User Manual

Introduction

This user manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Drive Medical 13067 Non-Tilt Overbed Table. Please read this manual thoroughly before use to ensure safe and proper operation. Keep this manual for future reference.

Image: The Drive Medical 13067 Non-Tilt Overbed Table in Silver Vein finish, showcasing its H-style base, adjustable height column, and flat tabletop.

Safety Information

WARNING: Failure to follow these instructions may result in injury or damage to the product.

• Ensure all parts are securely fastened before use.
• Do not exceed the maximum weight capacity of 40 lbs (18.1 kg).
• Always lock the casters when the table is in a stationary position to prevent accidental movement.
• Keep hands and fingers clear of moving parts during height adjustment.
• Do not use the table as a walking aid or for support when standing.
• Regularly inspect the table for any signs of wear or damage. Discontinue use if damage is observed.

Setup and Assembly

The Drive Medical 13067 Overbed Table requires minimal assembly. It is recommended to assemble the table on a clean, flat surface.

1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the packing list are present.
2. Attach Upright to Base: Connect the upright support column to the H-style base. Ensure the alignment is correct and secure with the provided fasteners.
3. Install Casters: Insert the swivel casters into the designated slots on the base. Ensure they are firmly seated and can rotate freely.
4. Mount Tabletop: Attach the tabletop to the top of the upright column. Secure it using the appropriate screws and ensure it is level and stable.
5. Test Adjustment Mechanism: Before first use, test the height adjustment lever to ensure smooth operation and secure locking at various heights.

Image: A diagram illustrating the key components of the Non-Tilt Overbed Table: (1) Height adjustment lever, (2) Large tabletop surface, and (3) Sturdy H-shaped base.

Operating Instructions

The Drive Medical 13067 Overbed Table is designed for ease of use and versatility.

Height Adjustment

The table's height can be adjusted infinitely between 28 and 45 inches. To adjust the height:

• To Raise: Apply slight upward pressure to the tabletop. The table will rise easily. Release pressure at the desired height, and the tabletop will lock securely into place.
• To Lower: Locate the height adjustment lever (typically under the tabletop near the upright column). Press and hold the lever while gently pushing down on the tabletop to lower it to the desired height. Release the lever to lock the tabletop in position.

Image: A close-up view of a person's hand operating the height adjustment lever located beneath the tabletop, demonstrating the ease of raising or lowering the table.

Image: A visual representation of the overbed table's customizable height range, indicating it can be adjusted from 28 to 45 inches, with tabletop dimensions of 30 inches width and 15 inches depth.

Maneuverability and Stability

The H-style base with 2-inch swivel casters allows for easy movement and positioning of the table.

• Moving the Table: Gently push or pull the table to move it to your desired location. The swivel casters provide smooth rolling on various floor surfaces.
• Locking Casters: To ensure stability when the table is in use, engage the locking mechanism on the casters. This prevents unintended movement.

Image: A caregiver gently pushing the overbed table towards a patient in bed, demonstrating its easy maneuverability and positioning for meals or activities.

Image: A close-up view of one of the table's 2-inch swivel casters, highlighting the locking mechanism that provides additional stability and prevents unwanted movement.

Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your overbed table.

• Cleaning: Wipe the tabletop and frame with a dry cloth. For more thorough cleaning, use a mild, non-abrasive cleaner and a damp cloth, then dry immediately. Avoid harsh chemicals or abrasive cleaning pads.
• Inspection: Periodically check all fasteners (screws, bolts) to ensure they are tight. Inspect the casters for smooth rotation and ensure the locking mechanisms function correctly.
• Lubrication: If the height adjustment mechanism becomes stiff, a small amount of silicone spray lubricant can be applied to the moving parts of the column.

Troubleshooting

Specifications

• Model: 13067
• Brand: Drive Medical
• Product Dimensions (D x W x H): 15 inches x 30 inches x 28-45 inches (adjustable)
• Base Dimensions (D x W): 15.5 inches x 26.5 inches
• Maximum Weight Capacity: 40 lbs (18.1 kg)
• Tabletop Material: Walnut wood grain low-pressure laminate
• Frame Material: Alloy Steel / Steel (Silver Vein finish)
• Item Weight: Approximately 22 lbs (10 kg)
• Casters: 2-inch swivel casters with locking mechanism
• UPC: 822383138800

Warranty and Support

This Drive Medical 13067 Non-Tilt Overbed Table is backed by a Limited Lifetime Warranty from Drive Medical. This warranty covers defects in materials and workmanship for the lifetime of the original purchaser.

For warranty claims, technical support, or replacement parts, please contact Drive Medical customer service. Refer to the official Drive Medical website or your purchase documentation for the most current contact information.

Note: Keep your proof of purchase for warranty validation.