Introduction
The Vortex VTX12XL V-Series 2050 Fan is a high-performance inline duct blower designed for efficient air movement in various applications. Constructed from quality steel with a durable hammertone powder coat finish, this fan ensures reliable and quiet operation. Its mixed-flow impeller design allows for greater air volume compared to other comparable impellers, while operating at lower RPMs for reduced noise.
Key features include:
- Extended collar and lip for easy duct hook-up.
- Aerodynamic design for optimized airflow.
- Heavy gauge steel casing with hammertone powder coat finish for sound absorption and rust resistance.
- High-quality, maintenance-free balanced motor with mixed-flow impeller for extremely quiet operation.
- 100% speed controllable for precise airflow adjustment and system balancing.
This image displays the Vortex VTX12XL V-Series 2050 12-inch inline duct fan. It features a durable grey hammertone powder-coated steel casing and a prominent red mixed-flow impeller visible through the duct opening. Mounting brackets are visible on the side.
Setup and Installation
Before beginning installation, ensure the power supply is disconnected. This fan is designed for inline duct applications and can be installed horizontally or vertically.
Mounting
- Identify a suitable location for the fan within your ducting system. Ensure there is sufficient space for airflow and maintenance access.
- Utilize the galvanized mounting brackets provided. Secure the brackets to a stable surface (e.g., ceiling joist, wall stud) using appropriate fasteners (not included).
- Attach the fan securely to the mounted brackets, ensuring it is stable and vibration-free.
Duct Connection
- Connect the ductwork to the extended collars of the fan. The extended collar design facilitates easy duct installation.
- Secure all duct connections with duct tape or clamps to ensure an airtight seal and prevent air leakage.
Electrical Connection
- The fan comes with a factory-installed 6-foot 120V power cord.
- Plug the power cord into a standard 120V electrical outlet. Ensure the outlet is properly grounded and meets local electrical codes.
- If connecting to a speed controller, follow the instructions provided with your specific speed controller for proper wiring.
Operating Instructions
The Vortex VTX12XL fan is designed for continuous operation. Once properly installed and connected to power, it is ready for use.
Powering On/Off
- To turn the fan on, ensure it is plugged into a live 120V outlet. The fan will begin operating.
- To turn the fan off, unplug it from the power outlet or use an external switch if one is installed in your system.
Speed Control
This fan is 100% speed controllable. To adjust the airflow, use a compatible external fan speed controller (sold separately). Connect the speed controller according to its manufacturer's instructions. Adjusting the speed allows for precise balancing of your ventilation system and optimization of air movement for specific needs.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Vortex VTX12XL fan. Always disconnect power before performing any maintenance.
Cleaning
- Periodically inspect the fan impeller and casing for dust and debris buildup.
- Using a soft brush or cloth, gently clean the impeller blades and the interior of the casing. A vacuum cleaner with a brush attachment can also be used.
- Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or components.
Motor Lubrication
The fan is equipped with permanently lubricated ball bearings, meaning no additional lubrication is required throughout the life of the product.
Inspection
- Check all electrical connections and wiring for any signs of wear or damage.
- Ensure mounting brackets and duct connections remain secure.
Troubleshooting
If you encounter issues with your Vortex VTX12XL fan, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply; Loose electrical connection; Faulty speed controller (if used). | Check if the fan is plugged in and the outlet has power. Verify all electrical connections are secure. Bypass the speed controller to test if the fan operates directly. |
| Reduced airflow. | Blocked ductwork; Dirty impeller blades; Incorrect speed setting. | Inspect ductwork for obstructions. Clean the impeller blades and casing. Adjust the speed controller to a higher setting. |
| Unusual noise or vibration. | Loose mounting; Debris in impeller; Damaged impeller. | Ensure the fan is securely mounted. Disconnect power and inspect the impeller for any foreign objects. If the impeller is damaged, contact customer support. |
If the problem persists after attempting these solutions, please contact Vortex customer support.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Vortex |
| Model Name | Vortex Fan V-Series 2050 |
| Item Model Number | VTX12XL |
| Size | 12" |
| Electric Fan Design | Blower |
| Power Source | 120v |
| Voltage | 120 Volts |
| Wattage | 540 watts |
| Finish Type | Coat Finish, Powder Coat |
| Blade Material | Plastic |
| Recommended Uses For Product | Exhausting |
| Room Type | Kitchen, Bedroom |
| Product Dimensions | 19.3 x 19.3 x 24 inches |
| Item Weight | 43.6 pounds |
| UPC | 628507100087 |
| ASIN | B002HJHCL2 |
| Country of Origin | Canada |
Warranty and Support
The Vortex VTX12XL V-Series 2050 Fan comes with a 10-Year Warranty, ensuring peace of mind regarding its quality and durability. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any other inquiries, please contact Vortex customer support. Keep your purchase receipt as proof of purchase for warranty purposes.
Please refer to the official Vortex website or product packaging for the most current contact information and detailed warranty terms.
