EltaMD 02500

Download PDF
Contents

EltaMD UV Clear Face Sunscreen SPF 46 Instruction Manual

Model: 02500

Brand: EltaMD

1. Product Overview

EltaMD UV Clear Face Sunscreen SPF 46 is a dermatologist-recommended, oil-free facial sunscreen designed to protect and calm sensitive skin types prone to acne, rosacea, and discoloration. Formulated with zinc oxide, it provides broad-spectrum UVA/UVB protection while remaining lightweight and silky on the skin.

EltaMD UV Clear Face Sunscreen SPF 46 bottle

Image: EltaMD UV Clear Face Sunscreen SPF 46 product bottle.

2. Key Features

  • SPF 46 Broad-Spectrum Protection: Provides effective protection against both UVA (aging) and UVB (burning) rays.
  • Oil-Free Formula: Designed to be lightweight and non-greasy, suitable for various skin types, including oily and acne-prone skin.
  • Zinc Oxide Based: Contains 9.0% transparent zinc oxide, a natural mineral compound that reflects and scatters UVA and UVB rays.
  • Niacinamide (Vitamin B3): Helps to reduce redness, calm sensitive skin, and improve the appearance of skin discoloration.
  • Vitamin E: Neutralizes free radical damage to help reduce the visible signs of aging.
  • Non-Comedogenic: Formulated not to clog pores, reducing the likelihood of breakouts.
  • Fragrance-Free, Paraben-Free, Dye-Free, Hypoallergenic: Minimizes the risk of irritation for sensitive skin.
  • Dermatologist Tested: Clinically evaluated for safety and efficacy.
EltaMD UV Clear features including UVA/UVB protection, no residue, and niacinamide

Image: Visual representation of key features such as UVA/UVB protection, suitability for makeup, no residue, calming acne-prone skin, and niacinamide benefits.

EltaMD UV Clear icons for oil-free, fragrance-free, paraben-free, hypoallergenic, dye-free, noncomedogenic, and dermatologist tested

Image: Icons indicating product attributes: oil-free, fragrance-free, paraben-free, hypoallergenic, dye-free, noncomedogenic, and dermatologist tested.

3. Setup: Priming the Airless Pump

The airless pump packaging may require several pumps (up to 30 times) for the product to dispense initially. This is normal due to the design of the airless system, which uses a vacuum to dispense product and keep it fresh. Follow these steps to prime the pump:

  1. With the cap cover in place over the pump, turn the container upside down.
  2. Tap the bottom of the container firmly 8-10 times into the palm of your hand.
  3. Return the container to its upright position.
  4. Remove the cap, and with the nozzle pointed away from your face, press the pump to dispense the product. It may take several pumps to completely prime the pump and allow the actuator to deliver the product consistently.
Instructions on how to dispense product from an airless pump

Image: Step-by-step guide for priming the airless pump to ensure proper product dispensing.

4. Operating Instructions

For optimal sun protection, apply EltaMD UV Clear Face Sunscreen as directed:

  • Apply liberally to your face and neck 15 minutes before sun exposure.
  • Reapply at least every 2 hours, or immediately after towel drying, swimming, or sweating.
  • This facial sunscreen can be worn alone or under makeup.

5. Maintenance

To maintain the quality and efficacy of your EltaMD UV Clear Face Sunscreen:

  • Store the product at room temperature, away from excessive heat and direct sunlight.
  • Keep the cap securely closed when not in use to prevent contamination and drying.
  • Do not dilute the product or mix it with other substances.

6. Troubleshooting

If you experience difficulty dispensing the product from the airless pump:

  • Pump Not Dispensing: Refer to the "Setup: Priming the Airless Pump" section (Section 3) and repeat the priming steps. The airless pump may require multiple taps and pumps to initiate flow, especially upon first use or after prolonged periods of non-use.
  • Inconsistent Dispensing: If the pump continues to fail after repeating steps 1 through 3, try tapping slightly harder to force the liquid into the actuator. Ensure the bottle is upright when attempting to pump.

7. Specifications

AttributeValue
Product Dimensions1.5 x 1.5 x 4.5 inches
Item Weight1.7 ounces
Item Model Number02500
ManufacturerEltaMD
Sun Protection Factor (SPF)46
ScentFragrance Free
Number of Items1

8. Ingredients

EltaMD UV Clear Face Sunscreen SPF 46 contains a carefully selected blend of active and inactive ingredients to provide effective sun protection and skin benefits.

Active Ingredients:

  • Octinoxate 7.5%
  • Zinc Oxide 9.0%

Inactive Ingredients:

Water, Cyclopentasiloxane, Niacinamide, Octyldodecyl Neopentanoate, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Butylene Glycol, Phenoxyethanol, Polyisobutene, Triethoxycaprylylsilane, Tocopheryl Acetate, PEG-7 Trimethylolpropane Coconut Ether, Oleth-3 Phosphate, Iodopropynyl Butylcarbamate, Lactic Acid, Sodium Hyaluronate, Phosphoric Acid.

Active and Inactive Ingredients list for EltaMD UV Clear

Image: Detailed list of active and inactive ingredients.

9. Safety Information

Please observe the following safety precautions when using this product:

  • For external use only.
  • Do not use on damaged or broken skin.
  • When using this product, keep out of eyes. Rinse with water to remove.
  • Stop use and ask a doctor if rash occurs.
  • Keep out of reach of children. If product is swallowed, get medical help or contact a Poison Control Center right away.
  • Protect the product in this container from excessive heat and direct sun.

10. Warranty and Support

For product support, inquiries, or information regarding any applicable warranties, please contact EltaMD customer service directly through their official website or the retailer from whom the product was purchased. Please retain your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.