Introduction
The Guide Gear Universal ATV Front and Rear Cargo Basket Set is engineered to significantly enhance your All-Terrain Vehicle's cargo capabilities. This 2-piece set provides robust and reliable storage solutions for transporting gear, tools, or supplies during your outdoor adventures. Designed for universal fitment, these baskets integrate seamlessly with most ATV rack systems.
Product Features
- Increased Cargo Capacity: Instantly expands your ATV's ability to carry ample items, perfect for hauling gear.
- Durable Construction: Made from heavy-duty 14-gauge steel mesh with 3/4" square steel tubing for superior strength and stability.
- Secure Gear Transport: Mesh side rails provide containment and multiple tie-down points to keep your cargo secure during transit.
- Weather-Resistant Finish: Features a powder-coated finish for enhanced durability, offering resistance against rust, scratches, and corrosion, ensuring longevity in various outdoor conditions.
- Universal Fit: Designed to fit most tubular and composite ATV racks, offering broad compatibility.
- Easy Installation: Simple and straightforward installation process, allowing for quick setup by one person.
Components and Dimensions
The set includes one front basket and one rear basket, each designed for specific placement on your ATV.
- Front Basket Dimensions: 36 inches (Length) x 17 inches (Width) x 5.25 inches (Height).
- Rear Basket Dimensions: 40.75 inches (Length) x 29.5 inches (Width) x 5.25 inches (Height).
- Total Set Weight: Approximately 58 lbs.
Image: The complete Guide Gear Universal ATV Front and Rear Cargo Basket Set, showcasing both baskets.
Image: The rear cargo basket installed on an ATV, highlighting its size and placement.
Image: The front cargo basket installed on an ATV, demonstrating its fit and utility.
Installation Guide
The Guide Gear ATV Cargo Basket Set is designed for simple installation on most tubular and composite racks. While the set includes mounting hardware, some users may find alternative hardware beneficial for specific ATV models or for enhanced security.
General Installation Steps:
- Unpack Components: Carefully remove all components from the packaging. Verify that all parts and hardware are present.
- Position Baskets: Place the front basket on the front rack of your ATV and the rear basket on the rear rack. Ensure proper alignment and clearance from other ATV components.
- Attach Mounting Hardware: Use the provided mounting brackets to secure the baskets to your ATV's existing racks. The brackets are typically flat bars that attach above and below the existing rack, secured with bolts and locknuts.
- Tighten Fasteners: Gradually tighten all bolts, ensuring the baskets are firmly attached and do not wobble. Avoid over-tightening to prevent damage to your ATV's racks.
- Final Check: Before use, double-check all connections to ensure they are secure.
Note on Hardware: While the included hardware is designed for flexible mounting, some users have found that "U" bolts (with a crossbar) purchased separately from a local hardware store can provide a more secure and easier installation, especially in tight spaces or for specific rack designs. If using "U" bolts, ensure they are of appropriate size and material for outdoor use.
Usage Guidelines
These cargo baskets are designed to safely transport a variety of items on your ATV. Follow these guidelines for optimal use:
- Load Distribution: Distribute weight evenly within the baskets to maintain ATV stability. Avoid placing all heavy items on one side.
- Secure Your Load: Utilize the mesh side rails and integrated tie-down points to secure your cargo using ropes, bungee cords, or cargo nets. This prevents items from shifting or falling out during movement.
- Observe Weight Limits: Be mindful of your ATV's manufacturer-recommended weight limits for its front and rear racks. Do not overload the baskets.
- Clearance: Ensure that loaded items do not obstruct your view, steering, or access to ATV controls.
Image: An ATV equipped with both front and rear cargo baskets, ready for use.
Image: An ATV with various items, including a cooler and toolbox, secured in the cargo baskets.
Image: A close-up of the front basket holding a rope and helmet, demonstrating its utility in winter conditions.
Video: An official product video from Guide Gear showcasing the features and practical use of the Universal ATV Front and Rear Cargo Basket Set.
Care and Maintenance
To ensure the longevity and optimal performance of your Guide Gear ATV Cargo Basket Set, follow these care and maintenance recommendations:
- Regular Cleaning: Clean the baskets periodically with mild soap and water to remove dirt, mud, and debris. Rinse thoroughly and allow to air dry.
- Inspect for Damage: Regularly inspect the steel mesh, tubing, and welds for any signs of damage, bending, or cracks. Address any issues promptly to prevent further deterioration.
- Powder Coat Protection: The powder-coated finish provides excellent resistance to rust and scratches. If the coating becomes chipped or scratched, touch up the affected areas with rust-inhibiting paint to prevent corrosion.
- Hardware Check: Periodically check all mounting hardware for tightness. Vibrations from ATV operation can loosen fasteners over time. Tighten as necessary.
- Storage: When not in use for extended periods, store the baskets in a dry, sheltered area to protect them from extreme weather conditions.
Troubleshooting Common Issues
This section addresses some common concerns users may encounter with the ATV cargo basket set.
- Missing or Damaged Hardware:
Issue: Upon arrival, some hardware may be missing or the packaging may be damaged.
Solution: Carefully inspect the package upon delivery. If hardware is missing or damaged, contact customer support immediately for replacement parts. - Difficulty with Fit on Smaller ATVs:
Issue: The baskets, particularly the rear one, may seem too large or heavy for smaller ATV models.
Solution: While designed for universal fit, consider the overall dimensions and weight (58 lbs for the set) in relation to your specific ATV's capacity and rack size. For smaller ATVs, the front basket alone might be sufficient, or modifications to mounting points may be necessary. - Paint Flaking or Rusting:
Issue: The powder coat finish may show signs of flaking or rust, especially if exposed to harsh conditions or impacts.
Solution: This can occur due to manufacturing variations or shipping impacts. It is recommended to inspect the finish upon receipt. For minor flaking or scratches, apply a rust-inhibiting paint or primer to the affected areas to prevent further corrosion. - Mounting Hardware Not Secure Enough:
Issue: The provided flat bar mounting hardware may not feel sufficiently secure or may be difficult to install in certain areas.
Solution: As noted in the installation section, consider replacing the provided hardware with heavy-duty "U" bolts. These can offer a more robust and often easier-to-install solution, especially when attaching to tubular racks. Ensure the "U" bolts are appropriately sized for your ATV's rack and the basket's mounting points.
Product Specifications
| Attribute | Detail |
|---|---|
| Brand | Guide Gear |
| Model Number | 02-ATVBKK-000GG |
| Item Weight | 61.4 pounds (Shipping Weight) |
| Product Dimensions | 42.5 x 38 x 8 inches (Packaged) |
| Front Basket Dimensions | 36" x 17" x 5.25"H |
| Rear Basket Dimensions | 40.75" x 29.5" x 5.25"H |
| Material | Heavy-duty 14-gauge steel mesh, 3/4" square steel tubing |
| Finish | Powder-coated |
Warranty and Support
This product is typically covered by a 30-day easy return policy. For specific warranty details, product support, or to address any issues not covered in this manual, please refer to your purchase documentation or contact the seller directly.
Customer Support: For assistance, please reach out to the customer support provided by The Sportsman's Guide, the official seller of Guide Gear products. Contact information can usually be found on your order details or the seller's storefront.
