Rain Bird XB106

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Rain Bird XB106 Multi-Outlet Xeri-Bug 1/4" Barb Emitter

Instruction Manual

Introduction

The Rain Bird XB106 Multi-Outlet Xeri-Bug Emitter is designed for efficient and precise water distribution in drip irrigation systems. This device features a single 1/4" barb inlet and six 1/4" barb outlets, allowing a total flow rate of 1.0 Gallon Per Hour (GPH) to be divided among multiple plants or areas. Its durable, UV-resistant construction and self-flushing action contribute to reliable, long-term performance.

Rain Bird XB106 Multi-Outlet Xeri-Bug Emitter

Figure 1: Rain Bird XB106 Multi-Outlet Xeri-Bug Emitter. This image displays the black plastic emitter with its central inlet and six radiating outlets, all designed for 1/4 inch barb connections.

Setup and Installation

  1. System Compatibility: Ensure your irrigation system operates within the recommended pressure range of 15 to 50 PSI (1.0 to 3.5 Bar).
  2. Connection to Supply Line: Connect the single 1/4" barb inlet of the XB106 emitter to your 1/4" drip irrigation supply tubing. Push the tubing firmly onto the barb until it is securely seated.
  3. Connecting Outlet Tubing: Attach 1/4" drip irrigation tubing to each of the six outlet barbs. These lines will direct water to individual plants or specific areas.
  4. Placement: For optimal and even water distribution, position the XB106 emitter and its connected outlet lines at approximately the same elevation. Significant differences in elevation can affect flow uniformity among the outlets.
  5. Initial Flush: Before connecting the XB106, it is recommended to flush your main drip line to remove any debris that could clog the emitter.

Operating Instructions

The Rain Bird XB106 emitter is designed for integration into an automatic drip irrigation system. Once installed, it will distribute water when the system is active.

  • Flow Rate: The emitter provides a total flow rate of 1.0 GPH, which is distributed across its six outlets. The flow rate per individual outlet will depend on the number of active outlets and system pressure.
  • Self-Flushing: The XB106 features a self-flushing action that helps minimize clogging from small particles in the water, contributing to consistent performance.

Maintenance

  • Regular Inspection: Periodically inspect the emitter and its connected tubing for any signs of damage, leaks, or blockages.
  • Cleaning: While the emitter has a self-flushing mechanism, severe water quality issues may still lead to blockages. If reduced flow is observed, disconnect the emitter and flush it with clean water.
  • UV Resistance: The durable, UV-resistant plastic housing is designed for outdoor use and resists degradation from sunlight.

Troubleshooting

ProblemPossible CauseSolution
Uneven water distribution from outlets
  • Significant elevation differences between outlets.
  • Insufficient or excessive system pressure.
  • Partial blockage in an outlet line.
  • Ensure all outlets and the emitter are at a similar elevation.
  • Verify system pressure is within 15-50 PSI. Adjust pressure regulator if necessary.
  • Inspect and clear any blockages in the 1/4" outlet tubing.
No water flow from any outlet
  • Main supply line not active.
  • Complete blockage of the emitter inlet.
  • System pressure too low.
  • Outlets are sealed (manufacturing defect).
  • Check that the irrigation system is turned on and water is flowing to the main drip line.
  • Disconnect the emitter and check for debris blocking the inlet. Flush the main line.
  • Verify system pressure is within the recommended range.
  • Inspect the outlets. If they appear sealed, contact Rain Bird customer support for assistance.
Reduced flow from all outlets
  • Low system pressure.
  • Partial blockage within the emitter.
  • Check system pressure.
  • Disconnect and flush the emitter.

Specifications

  • Model: XB106
  • Product ID: X67000
  • Flow Rate: 1.0 GPH (total, distributed across 6 outlets)
  • Operating Pressure: 15 to 50 PSI (1.0 to 3.5 Bar)
  • Inlet Size: 1/4" Barb
  • Outlet Type: 1/4" Barb (6 outlets)
  • Material: Durable, UV-resistant Plastic
  • Color: Black
  • Dimensions (L x W x H): 2 x 2 x 1 inches
  • Item Weight: 0.32 ounces (0.02 Pounds)
  • UPC: 753810002466

Warranty and Support

For specific warranty information and technical support, please refer to the official Rain Bird website or contact Rain Bird customer service directly. Keep your purchase receipt for warranty claims.

Rain Bird Contact Information:

  • Website: www.rainbird.com
  • Refer to the website for regional contact details and support resources.

© 2026 Rain Bird Corporation. All rights reserved.

This manual is for informational purposes only. Rain Bird reserves the right to make changes without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.