Alarm Lock T2 DL2700IC26D Electronic Digital Keypad Lock Leverset User Manual

1. Introduction

The Alarm Lock T2 DL2700IC26D is a standalone electronic digital keypad cylindrical lock leverset designed for secure keyless entry. This lock supports up to 100 user entry codes, each 3 to 5 digits long, and is suitable for interior door installations. It features a satin chrome finish and a reversible lever handle for adaptable operation. This manual provides essential information for the proper installation, operation, and maintenance of your Alarm Lock T2 leverset.

Figure 1: Alarm Lock T2 DL2700IC26D Electronic Digital Keypad Lock Leverset. This image displays the complete lock leverset with its keypad and handle in a satin chrome finish.

Key Features:

• Electronic digital lock leverset programmable through the keypad for 100 user entry codes.
• Cylindrical lock mechanism compatible with a standard interchangeable core for key override (core sold separately).
• Designed for installation on interior doors.
• Lever handle is reversible for right- or left-hand operation.
• Stainless steel trim with satin chrome finish resists corrosion.

2. Package Contents

Verify that all components are present before beginning installation:

• Trilogy T2 electronic digital keypad leverset
• Latch cylinder
• Strike plate
• Latch cover
• Battery pack with 5 AA batteries

3. Setup and Installation

This section outlines the general steps for installing the Alarm Lock T2 leverset. Professional installation is recommended to ensure proper function and security.

Door Preparation:

• Ensure your door thickness is between 1-5/8 to 1-7/8 inches.
• The lock requires two bored perpendicular holes: one in the door face and a crossbore hole in the door edge.
• The backset width required is 2-3/4 inches.

Lever Handle Orientation:

The lever handle is reversible. Determine if your door requires a right-hand or left-hand operation and adjust the lever accordingly during assembly.

Interchangeable Core Installation:

The leverset is designed to accept a standard interchangeable core from manufacturers such as Best, Falcon, Arrow, or KSP (sold separately). Install the core according to the core manufacturer's instructions to enable key override functionality.

Battery Installation:

1. Locate the battery compartment, typically on the interior side of the lock.
2. Insert the 5 AA batteries provided, ensuring correct polarity.
3. Close the battery compartment securely.

4. Operating Instructions

This section details how to operate your Alarm Lock T2 leverset for daily use and programming.

Entering User Codes:

1. Press the desired 3 to 5 digit user code on the keypad.
2. The lock will provide LED indicators and an audible sound to confirm code entry.
3. Turn the lever handle to open the door.
4. The lock automatically re-locks when the door is closed after passage.

Programming User Codes:

The lock can be manually programmed through the keypad to add, delete, or modify user entry codes. Refer to the detailed programming guide included with your product for specific instructions on master code setup and user code management.

Key Override:

If an interchangeable core is installed, a physical key can be used to engage or release the lock mechanism, bypassing the electronic keypad. Insert the key into the core and turn as required.

5. Maintenance

Proper maintenance ensures the longevity and reliable operation of your lock.

Battery Replacement:

The lock is powered by 5 AA batteries, which provide approximately 120,000 cycles. Replace batteries when the low battery indicator appears or if the lock's response becomes sluggish. Always replace all 5 batteries simultaneously with new, high-quality alkaline AA batteries.

Cleaning:

Clean the lock's exterior with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.

6. Troubleshooting

If you encounter issues with your Alarm Lock T2 leverset, refer to the following common troubleshooting steps:

• Lock Not Responding: Check battery levels and replace if necessary. Ensure batteries are inserted with correct polarity.
• Codes Not Working: Verify that the correct user code is being entered. Ensure the lock is not in a lockout mode. Re-program the code if unsure.
• Lever Not Engaging: Check for any obstructions around the latch bolt or strike plate. Ensure the lock is properly aligned with the door frame.
• Intermittent Operation: This may indicate low battery power. Replace batteries.

For persistent issues, contact Alarm Lock customer support or consult a qualified locksmith.

7. Specifications

8. Safety Information

• Do not attempt to disassemble or repair the lock yourself. This may void the warranty and could lead to malfunction.
• Use only the specified battery type (5 AA alkaline batteries). Mixing battery types or using rechargeable batteries not designed for this device may cause damage.
• Keep the keypad clean and free from debris to ensure proper operation.
• Ensure all programming codes are kept confidential to maintain security.

9. Warranty and Support

Alarm Lock Systems, Inc. provides a manufacturer's warranty for this product. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Alarm Lock website.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Alarm Lock customer service directly. Contact information can typically be found on the manufacturer's website or in the product packaging.