1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Sterling Ensemble Shower Kit, model 72220100-0. This shower kit is designed with classic architectural elements and contemporary design, constructed from durable Vikrell material. It features integrated corner shelving for convenience and a high-gloss finish for ease of cleaning.
Image 1.1: Front view of the Sterling Ensemble Shower Kit, showcasing its white finish, curved back wall, and built-in corner shelves on both sides. The shower base includes a central drain opening.
2. Safety Information
Please read and understand all safety instructions before beginning installation or using the product. Failure to follow these instructions may result in injury or property damage.
- Always wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves.
- Ensure the installation area is properly prepared and structurally sound to support the shower kit.
- Follow all local plumbing and building codes.
- Do not use harsh chemicals or abrasive tools for cleaning, as this can damage the Vikrell surface.
- If you are unsure about any part of the installation process, consult a qualified professional.
3. Setup and Installation
The Sterling Ensemble Shower Kit requires proper preparation and assembly. It is recommended that installation be performed by a qualified professional to ensure correct setup and adherence to all building codes.
3.1 Pre-Installation Checks
- Verify all components are present and undamaged before beginning installation.
- Ensure the subfloor is level and capable of supporting the weight of the shower kit and water.
- Confirm plumbing rough-ins are correctly positioned according to the product's specifications.
3.2 General Installation Steps
- Prepare the installation area, ensuring walls are plumb and square.
- Install the shower base, ensuring it is level and properly supported.
- Install the shower walls, securing them to the studs as per the detailed installation guide provided with the product.
- Seal all joints and seams with a high-quality silicone sealant to prevent leaks.
- Connect the drain assembly.
- Perform a water test to check for any leaks before final finishing.
Note: Refer to the comprehensive installation guide included with your product for detailed, step-by-step instructions specific to the Sterling Ensemble Shower Kit 72220100-0.
4. Operating the Shower Kit
The Sterling Ensemble Shower Kit is designed for straightforward use. Once installed, operate your shower by using the shower valve and head (not included with the kit) as per their respective manufacturer's instructions.
- Integrated Shelving: Utilize the convenient corner shelves for storing bath accessories such as soap, shampoo, and conditioner.
- Shaving Ledge/Foot Rest: The built-in shaving ledge also functions as a foot rest, enhancing comfort during use.
5. Maintenance
Proper care and maintenance will ensure the longevity and appearance of your Sterling Ensemble Shower Kit.
5.1 Cleaning Instructions
- Clean the Vikrell surface regularly with a soft cloth or sponge and a non-abrasive, mild household cleaner.
- Rinse thoroughly with warm water after cleaning to remove all cleaner residue.
- Avoid using abrasive cleaners, scouring pads, steel wool, or harsh chemicals (e.g., acetone, paint thinner, strong acids or bases) as these can damage the high-gloss finish.
- For stubborn stains, a paste of baking soda and water can be gently applied and then rinsed.
6. Troubleshooting
This section addresses common issues you might encounter with your shower kit.
- Leaks: If leaks occur, inspect all sealed joints and plumbing connections. Reapply silicone sealant where necessary. Ensure drain connections are tight and properly sealed.
- Surface Stains: Refer to the cleaning instructions in Section 5.1. For mineral deposits, use a cleaner specifically designed for hard water stains, ensuring it is safe for Vikrell surfaces.
- Dull Finish: Ensure you are not using abrasive cleaners. Regular cleaning with mild soap and water should maintain the high-gloss finish.
For issues not covered here, or if problems persist, contact Sterling customer support or a qualified plumbing professional.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Sterling |
| Model Number | 72220100-0 |
| Material | Vikrell |
| Color | White |
| Product Dimensions (W x D x H) | 48 x 34 x 75.75 inches |
| Item Weight | 129.8 Pounds |
| Installation Type | Screw-In |
| Assembly Required | No (Refers to the kit being a complete unit, but installation is required) |
| Finish Type | Glossy |
| UPC | 087206818547 |
8. Warranty and Support
8.1 Warranty Information
The Sterling Ensemble Shower Kit 72220100-0 is covered by a 10-year consumer limited warranty and a 3-year commercial limited warranty. This warranty covers defects in material and workmanship under normal use and service. For specific terms, conditions, and exclusions, please refer to the warranty documentation included with your product or visit the official Sterling website.
8.2 Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Sterling customer support. Contact information can typically be found on the Sterling website or in the packaging materials.
