1. Introduction
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your Scheppach RS400 Rotary Sieve. Please read these instructions carefully before using the machine for the first time. Keep this manual in a safe place for future reference.

Image 1.1: The Scheppach RS400 Rotary Sieve, a robust machine designed for efficient material screening.
2. Safety Instructions
Always observe general safety regulations when operating electrical equipment. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Read the entire manual: Understand all warnings and operating instructions before use.
- Wear appropriate personal protective equipment (PPE): This includes safety glasses, gloves, and sturdy footwear.
- Ensure a stable work area: Operate the sieve on a firm, level surface.
- Keep children and bystanders away: Maintain a safe distance from the operating machine.
- Disconnect power: Always unplug the machine before performing any adjustments, maintenance, or when not in use.
- Do not overload: Avoid feeding excessive material into the drum, which can cause blockages or motor strain.
- Inspect for damage: Before each use, check the power cord, plug, and machine for any signs of damage. Do not use if damaged.
3. Product Features and Description
The Scheppach RS400 Rotary Sieve is designed for separating various materials such as soil, sand, and compost. Its robust construction and powerful motor ensure efficient screening.
- Sieving Drum: Features a Ø400 mm diameter and 900 mm length.
- Adjustable Inclination: The drum's inclination can be adjusted in steps to control material flow.
- Mesh Openings: Standard mesh opening of Ø20 mm, with an additional 10 mm mesh insert included for finer screening.
- Rotation Speed: The screening drum operates at 42 revolutions per minute (min-1).
- Material Throughput: Capable of processing up to 3 m³/h, depending on the material.
- Powerful Motor: Equipped with a 360 W motor for reliable performance.
- Integrated Brush Strip: A standard brush strip ensures continuous cleaning of the sieve drum, particularly useful for damp materials.
- Mobility: Fitted with wheels for easy transport and positioning.
- Clear Feed Opening: The double-sided suspension of the sieve drum with V-belts ensures an unobstructed feed opening.

Image 3.1: Key features including mesh sizes, throughput capacity, and adjustable drum inclination.

Image 3.2: Illustration of the powerful 360W motor and the drum's rotation speed of 42 RPM.

Image 3.3: The standard brush strip ensures reliable cleaning of the sieve drum, especially when using damp material.
4. Setup and Assembly
The Scheppach RS400 Rotary Sieve requires some assembly. Follow these general steps for safe and correct setup. Refer to the detailed assembly diagrams provided with your product packaging for specific instructions.
- Unpack Components: Carefully remove all parts from the packaging and check against the parts list.
- Assemble Frame: Connect the frame components using the provided bolts and nuts. Ensure all connections are secure.
- Attach Wheels: Mount the wheels to the designated points on the frame for mobility.
- Install Sieve Drum: Carefully place the sieve drum into its suspension points. Ensure the V-belts are correctly positioned for the double-sided suspension, allowing a free feed opening.
- Mount Motor Unit: Secure the motor unit to the frame, ensuring proper alignment with the sieve drum's drive mechanism.
- Connect Power: Once fully assembled, connect the machine to a suitable power supply.

Image 4.1: The rotary sieve is mobile thanks to its standard wheels, allowing it to be used in various locations.

Image 4.2: The double-sided suspension of the sieve drum with V-belts ensures the feed opening remains completely clear for easy material input.
5. Operating Instructions
Follow these steps for effective and safe operation of your rotary sieve.
- Position the Sieve: Place the sieve on a stable, level surface. Ensure adequate space around the machine for material input and output.
- Set Inclination: Adjust the drum's inclination angle according to the material type and desired throughput speed. A steeper angle increases throughput but may reduce screening effectiveness for very fine materials.
- Prepare Collection Bins: Position suitable collection bins or wheelbarrows at the output end of the sieve for screened material and at the waste end for larger debris.
- Start the Machine: Plug in the power cord and switch on the machine. Allow the drum to reach its operating speed before feeding material.
- Feed Material: Gradually feed the material (soil, sand, compost) into the sieve drum. Avoid sudden large loads. The sieve is suitable for screening earth, sand, and compost.
- Monitor Operation: Observe the screening process. If material is not flowing correctly or the drum becomes clogged, switch off the machine immediately and investigate.
- Stop the Machine: Once screening is complete, switch off the machine and unplug it from the power supply.

Image 5.1: The Scheppach RS400 Rotary Sieve is suitable for screening various materials including earth, sand, and compost.

Image 5.2: By adjusting the inclination angle, you can regulate the throughput speed of the screened material.

Image 5.3: The screened humus is ideal for new bed creation and for refining, loosening firm, older soil in beds.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Scheppach RS400 Rotary Sieve.
- Cleaning: After each use, clean the sieve drum and frame. The integrated brush strip helps keep the drum clean during operation, but manual cleaning may be required for stubborn residue.
- Brush Strip Inspection: Regularly check the brush strip for wear and tear. Replace if bristles are significantly worn to maintain effective drum cleaning.
- Motor and Electrical Components: Keep the motor housing clean and free from debris. Inspect the power cord and plug for any damage.
- Lubrication: Check the manufacturer's recommendations for any lubrication points.
- Storage: Store the machine in a dry, protected area when not in use.
7. Troubleshooting
This section addresses common issues you might encounter with your rotary sieve.
- Machine does not start:
- Check if the power cord is securely plugged into a working outlet.
- Verify that the power switch is in the 'ON' position.
- Check for tripped circuit breakers or blown fuses.
- Material not sieving effectively:
- Adjust the drum's inclination angle. A flatter angle may improve screening for finer materials.
- Reduce the amount of material being fed into the drum to prevent overloading.
- Clean the sieve mesh and brush strip if clogged with damp material.
- Unusual noise or vibration:
- Switch off the machine immediately.
- Check for foreign objects inside the drum or around moving parts.
- Inspect for loose bolts or damaged components.
If you encounter problems not listed here or if troubleshooting steps do not resolve the issue, contact Scheppach customer support.
8. Technical Specifications
| Specification | Value |
|---|---|
| Model Number | RS400 (42030000) |
| Manufacturer | Scheppach |
| Dimensions (L x W x H) | 102 x 48 x 78 cm |
| Weight | 37.6 kg |
| Motor Power | 360 W |
| Sieving Drum Diameter | Ø400 mm |
| Sieving Drum Length | 900 mm |
| Drum Rotation Speed | 42 min-1 |
| Standard Mesh Opening | Ø20 mm |
| Included Mesh Insert | 10 mm |
| Material Throughput | Up to 3 m³/h |
9. Warranty and Support
Warranty information for the Scheppach RS400 Rotary Sieve is not provided within the product data. Please refer to the warranty card included with your purchase or contact your retailer for specific warranty terms and conditions.
For technical support, spare parts, or service inquiries, please contact Scheppach customer service directly or visit their official website. Information regarding spare parts availability was not provided in the product data.