DaVinci Jenny Lind 3-in-1 Convertible Crib Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, maintenance, and safety of your DaVinci Jenny Lind 3-in-1 Convertible Crib, model M7391E. This crib is designed to adapt to your child's growth, converting from a crib to a toddler bed and a daybed. It features a classic spindle design, adjustable mattress positions, and removable wheels for convenience.

Image 1.1: The DaVinci Jenny Lind 3-in-1 Convertible Crib in Ebony, showcasing its classic design and wheels.

2. Safety Information

Please read and understand all instructions before assembling and using the crib. Keep this manual for future reference. Failure to follow these warnings and instructions could result in serious injury or death.

• GREENGUARD Gold Certified: This product has undergone rigorous scientific testing for over 10,000 chemical emissions and VOCs. It contributes to cleaner indoor air, creating a healthier environment for your baby.
• Always ensure all bolts and fasteners are securely tightened. Periodically check for loose hardware, damaged parts, or sharp edges.
• Do not use the crib if any parts are missing, damaged, or broken. Contact DaVinci customer service for replacement parts.
• The mattress support must be in the lowest position when your child is able to stand.
• Do not place the crib near windows where cords from blinds or drapes could strangle a child.
• Do not place items with a string or cord around a child's neck, such as hood strings or pacifier cords.
• Do not use a water mattress with this crib.
• The maximum weight recommendation for this crib is 50 pounds.
• The maximum height recommendation for a child using this crib is 50 inches.

Image 2.1: The Greenguard Gold certification ensures low chemical emissions for a healthier nursery environment.

3. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Crib Frame Components (Headboards, Footboards, Side Rails)
• Mattress Support
• Detachable Wheels (4 units)
• Hardware Pack (bolts, nuts, washers, Allen wrench)
• Instruction Manual

4. Assembly Instructions (Setup)

Assembly is required for this product. It is recommended to have two adults for easier and safer assembly. Follow the step-by-step instructions provided in the included manual for detailed guidance. Ensure all connections are secure before use.

1. Unpack all components and verify against the package contents list.
2. Attach the side rails to the headboards and footboards using the provided hardware. Do not overtighten.
3. Install the mattress support at the desired height (refer to Section 6 for mattress height adjustment).
4. Attach the detachable wheels to the crib legs if mobility is desired. Ensure they are securely fastened.
5. Once assembled, double-check all connections for tightness and stability.

Image 4.1: Front view of the crib, illustrating the assembled structure.

Image 4.2: Side view of the crib, showing the spindle details and leg structure.

5. Conversion Instructions (Operating)

The DaVinci Jenny Lind crib is a 3-in-1 convertible design, allowing it to transform into a toddler bed and a daybed as your child grows.

5.1. Toddler Bed Conversion

To convert the crib into a toddler bed, a separate toddler conversion kit (model #M3199) is required and sold separately. Follow the instructions provided with the conversion kit to replace one of the side rails with the toddler guard rail.

5.2. Daybed Conversion

To convert the crib into a daybed, remove the front side rail. The mattress support should remain in the lowest position for safety. No additional kit is typically required for daybed conversion, but refer to your specific manual for details.

Image 5.1: Visual representation of the crib's conversion capabilities to a toddler bed and daybed.

6. Mattress Height Adjustment

The crib features four adjustable mattress positions to accommodate your child's developmental stages. Adjust the mattress height as your baby grows to ensure safety and prevent falls.

• Highest Position: For newborns, allowing easier access to your baby.
• Mid-High Position: When your baby begins to roll over.
• Mid-Low Position: When your baby can sit up unassisted.
• Lowest Position: When your baby can stand. This is the safest position to prevent climbing out.

To adjust the mattress height, carefully remove the mattress and mattress support. Re-attach the mattress support to the desired height setting, ensuring all fasteners are securely tightened. Always ensure the mattress fits snugly without gaps.

Image 6.1: This diagram shows the four adjustable mattress height settings, corresponding to a baby's growth from newborn to standing.

7. Wheels Installation and Usage

The DaVinci Jenny Lind crib includes detachable wheels for easy mobility. These wheels can be installed or removed based on your preference.

7.1. Installation

To install the wheels, insert the stem of each wheel into the pre-drilled holes at the bottom of each crib leg. Push firmly until they click into place. Ensure all four wheels are securely attached.

7.2. Usage

The wheels allow for convenient movement of the crib for cleaning or repositioning. Each wheel is equipped with a locking mechanism. To secure the crib in place, press down on the lever on each wheel until it locks. To unlock, lift the lever. Always ensure wheels are locked when the crib is stationary and in use with a child.

Image 7.1: The crib with its dimensions, clearly showing the detachable wheels at the base of each leg.

8. Care and Maintenance

Proper care and maintenance will extend the life of your crib and ensure continued safety.

• Cleaning: Wipe clean only with a soft, damp cloth. Avoid abrasive cleaners or strong chemicals, as they may damage the finish.
• Inspection: Periodically inspect the crib for loose hardware, damaged parts, or sharp edges. Tighten any loose bolts.
• Storage: If storing the crib, ensure it is clean and dry. Store in a cool, dry place away from extreme temperatures and humidity.

9. Troubleshooting

This section addresses common concerns. For issues not listed here, please contact customer support.

• Crib feels unstable: Ensure all bolts are securely tightened. Re-check assembly steps to confirm all parts are correctly installed.
• Strong odor upon unboxing: New furniture may have a temporary odor. This crib is Greenguard Gold certified for low emissions. Air out the crib in a well-ventilated area for several hours or a day. The odor should dissipate.
• Mattress does not fit snugly: Ensure you are using a standard crib mattress that meets safety standards. There should be no more than two fingers' width between the mattress and the crib sides.
• Difficulty moving crib with wheels: Check if the wheel locks are engaged. Ensure the wheels are free of debris.

10. Specifications

11. Warranty and Support

11.1. Legal Disclaimer

IN NO EVENT, REGARDLESS OF CAUSE, SHALL DaVinci BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UNDER BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND WHETHER BASED ON THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

11.2. Customer Support

For assistance with assembly, missing parts, or any other inquiries, please contact DaVinci customer support. Refer to the product packaging or the official DaVinci website for the most current contact information.

Online Support: www.davincibaby.com/support