Introduction
This manual provides instructions for the safe and efficient operation of your Westek TM1613DOLB Outdoor Grounded Daily Mechanical Timer. This device is designed to automate the power supply to outdoor electrical devices such as lights, pumps, fountains, and decorations, enhancing convenience and energy efficiency.
Important Safety Information
- Read all instructions before use.
- Do not immerse the timer in water. It is weather-resistant, not submersible.
- Ensure the timer is plugged into a grounded outlet.
- Do not exceed the maximum load capacity of 15 Amps or 1875 Watts resistive.
- Keep children away from the timer and connected devices.
- Disconnect power before performing any maintenance or adjustments.
Product Features
- Outdoor Mechanical Timer: Designed for outdoor use, providing programming functionality for various devices.
- Programmable: Easy to program with up to 24 On/Off settings per day using 30-minute interval pins.
- Dual Outlets: Features two grounded outlets to control two devices simultaneously.
- Rugged Design: Rain-tight housing ensures durability in tough outdoor conditions.
- Energy Efficient: Automates device operation to reduce electricity consumption.
- Manual Override: Front-mounted On/Off switch allows for easy manual operation.

Figure 1: Front view of the Westek TM1613DOLB Outdoor Mechanical Timer, showing the clear protective cover, the timer dial, and the power indicator light.
Setup
Initial Setup
- Unpack the timer and inspect it for any damage.
- Locate a suitable outdoor grounded electrical outlet. Ensure the location is protected from direct heavy rain if possible, despite its weather-resistant design.
- Plug the timer's 3-prong plug into the grounded outlet. The power indicator light on the front of the timer should illuminate.
- Open the clear protective cover to access the timer dial.

Figure 2: Bottom view of the timer, illustrating the two grounded outlets for connecting devices.
Setting the Current Time
- Rotate the timer dial clockwise until the current time aligns with the "TIME" arrow indicator on the dial. The dial is marked with 24 hours (1-12 AM and 1-12 PM).
- Ensure the AM/PM distinction is correctly set. The dark segments on the dial represent PM hours (night), and light segments represent AM hours (day).

Figure 3: Detailed view of the timer dial, showing the 30-minute interval pins and the "PINS DOWN = ON, UP = OFF" legend.
Operating Instructions
Programming On/Off Times
The timer uses non-removable pins around the dial to set programming intervals. Each pin represents a 30-minute period.
- To set a period when the connected device should be ON, push the corresponding pins DOWN.
- To set a period when the connected device should be OFF, leave the corresponding pins UP.
- You can program up to 24 ON/OFF settings per day. For example, to turn a device on from 5:00 PM to 10:00 PM, push down all pins between the 5 PM and 10 PM marks on the dial.
- Once programmed, connect your outdoor devices to the dual outlets on the bottom of the timer.
Manual Override Switch
The timer features a manual override switch located on the side, labeled "TIMER" and "ON".
- Slide the switch to the "TIMER" position for the timer to operate according to your programmed settings.
- Slide the switch to the "ON" position to keep the connected devices continuously powered, bypassing the timer settings.

Figure 4: Side view of the timer, highlighting the manual override switch for continuous operation or timed control.
Maintenance
- Periodically inspect the timer and its cord for any signs of damage, fraying, or wear.
- Keep the clear protective cover closed when not adjusting settings to protect the dial from elements.
- Clean the exterior of the timer with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the outlets are free from debris and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer not turning devices On/Off. |
|
|
| Devices remain continuously On or Off. |
|
|
| Timer is not receiving power. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | TM1613DOLB |
| Brand | Westek |
| Color | Black |
| Material | Solid construction |
| Product Dimensions (D x W x H) | 5" x 5" x 5" |
| Item Weight | 0.63 Pounds (approx. 10 ounces) |
| Number of Settings | Up to 24 On/Off settings per day (30-minute intervals) |
| Electrical Rating | 15 Amps, 1875 Watts Resistive |
| Mounting Type | Wall Mount (vertical use only) |
| Batteries Required | No |
| UPC | 088037940872, 070686506189, 044111177961 |

Figure 5: Back view of the timer, displaying the product label with electrical ratings and model information.
Warranty Information
The Westek TM1613DOLB Outdoor Grounded Daily Mechanical Timer comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or modifications. For warranty claims, please retain your proof of purchase and contact Westek customer support.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Westek customer support. Refer to the official Westek website or product packaging for the most current contact information.
Online Resources: Visit the Westek website for FAQs, additional product information, and support resources.