1. Product Overview
This manual provides instructions for the SINGER Foot Controller and Power Cord, Model 359102001. This unit serves as a combined foot pedal and power supply for compatible SINGER sewing machines, enabling control over sewing speed and providing electrical power.
1.1. Key Features
- Integrated foot controller and power cord.
- Genuine SINGER replacement part.
1.2. Compatible SINGER Sewing Machine Models
This foot controller and power cord is compatible with the following SINGER sewing machine models:
- Singer 1105
- Singer 1116
- Singer 1120
- Singer 1130
- Singer 118
- Singer 1525
- Singer 1725
- Singer 1748
- Singer 2639
- Singer 2662
- Singer 2712
- Singer 2722
- Singer 2732
- Singer 2718
- Singer 2724
- Singer 2730
- Singer 3116 Simple
- Singer 3709
- Singer 3722
- Singer 3810
- Singer 3820
- Singer 3825
- Singer 3962
- Singer 4102
- Singer 4205 Inspiration
- Singer 4206 Inspiration
- Singer 4210 Inspiration
- Singer 4212 Inspiration
- Singer 4220 Inspiration
- Singer 4228 Inspiration
- Singer 6510
- Singer 6550
- Singer 7312
- Singer 7322
- Singer 7350
- Singer 14T98DS
2. Setup Instructions
Follow these steps to properly connect the foot controller and power cord to your SINGER sewing machine.
2.1. Connecting the Foot Controller to the Sewing Machine
- Identify the Connector Port: Locate the power and foot controller input port on your SINGER sewing machine. This port typically has three holes designed to receive the three-pin connector of the foot controller.
- Align the Connector: Take the three-pin connector end of the foot controller cord. Carefully align the three pins with the corresponding holes in the sewing machine's input port. Ensure the connector is oriented correctly to avoid bending the pins.
- Insert the Connector: Gently push the connector firmly into the port until it is fully seated. Do not force the connection.
Image: Three-pin connector for the sewing machine input.
Image: Connector dimensions for proper fit.
2.2. Connecting to Power Outlet
- Ensure Machine is Off: Before plugging into a power outlet, ensure your sewing machine's power switch is in the OFF position.
- Plug into Outlet: Insert the two-prong power plug into a standard electrical wall outlet. Ensure the outlet provides the correct voltage (120V AC for North American models).
Image: Power plug with voltage specifications.
Image: Complete foot controller and power cord assembly.
Image: SINGER Foot Controller and Power Cord.
3. Operating Instructions
Once the foot controller is properly connected, you can begin operating your sewing machine.
3.1. Controlling Sewing Speed
- Turn On Machine: Flip the power switch on your sewing machine to the ON position. The machine's light may illuminate.
- Apply Pressure: Place your foot on the foot pedal. The sewing machine's speed is directly controlled by the amount of pressure you apply to the pedal.
- Increase Speed: Press down gently for slower speeds. Increase pressure for faster sewing speeds.
- Stop Sewing: Release pressure from the pedal to stop the machine.
4. Care and Maintenance
Proper care ensures the longevity and reliable performance of your foot controller.
- Cleaning: Wipe the foot controller and cord with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the pedal mechanism.
- Storage: When not in use, store the foot controller and cord in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly wrapping the cord.
- Inspection: Periodically inspect the cord for any signs of damage, such as fraying, cuts, or exposed wires. If damage is observed, discontinue use and replace the unit.
5. Troubleshooting
If you encounter issues with your foot controller, refer to the following common problems and solutions.
5.1. Sewing Machine Does Not Power On
- Check Connections: Ensure the three-pin connector is fully inserted into the sewing machine's port and the power plug is securely in the wall outlet.
- Verify Power: Test the wall outlet with another appliance to confirm it is receiving power. Check your home's circuit breaker if necessary.
- Machine Power Switch: Confirm the sewing machine's power switch is in the ON position.
5.2. No Speed Control or Machine Runs at Full Speed
- Pedal Functionality: Ensure the foot pedal mechanism moves freely and returns to its resting position when pressure is released.
- Internal Issue: If the machine consistently runs at full speed or has no speed variation despite pedal pressure, there may be an internal issue with the foot controller or the sewing machine itself. Consider contacting SINGER customer support or a qualified technician.
5.3. Intermittent Power or Operation
- Cord Damage: Inspect the entire length of the power cord and foot controller cord for any visible damage, such as cuts, kinks, or exposed wiring. Damaged cords can cause intermittent power.
- Loose Connections: Re-seat all connections, ensuring they are firm and secure.
6. Product Specifications
| Specification | Detail |
|---|---|
| Brand | SINGER |
| Model Number | 359102001 |
| Product Dimensions | 6.1 x 4.7 x 2.1 inches |
| Item Weight | 10.6 ounces |
| Material | Plastic |
| Manufacturer | Singer |
| ASIN | B002L2Z73A |
| UPC | 798804837419, 037431889041 |
| Batteries Required | No |
7. Warranty and Support
For warranty information or technical support regarding your SINGER Foot Controller and Power Cord, please refer to the documentation included with your original sewing machine or visit the official SINGER website.
You can also contact SINGER customer service directly for assistance with product-specific inquiries or troubleshooting beyond the scope of this manual.
