Introduction
This manual provides instructions for the installation, operation, and maintenance of the Air King BFQ110 Ceiling Mounted 100 CFM Bathroom Exhaust Fan. This fan is designed to provide ventilation for bathrooms up to 100 square feet, effectively removing humidity and odors. Please read all instructions carefully before beginning installation or operation.
Figure 1: Air King BFQ110 Bathroom Exhaust Fan, showing the main unit with grille and duct collar.
Safety Information
- Always disconnect power at the circuit breaker before installing or servicing the fan.
- Installation must comply with all local electrical codes and standards.
- This fan is UL Listed for installation over a tub or shower when connected to a GFCI (Ground Fault Circuit Interrupter) protected circuit.
- Ensure all wiring connections are secure and properly insulated.
- Do not use this fan in areas where flammable or explosive materials are present.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
Package Contents
Verify that all components are present before beginning installation:
- Fan Housing with Motor Assembly
- Mounting Bracket
- Grille
- Damper and Duct Collar (4-inch round)
- User Manual (this document)
Installation
The Air King BFQ110 features a snap-in installation system designed for ease of assembly. The fan is suitable for ceiling mounting and requires a 4-inch round ducting connection.
Required Tools and Materials (Not Included):
- Screwdriver
- Drill
- Measuring Tape
- Utility Knife or Saw
- Wire Strippers
- Electrical Tape
- Mounting Screws or Nails (for bracket)
- Ducting (4-inch round)
- Duct Tape or Clamps
Installation Steps:
- Prepare the Opening: Ensure the ceiling opening is approximately 9-1/8 inches wide by 8-1/2 inches deep. The fan unit itself measures 11.62"D x 10.75"W x 5.25"H.
- Attach the Mounting Bracket: Secure the included mounting bracket to a ceiling joist using appropriate screws or nails. Ensure the bracket is firmly attached and level.
- Connect Ducting: Attach the 4-inch round ducting to the fan's duct collar. Use duct tape or clamps to ensure a secure and airtight connection. The plastic duct collar includes a back draft damper to prevent air from re-entering the room.
- Snap-In the Fan Housing: Align the fan housing with the installed mounting bracket and snap it into place. The design allows for easy engagement with the bracket.
- Connect Wiring: Connect the electrical wiring according to local codes. The fan operates on 120 Volts. Wire nuts and a Romex connector are included. Ensure the circuit is GFCI protected if installing over a tub or shower.
- Install the Grille: Once the fan is securely mounted and wired, attach the white polymeric grille. The grille is designed for easy fitting.
Figure 2: Visual guide to the snap-in installation process, illustrating bracket attachment, fan housing placement, and electrical wiring connection.
Figure 3: Detailed dimensions of the fan unit, including the grille and duct collar, for installation planning.
Operation
The Air King BFQ110 exhaust fan is designed for continuous operation and provides 100 Cubic Feet Per Minute (CFM) airflow. It is suitable for ventilating bathrooms up to 100 square feet and other spaces up to 125 square feet.
Noise Level:
The fan operates at a noise level of 3.5 Sones. Sones are a unit of perceived loudness. For reference, a typical conversation is around 3.0 Sones.
Figure 4: Comparison of the fan's sound level (3.5 Sones) against common environmental sounds.
Figure 5: Recommended room size capacity for the 100 CFM airflow.
Maintenance
Regular cleaning and inspection will help maintain the fan's performance and longevity.
Cleaning the Grille:
- Disconnect power to the fan at the circuit breaker.
- Carefully remove the grille from the fan housing.
- Wash the grille with mild soap and water. Rinse thoroughly and allow it to dry completely before reattaching.
Cleaning the Fan Interior:
- With the power disconnected and grille removed, gently vacuum or wipe the fan blades and interior surfaces to remove dust and debris.
- Do not use abrasive cleaners or solvents.
- Ensure all components are dry before restoring power.
The fan features a high-impact plastic housing that resists rust and corrosion, making it suitable for high-moisture environments and contributing to its durability.
Figure 6: View of the fan's high-impact plastic housing, designed for durability and rust resistance.
Figure 7: The fan's white polymeric grille, designed for easy removal and cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power supply; Loose wiring; Motor malfunction | Check circuit breaker; Verify wiring connections; Contact qualified electrician for motor issues. |
| Excessive noise | Loose mounting; Debris in fan blades; Motor issue | Ensure fan is securely mounted; Clean fan blades; If noise persists, consult a professional. |
| Poor ventilation | Blocked ducting; Incorrect fan size for room; Dirty fan blades | Inspect and clear ducting; Clean fan blades; Ensure fan CFM matches room size requirements. |
If issues persist after attempting these solutions, it is recommended to contact a qualified electrician or the manufacturer's customer support.
Specifications
| Feature | Specification |
|---|---|
| Model Number | BFQ110 |
| Air Flow Capacity | 100 Cubic Feet Per Minute (CFM) |
| Noise Level | 3.5 Sones |
| Voltage | 120 Volts |
| Wattage | 72.5 watts |
| Speed | 1625 RPM |
| Product Dimensions (D x W x H) | 11.62" x 10.75" x 5.25" |
| Housing Size (W x D x H) | 9-1/8" x 8-1/2" x 4-3/4" |
| Duct Collar Size | 4 Inches (Round) |
| Item Weight | 4.2 Pounds |
| Color | White |
| Certifications | CULus-listed, HVI 2100-certified, Title 24 compliant, ASHRAE 62.2 approved |
Warranty
The Air King BFQ110 Bathroom Exhaust Fan comes with a 1-Year parts only warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact Air King customer support.
Support
For technical assistance, replacement parts, or warranty claims, please contact Air King customer support. Have your model number (BFQ110) and date of purchase available when contacting support.
You can find contact information on the official Air King website or through your product documentation.
