AR Blue Clean AR383

AR Blue Clean AR383 Electric Pressure Washer Instruction Manual

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your AR Blue Clean AR383 Electric Pressure Washer. Please read these instructions thoroughly before using the product and retain them for future reference.

The AR383 Electric Pressure Washer is designed for high-pressure cleaning tasks around your home, offering up to 1900 PSI and 1.51 GPM. Its compact design and integrated two-wheel trolley ensure portability and ease of use for various outdoor cleaning needs.

Important Safety Information

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Always wear appropriate personal protective equipment, including safety glasses, gloves, and hearing protection.
  • Never point the spray gun at people, pets, or electrical devices.
  • Ensure all connections are secure before operating the pressure washer.
  • Do not operate the unit if the power cord or high-pressure hose is damaged.
  • Keep children and pets away from the operating area.
  • Always disconnect the power supply before performing any maintenance or cleaning.

Package Contents

Verify that all items are present and undamaged upon unpacking:

  • AR383 Electric Pressure Washer Unit
  • Bayonet Connect Trigger Gun
  • Vari-Spray Lance
  • Turbo Lance
  • 20-foot Super Soft High-Pressure Hose
  • 25-ounce Bayonet Connect Foam Cannon
  • Garden Hose Adapter
AR Blue Clean AR383 Pressure Washer accessories including trigger gun, hoses, lances, and foam cannon.

Image: All included accessories for the AR383 Electric Pressure Washer.

Setup Instructions

  1. Connect Water Supply: Attach a standard garden hose (not included) to the water inlet on the pressure washer unit. Ensure the connection is tight to prevent leaks.
  2. Close-up of the water inlet connection on the AR Blue Clean AR383 pressure washer.

    Image: Water inlet connection point.

  3. Connect High-Pressure Hose: Connect the 20-foot high-pressure hose to the high-pressure outlet on the unit and to the trigger gun. Twist until secure.
  4. Close-up of the high-pressure hose connection on the AR Blue Clean AR383 pressure washer.

    Image: High-pressure hose connection point.

  5. Attach Lance: Select the desired lance (vari-spray or turbo) and attach it to the trigger gun by pushing it in and twisting until it locks securely.
  6. Purge Air from System: Turn on the water supply completely. Squeeze the trigger gun to allow water to flow through the system, expelling any trapped air. Continue until a steady stream of water emerges.
  7. Connect Power: Plug the pressure washer into a grounded electrical outlet.
  8. Close-up of the power switch on the AR Blue Clean AR383 pressure washer.

    Image: Power switch for the AR383.

  9. Start Unit: Turn the power switch to the "ON" position. The Total Stop System (TSS) will activate the motor only when the trigger is squeezed.

Operating Instructions

Using the Pressure Washer

  • Ensure the unit is properly set up and connected to water and power.
  • Hold the spray gun firmly with both hands.
  • Squeeze the trigger to begin spraying. The motor will start automatically.
  • Release the trigger to stop the water flow and the motor (TSS feature).

Lances and Nozzles

The AR383 comes with a vari-spray lance and a turbo lance for different cleaning intensities:

  • Vari-Spray Lance: Allows adjustment of the spray pattern from a wide fan to a concentrated stream by rotating the nozzle. Suitable for general cleaning and rinsing.
  • Turbo Lance: Provides a rotating pinpoint stream for maximum cleaning power on stubborn dirt and grime. Use with caution on delicate surfaces.
Close-up of the vari-spray lance attached to the trigger gun.

Image: Vari-spray lance for adjustable spray patterns.

Using the Foam Cannon

The 25-ounce bayonet connect foam cannon is ideal for applying cleaning detergents:

  1. Fill the foam cannon reservoir with your desired pressure washer-safe detergent.
  2. Attach the foam cannon to the trigger gun.
  3. Spray the detergent onto the surface to be cleaned. Allow it to dwell for the recommended time before rinsing.
Close-up of the foam cannon attached to the trigger gun, spraying foam.

Image: Foam cannon for detergent application.

General Cleaning Tips

  • Always start with a lower pressure setting or wider spray pattern and gradually increase as needed.
  • Maintain a safe distance from the surface to avoid damage, especially on wood or painted surfaces.
  • Work in sections, overlapping your spray pattern for even cleaning.
Person using the AR Blue Clean AR383 pressure washer to clean patio chairs.

Image: AR383 Electric Pressure Washer in use cleaning patio furniture.

Person using the AR Blue Clean AR383 pressure washer with a surface cleaner attachment on a paved surface.

Image: AR383 Electric Pressure Washer used with a surface cleaner attachment.

Maintenance

After Each Use

  • Flush the System: Run clean water through the pressure washer for a few minutes to remove any detergent residue.
  • Clean Water Inlet Filter: Regularly check and clean the water inlet filter to prevent debris from entering the pump. Disconnect the garden hose, remove the filter, rinse it, and reinsert.
  • Wipe Down: Clean the exterior of the unit with a damp cloth.

Storage

  • Drain Water: Ensure all water is drained from the pump, hose, and spray gun to prevent freezing damage. Run the unit for a few seconds with the water supply off and the trigger squeezed until no more water comes out.
  • Winterization: In freezing climates, use a pump protector or non-toxic antifreeze solution to protect internal components.
  • Store Accessories: Utilize the onboard storage for the spray gun, lances, and power cord to keep them organized and protected.
  • Store the pressure washer in a dry, frost-free area.
Rear view of the AR Blue Clean AR383 pressure washer showing organized storage for the power cord, hose, and spray gun.

Image: Rear view of the AR383 showing accessory storage.

Troubleshooting

ProblemPossible CauseSolution
Unit does not startNo power supply; Power switch off; GFCI trippedCheck power outlet; Turn power switch ON; Reset GFCI
Low pressure or no water flowWater supply off or restricted; Air in pump; Clogged inlet filter; Nozzle cloggedTurn on water, check hose for kinks; Purge air from system (squeeze trigger without power); Clean inlet filter; Clean nozzle
Water leaks from connectionsLoose connections; Damaged O-ringsTighten all connections; Replace damaged O-rings
Motor runs continuously when trigger is not squeezedAir in pump; Leak in systemPurge air from system; Check all connections for leaks

Specifications

  • Model: AR383
  • Brand: AR Blue Clean
  • Maximum Pressure: 1900 PSI
  • Maximum Flow Rate: 1.51 GPM
  • Amperage: 14 Amps
  • Power Source: Corded Electric
  • Item Weight: 18 Pounds
  • Hose Length: 20 Feet
  • Product Dimensions (L x W x H): 12.25" x 11.25" x 28.5"
  • Tank Volume (Detergent): 1.5 Gallons (for foam cannon)
Diagram showing the dimensions of the AR Blue Clean AR383 pressure washer.

Image: AR383 Electric Pressure Washer with key dimensions.

Warranty and Support

The AR Blue Clean AR383 Electric Pressure Washer typically comes with a 2-year warranty. Please refer to the warranty card included with your product for specific terms and conditions.

Graphic indicating a 2-year warranty for AR Blue Clean products.

Image: 2-Year Warranty graphic.

For technical assistance, replacement parts, or warranty claims, please contact AR Blue Clean customer support. You can often find contact information on the product packaging or the official AR Blue Clean website.

Visit the AR Blue Clean Store on Amazon for more products and information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.