1. Introduction
This manual provides essential information for the safe and effective use of the Yamato Nori Rice Sticking Paste. This product is a traditional, non-toxic adhesive made from natural rice starch, suitable for various paper-based crafting and artistic applications.
Please read these instructions thoroughly before first use and retain this manual for future reference.
2. Product Overview
The Yamato Nori Rice Sticking Paste is a versatile, clear, and colorless adhesive that dries clear. It is formulated to be acid-free and non-toxic, making it suitable for delicate materials and safe for general use. The paste is supplied in an easy-to-squeeze tube for convenient application.
Figure 1: Yamato Nori Rice Sticking Paste 220g tube. This image displays the green squeeze tube with a yellow cap, featuring embossed Japanese text and a brand logo.
Key Features:
- Made from natural rice starch (tapioca starch).
- Non-toxic and acid-free formulation.
- Dries clear and colorless.
- Easy-to-squeeze tube for controlled application.
- Consistent viscosity with a long drying time, allowing for repositioning.
- Ideal for thin and delicate papers, including washi, chiyogami, and katazome-shi.
3. Setup
- Preparation: Ensure your work surface is clean, dry, and protected. Have any necessary tools such as brushes, spatulas, or applicators ready.
- Opening the Tube: Twist the yellow cap counter-clockwise to open. If the nozzle is sealed, carefully cut the tip to the desired opening size.
- First Use: Squeeze a small amount of paste onto a scrap piece of paper or a palette to ensure smooth flow and remove any air bubbles.
4. Operating Instructions
The Yamato Nori Rice Sticking Paste is designed for adhering paper products. Its long drying time allows for adjustments during application.
Application Methods:
- Direct Application: For larger areas, apply a thin, even layer directly from the tube onto one of the surfaces to be joined.
- Brush/Spatula Application: Squeeze a small amount onto a palette. Use a brush or spatula to spread a thin, even coat onto the desired surface. This method is recommended for delicate papers or precise application.
- Finger Application: Due to its non-toxic nature, the paste can be applied with fingertips for certain crafting techniques. Wash hands thoroughly after use.
Bonding Process:
- Apply a thin, even layer of paste to one of the surfaces. Avoid excessive application to prevent wrinkling or extended drying times.
- Carefully position the second surface onto the first. The extended drying time allows for repositioning if needed.
- Gently press down to ensure good contact and remove any air bubbles. Use a brayer or a clean cloth to smooth the surfaces.
- Allow the adhesive to dry completely. Drying time varies depending on the amount of paste used, humidity, and paper thickness.
Recommended Uses:
- Scrapbooking
- Bookbinding
- Origami
- Chine collé
- General paper crafting
Note: This paste is not water-resistant and is generally not recommended for heavy papers like watercolor or mixed media types, as they may peel off.
5. Maintenance
- Cleaning Tools: Clean brushes, spatulas, and any other tools immediately after use with water. The paste is water-soluble when wet.
- Tube Storage: After each use, securely close the yellow cap to prevent the paste from drying out.
- Storage Conditions: Store the tube in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Paste not flowing from tube. | Nozzle clogged or not cut open. | Ensure the nozzle tip is cut open. Use a thin wire or pin to clear any dried paste from the opening. |
| Paper wrinkling after application. | Too much paste applied; paper is too thin or absorbent. | Apply a thinner, more even layer of paste. For very thin papers, consider diluting the paste slightly with water (test first). |
| Adhesive not holding. | Insufficient paste; surfaces not clean; paste not fully dried; unsuitable material. | Ensure a sufficient, even layer is applied. Clean surfaces before application. Allow adequate drying time. Note that this paste is best for paper and not water-resistant. |
| Paste has dried in the tube. | Cap not securely closed; prolonged storage. | Ensure the cap is always tightly sealed after use. If completely dried, the product may need replacement. |
7. Specifications
| Brand | Yamato |
| Model Number | T-220 |
| Item Form | Paste |
| Material | Rice Starch (Tapioca Starch) |
| Color | Clear (dries clear) |
| Net Weight | 220g (approximately 7.76 ounces) |
| Product Dimensions | 8.5 x 1.6 x 0.9 inches (approximate tube dimensions) |
| Specific Uses | Craft, Paper (e.g., scrapbooking, bookbinding, origami, chine collé) |
| Special Features | Non-toxic, Acid-free, Long drying time, Easy-to-squeeze tube |
| Water Resistance | Not Water Resistant |
| UPC | 000049763140 |
8. Warranty Information
Specific warranty information for the Yamato Nori Rice Sticking Paste (Model T-220) is not provided in the available product data. For details regarding product guarantees or return policies, please refer to your point of purchase or contact the manufacturer directly.
9. Support
For further assistance, questions, or concerns regarding the Yamato Nori Rice Sticking Paste, please contact the manufacturer or your retailer. Contact information is typically available on the product packaging or the official Yamato website.