Introduction
The Carex Day-Light Sky is an LED bright light therapy lamp designed to provide 10,000 LUX of glare-free white light. This device is intended to support well-being by mimicking natural sunlight, which can be beneficial for individuals experiencing low energy levels, sleep difficulties, problems concentrating, or general sunlight deprivation. It features adjustable height and brightness levels for personalized use.
Image: The Carex Day-Light Sky lamp in its upright position, showcasing its large light panel and adjustable arm.
Video: An overview of the Carex Day-Light Sky lamp, highlighting its features and benefits for daily use.
Setup
Unboxing and Initial Assembly
Carefully remove all components from the packaging. The package includes the lamp head, base, power cord, and a small screwdriver for assembly. Ensure all packing materials, including any rubber bands or inserts securing the light source, are removed before use. These are for shipping purposes only and can be discarded.
- Lay the lamp head with the lens facing upwards on a flat, stable surface.
- Position the base into the recessed groove of the base plate, aligning the hole in the base plate with the hole in the base.
- Using the included screwdriver, insert and tighten the screws securely into the light base. Do not overtighten.
- Carefully lift the assembled unit and stand it upright.
Image: Components of the Carex Day-Light Sky lamp, including the light panel, adjustable arm, and base, ready for assembly.
Adjusting the Lamp Head
The lamp head can be adjusted for optimal positioning. Hold the light head and push the silver buttons on the arm to adjust its height and angle. The light head can also be rotated 45 degrees clockwise or counter-clockwise. Avoid turning the light head beyond this range to prevent damage.
Image: A user demonstrating the adjustment of the lamp head's angle and height.
Video: Demonstrates the assembly process and proper positioning of the lamp. Note: This video may show an older model with fluorescent bulbs; the current product uses long-lasting LED technology.
Operating Instructions
Powering On and Brightness Settings
Plug the power cord into a standard 120 VAC, 60Hz outlet. The lamp features two settings:
- Setting 1 (Therapeutic Light): Provides 10,000 LUX of glare-free white light for therapy sessions.
- Setting 2 (Task Lighting): Provides convenient glare-free task lighting.
Use the switch on the front of the lamp to select the desired brightness level.
Recommended Usage
For optimal therapeutic benefit, position your eyes approximately 12 inches from the lamp's lens, near the center of the light. The light should be shining down from slightly above your eyes. During therapy sessions, you should face the lamp with your eyes open, but you do not need to look directly at the light. Engage in other activities such as reading, eating breakfast, or working on a computer. Therapy sessions are typically between 20 to 30 minutes, but can be adjusted based on individual response. Avoid using the lamp after 8 PM as it may interfere with sleep patterns.
Image: A woman comfortably using the Carex Day-Light Sky lamp while reading on a couch, demonstrating proper distance and angle.
Image: A woman using the Carex Day-Light Sky lamp as task lighting while working on her laptop at a desk.
Maintenance
Cleaning
To clean the lamp, ensure it is unplugged from the power outlet. Use a soft, dry cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or solvents, as these may damage the finish or the lens.
Light Source
The Carex Day-Light Sky utilizes high-efficiency LED diodes, which are designed for long-lasting performance and typically do not require user replacement. If you experience any issues with the light output, please refer to the troubleshooting section or contact customer support.
Troubleshooting
Light Not Turning On or Flickering
- Ensure the power cord is securely plugged into both the lamp and a functional wall outlet.
- Verify that the selected brightness setting is active.
- If the issue persists after checking connections, contact customer support.
Specifications
- Model Number: DL2000
- Light Output: 10,000 LUX at 12 inches
- Light Type: LED Bright White Light
- UV Filtration: Filters 100% of harmful UV rays
- Power Requirements: 120 VAC, 60Hz, 1.5A
- Product Dimensions: 10.75"D x 13.69"W x 27.25"H
- Item Weight: 8.2 Pounds
- Base Material: Polycarbonate (PC)
- Finish Type: Polished
Image: A diagram illustrating the dimensions of the Carex Day-Light Sky lamp.
Safety Information
- The light box is made of Hi-impact polycarbonate and the lens filters 100% of harmful UV rays, meeting standards for safe light therapy.
- Do not stare directly into the light for extended periods during therapy sessions.
- Keep the device away from water or excessive moisture.
- Ensure the device is unplugged before cleaning or performing any maintenance.
- Consult a healthcare professional if you have any concerns about using light therapy, especially if you have pre-existing eye conditions or are taking medications that may increase light sensitivity.
Warranty and Support
The Carex Day-Light Sky is backed by an industry-best 5-year limited warranty. For further information, replacement parts, or service, please contact Carex customer support or visit the official website.
- Manufacturer: Uplift Technologies Inc. (Carex)
- Website: www.day-lights.com
- Phone: 1-800-387-0896
