Linon Brown 3-Piece Faux Marble Tavern Set Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Linon Brown 3-Piece Faux Marble Tavern Set. This compact set includes one counter-height table and two backless counter stools, designed for versatile use in various living spaces. The table features a faux stone paper-wrapped top and a rich espresso finish, complemented by stools with padded black vinyl seats. Please read these instructions carefully before beginning assembly or use to ensure proper setup and longevity of your product.

Image: The Linon Brown 3-Piece Faux Marble Tavern Set, featuring a rectangular table with a faux marble top and two matching backless stools with dark padded seats.

Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand on the table or stools.
• Do not exceed the maximum weight capacity: Table - 200 lbs, Stools - 275 lbs each.
• Keep small parts away from children during assembly to prevent choking hazards.
• Use caution when moving the assembled furniture to avoid injury or damage.

Image: An illustration showing the weight limits for the table (100 lbs) and stools (275 lbs each).

Package Contents

Before beginning assembly, ensure all parts and hardware are present. If any items are missing or damaged, please contact customer support.

• 1 x Counter-Height Table
• 2 x Padded Counter Stools
• All necessary assembly tools and hardware (screws, washers, dowels, etc.)

Assembly Instructions

Assembly is required for this product. Please follow the steps below carefully. It is recommended to have a second person assist with assembly.

Table Assembly

1. Begin with the table. Identify the table top and the four table legs.
2. Attach the four legs to the underside of the table top using the provided hardware (typically screws, washers, and dowels). Ensure the short dowel at the top of each leg aligns with the corresponding hole on the table's underside. Follow the included diagram for correct washer and screw arrangement.
3. Tighten all fasteners securely. Do not overtighten.

Stool Assembly (Repeat for both stools)

1. Lay one stool leg (#4) flat on a protected surface. Attach a square wooden cross piece (#5) to it, ensuring the dowel fits into the matching hole near the top of the leg.
2. Carefully insert the metal piece (F) into the small hole on the side of wooden piece #4. Align the hole in the metal piece with the hole from the edge of the wooden piece. The Phillips head side of the metal piece should face outwards. If needed, use a Phillips screwdriver to twist the metal piece for alignment.
3. Using screws (C), secure two long metal cross pieces (#6) to the same stool leg. These metal pieces should fit into the appropriate holes.
4. Attach the second stool leg (#4) to the assembled wooden and metal cross pieces to complete the stool base.
5. Place the stool base upright. Position the padded seat cushion onto the top of the stool, ensuring it aligns with the corners of the stool legs.
6. Turn the stool upside down, resting it on the cushion. Insert the pointed wood screws (G) into the four holes (two in each wooden cross piece). Apply firm pressure and twist with a Phillips head screwdriver until securely tightened.
7. Insert the small wooden buttons (H) into the holes along the legs where screws (C) were used. A small amount of wood glue can be used to secure them if they tend to fall out.

Operating Instructions

The Linon Brown 3-Piece Faux Marble Tavern Set is designed for casual dining, cocktail parties, or as a flexible workspace. The stools tuck neatly under the table when not in use, optimizing space.

• Position the table on a flat, stable surface.
• Use the stools for seating at the table.
• When not in use, push the stools completely under the table to save space.

Image: The Linon Tavern Set positioned in a kitchen nook, demonstrating its space-saving design and suitability for smaller areas.

Maintenance

Proper care will extend the life and appearance of your tavern set.

• Table Top: The faux stone paper-wrapped tabletop is easy to wipe clean. Use a soft, damp cloth with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Wipe spills immediately.
• Wood Frame: Clean the espresso-finished wood with a soft, dry cloth. For tougher spots, a slightly damp cloth can be used, followed by immediate drying. Avoid prolonged exposure to moisture.
• Faux Leather Seats: Wipe clean with a damp cloth and mild soap. Avoid excessive moisture and direct sunlight to prevent cracking or fading.
• General: Periodically check all fasteners and re-tighten them to maintain stability.

Image: A close-up view of the faux marble table top, highlighting its texture and finish.

Troubleshooting

• Wobbly Table/Stools: Check all assembly screws and ensure they are tightened evenly and securely. Uneven floors can also cause wobbling; try repositioning the furniture or using furniture pads.
• Chipping/Blemishes: The faux stone paper-wrapped tabletop may be susceptible to chipping if subjected to sharp impacts. Handle with care. Minor blemishes can sometimes be touched up with furniture repair markers matching the espresso finish.
• Loose Wooden Buttons: If the decorative wooden buttons (H) fall out, a small amount of wood glue can be used to re-secure them.

Specifications

Image: A diagram illustrating the dimensions of the table (42" W x 22" D x 36" H) and stools (13.75" W x 13.75" D x 25" H).

Warranty and Support

Linon guarantees that this product will be free from defects in material and workmanship for 30 days from the purchase date. Linon will replace any missing or defective parts for a period of 6 months from the date of purchase. For support or to report missing/defective parts, please refer to the contact information provided with your purchase documentation.