Intermec 1-974028-025 AC Power Cord User Manual

Product Overview

The Intermec 1-974028-025 AC Power Cord is a standard electrical cable designed to supply power to compatible electronic devices. It features a male NEMA 5-15P plug for connecting to a standard US wall outlet and a female IEC C13 connector for connecting to the device's power input. This cord is built for reliability and performance, adhering to RoHS compliance standards.

Figure 1: The Intermec 1-974028-025 AC Power Cord. This image shows the black power cord coiled, with the two-prong NEMA 5-15P plug visible at one end and the three-hole IEC C13 connector at the other end.

Setup

Follow these steps to properly set up your Intermec AC Power Cord:

1. Inspect the Cord: Before use, visually inspect the entire length of the power cord for any signs of damage, such as cuts, frayed insulation, or bent prongs. Do not use a damaged cord.
2. Identify Connectors: Locate the NEMA 5-15P plug (the end with two flat prongs and one round grounding pin, if applicable) and the IEC C13 connector (the end with three rectangular holes).
3. Connect to Device: Insert the IEC C13 connector firmly into the corresponding power input port on your electronic device. Ensure it is fully seated.
4. Connect to Power Outlet: Insert the NEMA 5-15P plug into a standard, grounded 120V AC wall outlet. Ensure the outlet is easily accessible.
5. Verify Connection: Confirm that both ends of the power cord are securely connected before powering on your device.

Operating Instructions

Once the Intermec AC Power Cord is properly connected, the operation is straightforward:

• The power cord facilitates the transfer of electrical power from the wall outlet to your compatible device.
• Ensure the device connected to the power cord is rated for the voltage and current supplied by the outlet and the cord.
• To disconnect power, always grasp the plug firmly and pull it directly from the outlet. Do not pull on the cord itself.
• Similarly, disconnect the IEC C13 connector from the device by grasping the connector body, not the cable.

Maintenance

Proper maintenance extends the life of your power cord and ensures safe operation:

• Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, coil the power cord loosely. Avoid tight coiling or bending, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Damage Inspection: Periodically inspect the cord for any signs of wear, such as cracks, kinks, or exposed wiring. Replace the cord immediately if any damage is observed.
• Avoid Overloading: Do not use the power cord with devices that exceed its rated electrical capacity.

Troubleshooting

If you experience issues with your Intermec AC Power Cord, consider the following:

• Device Not Powering On:
  • Ensure both ends of the power cord are fully and securely plugged into the device and the wall outlet.
  • Check if the wall outlet is functional by plugging in another known working device.
  • Verify that the device itself is turned on and functioning correctly.
  • Inspect the power cord for any visible damage. If damaged, replace it.
• Loose Connection:
  • If the cord feels loose in the outlet or device, ensure it is the correct type of cord for the connection.
  • Avoid placing tension on the cord that could pull it out of the socket.

If troubleshooting steps do not resolve the issue, and you suspect the power cord is faulty, discontinue use and replace it with a new, compatible cord.

Specifications

Warranty and Support

Specific warranty information for the Intermec 1-974028-025 AC Power Cord is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please refer to the documentation provided with your original purchase or contact Intermec customer service directly.

You may also visit the official Intermec website for further assistance and product information.