Bostitch Heavy-Duty Staples Instruction Manual

Introduction

This instruction manual provides essential information for the proper use, compatibility, and storage of your Bostitch Heavy-Duty Staples. Designed for demanding fastening tasks, these staples ensure reliable performance when used with compatible stapling tools.

Image: Bostitch Heavy-Duty 1/2" Chisel Point Staples, showing the product packaging and the staples themselves. The packaging indicates compatibility with Stanley-Bostitch B310HDS & 00540 staplers and a capacity of up to 120 sheets.

Compatibility

Bostitch Heavy-Duty Staples are specifically engineered for use with certain stapling tools to ensure optimal performance and prevent damage. It is crucial to verify your stapler's compatibility before use.

• These staples are designed for use in Stanley-Bostitch B310HDS and Bostitch 00540 heavy-duty staplers.
• Ensure your stapler is compatible with 1/2-inch (12.7 mm) leg length and 0.5-inch (12.7 mm) crown width staples.
• Using staples of incorrect size or type may lead to stapler jams, poor fastening, or damage to the stapler.

Loading Instructions

Follow these general steps to load Bostitch Heavy-Duty Staples into a compatible stapler. Always refer to your specific stapler's manual for detailed loading procedures.

1. Open Stapler: Locate and press the release button or lever to open the stapler's staple tray.
2. Insert Staples: Carefully slide a strip of Bostitch Heavy-Duty Staples into the staple tray with the staple points facing downwards. Ensure the strip is fully seated.
3. Close Stapler: Gently push the staple tray back into the stapler until it clicks securely into place.
4. Test: Perform a test staple on a scrap piece of paper to ensure proper loading and function.

Usage Guidelines

For best results and to maximize the life of your stapler and staples:

• Paper Capacity: These staples are designed to fasten up to 120 sheets of standard 20 lb bond paper. Do not exceed the recommended sheet capacity of your stapler or these staples.
• Proper Alignment: Ensure the paper stack is aligned correctly before stapling to achieve a clean, secure fasten.
• Firm Pressure: Apply firm, even pressure when operating the stapler to ensure the staples penetrate and clinch properly.
• Material Suitability: These staples are intended for paper and similar soft materials. Do not attempt to staple hard materials like metal, wood, or thick plastic.

Storage and Handling

Proper storage helps maintain the integrity and performance of your staples:

• Store staples in their original packaging in a cool, dry place.
• Avoid exposure to high humidity or extreme temperatures, which can lead to corrosion or degradation of the adhesive binding the staple strips.
• Keep out of reach of children.

Troubleshooting

Most issues related to stapling are due to incorrect staple usage or stapler maintenance. If you encounter problems:

• Stapler Jams:
  • Ensure you are using the correct size and type of staples (Bostitch 1/2-inch Heavy-Duty Staples).
  • Check if the staple strip is loaded correctly and fully seated in the stapler.
  • Do not overfill the stapler's staple tray.
  • Clear any jammed staples from the stapler according to your stapler's manual.
• Staples Not Penetrating:
  • Verify that the number of sheets does not exceed the stapler's or staple's capacity (max 120 sheets for these staples).
  • Ensure you are applying sufficient and even pressure.
  • Check if the paper is too thick or if there are foreign objects within the stack.

Specifications

Warranty and Support

Bostitch products are manufactured to high-quality standards. For information regarding product warranty, returns, or technical support, please refer to the official Bostitch website or contact their customer service directly. Always retain your proof of purchase for any warranty claims.

For further assistance, visit the official Bostitch store: Bostitch Office Products Store