1. Product Overview
The Leitz Staple Cartridge 02900 is designed for efficient stapling, offering a 40-sheet capacity with 1050 staples per pack. This cartridge is color-coded for easy identification and is specifically engineered for use with compatible Leitz Heavy-Duty Cartridge Staplers, such as the Leitz 02892 model. It provides a reliable and consistent stapling experience for various office and document binding needs.
Image 1: The Leitz Staple Cartridge 02900, shown in its packaging. This image displays the overall appearance of the product as it would be received.
2. Setup and Installation
To ensure proper function, install the Leitz Staple Cartridge 02900 into a compatible Leitz Heavy-Duty Cartridge Stapler. Follow these steps:
- Identify Compatible Stapler: Ensure your stapler is a Leitz Heavy-Duty Cartridge Stapler, such as model 02892, designed for this type of cartridge.
- Open Stapler: Locate and open the stapler's cartridge compartment. This usually involves pressing a release button or sliding a cover. Refer to your stapler's specific manual for detailed instructions on opening the compartment.
- Remove Old Cartridge (if applicable): If replacing an empty cartridge, carefully remove it from the compartment.
- Insert New Cartridge: Align the new Leitz Staple Cartridge 02900 with the guides inside the stapler's compartment. Gently push the cartridge into place until it clicks or seats firmly. The color-coded end should be visible and correctly oriented.
- Close Stapler: Close the cartridge compartment securely. Ensure it is fully latched before attempting to staple.
Image 2: A close-up view of the Leitz Staple Cartridge 02900, highlighting its design and color-coding. This image assists in identifying the correct orientation for insertion.
3. Operating Instructions
Once the staple cartridge is correctly installed, operate your Leitz Heavy-Duty Cartridge Stapler as follows:
- Prepare Documents: Gather the sheets of paper you wish to staple. Ensure they are neatly aligned.
- Insert Documents: Place the corner or edge of the documents into the stapler's throat, positioning them where you want the staple to be placed.
- Engage Stapler: Press down firmly on the stapler handle. The mechanism will drive a staple through the paper and clinch it on the underside.
- Verify Staple: Release the handle and remove the stapled documents. Check that the staple is securely fastened and the papers are bound together.
- Capacity: Do not exceed the maximum stapling capacity of 40 sheets to prevent jams or damage to the stapler and cartridge.
4. Maintenance
The Leitz Staple Cartridge 02900 is a consumable item and requires minimal maintenance. However, proper care of your stapler will ensure optimal performance of the cartridge:
- Keep Clean: Periodically clean the stapler's staple path and cartridge compartment to remove any dust, paper debris, or staple fragments that could cause jams. Use a soft, dry cloth.
- Storage: Store unused staple cartridges in a cool, dry place, away from direct sunlight and extreme temperatures, to preserve their integrity.
- Replacement: Replace the cartridge when staples run out. Do not attempt to refill or modify the cartridge.
5. Troubleshooting
If you encounter issues while using the Leitz Staple Cartridge 02900, consider the following:
- Staple Jams:
- Overloading: Ensure you are not exceeding the 40-sheet capacity. Reduce the number of sheets if necessary.
- Improper Insertion: Verify the cartridge is correctly seated in the stapler. Remove and re-insert if unsure.
- Debris: Check the stapler's staple path for any jammed staples or paper fragments. Carefully remove any obstructions.
- Staples Not Feeding:
- Empty Cartridge: The cartridge may be empty. Replace it with a new one.
- Incorrect Cartridge: Ensure you are using the correct Leitz 02900 cartridge for your stapler model.
- Staples Not Clinching Properly:
- Paper Thickness: The paper might be too thick for the stapler's mechanism, even if within the sheet count.
- Stapler Wear: If the stapler is old or heavily used, its clinching mechanism might be worn. Consider servicing or replacing the stapler.
6. Specifications
| Brand | Leitz |
| Model Number | 02900 |
| Staple Type | Cartridge |
| Sheet Capacity | 40 Sheets |
| Staples Per Pack | 1050 |
| Product Dimensions | 3.75 x 0.75 x 5.75 inches |
| Item Weight | 8 ounces (0.5 Pounds) |
| Compatible With | Leitz Heavy-Duty Cartridge Stapler 02892 |
7. Warranty and Support
As a consumable item, the Leitz Staple Cartridge 02900 typically does not come with an extended warranty. However, if you experience any issues with the product upon initial receipt, please contact your retailer or Leitz customer support for assistance. Ensure you retain your proof of purchase.
For further support regarding compatible Leitz staplers or other Leitz products, please visit the official Leitz website or consult the documentation provided with your stapler.
