Important Safety Information
Please read all instructions carefully before beginning installation. Failure to follow these instructions may result in electrical shock, fire, or other hazards, which could cause personal injury or property damage.
- Professional Installation Recommended: Installation should be performed by a qualified electrician.
- Disconnect Power: Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the fixture.
- Grounding: Ensure the fixture is properly grounded to avoid potential electrical shock.
- Weight Capacity: The electrical box must be rated for a minimum of 102 lbs (46 kg).
- Bulb Specifications: Use only bulbs that meet the specified type and wattage to prevent overheating.
Package Contents
Verify that all components are present before beginning installation:
- Lighting Fixture (Chandelier frame)
- Mounting Hardware
- Instruction Sheets
- Certificate of Authenticity
- Manufacturer Warranty Certificate
Installation Instructions
Mounting the Fixture
The chandelier is designed for ceiling mounting. Ensure the electrical box is securely installed and rated to support the fixture's weight of 102 pounds.
- Turn off power at the circuit breaker.
- Attach the mounting bracket to the electrical box using the provided hardware.
- Connect the fixture's ground wire to the supply ground wire. Connect the white fixture wire to the white supply wire and the black fixture wire to the black supply wire. Secure all connections with wire nuts.
- Hang the chandelier using the included 120-inch chain. The chain length can be adjusted to achieve the desired suspension height. The fixture includes 180 inches of total wire, allowing for a maximum suspension of up to 232.5 inches with additional chain (sold separately).
- The fixture can be installed on a sloped ceiling up to a 45-degree angle.
- Secure the canopy to the mounting bracket, ensuring all wires are tucked safely inside.
Image: The Schonbek La Scala Chandelier, showcasing its Heirloom Gold finish and Clear Heritage Handcut Crystals. This image provides an overview of the chandelier's complete structure before installation.
Crystal Assembly
The crystals are typically packaged separately to prevent damage during transit. Carefully unpack and attach each crystal element according to the detailed diagrams provided in the included instruction sheets. Ensure each crystal is securely fastened to its designated location on the chandelier frame.
Image: A detailed view of the chandelier's central section, highlighting the intricate arrangement of crystal drops, rosettes, and candelabra-style bulb holders. This image is useful for crystal attachment reference.
Operation
Bulb Installation
This chandelier requires 24 E12 base, B10 shape 120V light bulbs. The maximum wattage for incandescent bulbs is 60W, or use equivalent LED bulbs (bulbs sold separately). Ensure bulbs are fully seated in their sockets.
Dimming Functionality
The fixture supports smooth and continuous dimming when used with a compatible dimmer switch. Consult a qualified electrician for dimmer installation if not already present.
Maintenance
Cleaning Crystals
To maintain the brilliance of your Heritage Handcut Crystals, regular cleaning is recommended. Always turn off the power to the fixture and allow it to cool before cleaning.
- Use a soft, lint-free cloth, slightly dampened with distilled water or a mild, non-abrasive glass cleaner.
- Gently wipe each crystal. Avoid harsh chemicals or abrasive materials that could scratch the crystal surface or damage the finish.
- For intricate areas, a soft brush can be used.
Image: A close-up of a crystal bobeche and hanging crystal prisms. This detail highlights the facets and clarity of the Heritage Handcut Crystals, emphasizing areas that require careful cleaning.
Bulb Replacement
Before replacing any bulbs, ensure the power to the fixture is turned off at the circuit breaker and the bulbs have cooled. Carefully unscrew the old bulb and screw in the new bulb, ensuring it is the correct type and wattage.
Troubleshooting
If your chandelier is not functioning correctly, perform the following basic checks:
- No Light: Check the circuit breaker to ensure power is on. Verify that all bulbs are securely screwed in and are not burnt out. Inspect wire connections for looseness.
- Flickering Lights: Ensure bulbs are fully tightened. If using a dimmer, confirm it is compatible with the installed bulbs and properly wired.
- Partial Lighting: Check individual bulbs for functionality. Replace any non-working bulbs.
For issues not resolved by these steps, contact a qualified electrician or Schonbek customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Name | La Scala |
| Part Number | 5013-22 |
| Product Dimensions | 46"L x 46"W x 48"H |
| Item Weight | 102 Pounds |
| Material | Alloy Steel, Crystal |
| Finish Type | Powder Coated (Heirloom Gold) |
| Shade Material | Crystal |
| Crystal Type | Clear Heritage Handcut Crystals |
| Number of Light Sources | 24 |
| Bulb Base | E12 |
| Max Wattage per Bulb | 60W (Incandescent or LED equivalent) |
| Voltage | 120 Volts |
| Total Wattage | 1440 watts (max) |
| Brightness | 10080 Lumens (max) |
| Room Type | Bathroom, Corridor, Dining Room, Kitchen, Living Room |
| Indoor/Outdoor Usage | Indoor use only |
| Assembly Required | Yes |
| Standards | UL, cUL, CSA rated for indoor locations |
| UPC | 771857032840 |
Image: This graphic illustrates the characteristics of different crystal types, including Heritage Handcut Crystal, which is featured in this chandelier. It highlights the craftsmanship and optical qualities.
Warranty Information
This Schonbek La Scala Chandelier is covered by a 5-year manufacturer's warranty. Please refer to the included Manufacturer Warranty Certificate for full terms and conditions regarding coverage and claims.
Customer Support
For technical assistance, replacement parts, or any questions not covered in this manual, please contact Schonbek customer support. Ensure you have your model number (5013-22) and purchase information available when contacting support.
