a different game cartridge.
Wireless controllers do not respond.	Low or dead batteries; Not paired correctly; Out of range.	Replace AAA batteries in controllers. Re-pair controllers by pressing SYNC buttons. Ensure controllers are within close proximity to the console.
No display on TV.	Incorrect TV input selected; AV cable not connected properly; Console not in 'TV Out' mode.	Select the correct AV input on your TV. Ensure AV cable is securely connected to both console and TV. Slide the console's power switch to 'TV Out'.
Sound issues (no sound, static).	Volume too low; Headphone jack interference; Speaker issue.	Adjust the volume. Ensure nothing is partially inserted into the headphone jack. Test with headphones to isolate the issue.

Specifications

Feature	Detail
Model Number	666486802806
Screen Size	3.5 Inches
Display Type	LCD
Controller Type	Button Control
Hardware Interface	Radio Frequency (2.4 GHz for wireless controllers)
Power Source	Battery Powered (Lithium)
Battery Life (Console)	Up to 8 Hours
Controller Batteries	2x AAA per controller (not included)
Material	Plastic
Dimensions (L x W x H)	3 x 9 x 14 inches
Item Weight	1.8 Pounds
Manufacturer	Yobo

Warranty and Support

Specific warranty details for the FC16 Go Portable SNES System are not provided in this manual. For information regarding warranty coverage, returns, or technical support, please contact Hyperkin customer service directly or refer to the product's original packaging and purchase documentation.

You may also visit the official Hyperkin website for support resources and frequently asked questions.

	SupaRetroN HD Instruction Manual: Setup and Usage Guide Comprehensive instruction manual for the Hyperkin SupaRetroN HD, a premium retro gaming console for SNES and SFC. Learn how to set up, connect controllers, and play your favorite classic games.
	RetroN 5 Instruction Manual - Hyperkin - Setup, Features, and Operation Guide Get the most out of your Hyperkin RetroN 5 retro gaming console. This comprehensive manual covers setup, connecting controllers, system and video settings, firmware updates, and troubleshooting for playing classic games from multiple systems.
	Hyperkin Controller Adapter for N64 Controller Quick Start Guide A quick start guide for the Hyperkin Controller Adapter, which allows N64 controllers to be used with Nintendo Switch and PC/Mac systems. Includes setup instructions for both console and PC/Mac modes, and information on button remapping.
	Hyperkin Retron 3 Disassembly Guide A step-by-step guide to disassembling the Hyperkin Retron 3 console, including tools needed and instructions for removing screws and PCBs.

Hyperkin 666486802806