Eheim Biopower 160 Interior Filter Instruction Manual

1. Product Overview

The Eheim Biopower 160 is an internal filter designed for aquariums ranging from 80 to 160 liters. It features a multi-layer filtration system, similar to an external filter, to ensure optimal water quality. The filter includes a pre-filter cartridge and Substrate Pro media for biological filtration. Its all-round rotatable pump head allows for flexible water flow direction, and the flow rate is adjustable from 180 to 550 liters per hour.

• Multi-layer Filtration: Provides comprehensive mechanical, biological, and chemical filtration.
• Adjustable Flow Rate: Customize water circulation to suit your aquarium's needs.
• Rotatable Pump Head: Direct water flow precisely where it is needed.
• Easy Maintenance: Designed for convenient cleaning and media replacement.

Image 1.1: The Eheim Biopower 160 Interior Filter. This image displays the compact design of the filter, highlighting its various components including the filter baskets and the adjustable outlet.

2. Safety Instructions

Please read and follow these safety instructions carefully to prevent injury or damage to the product.

• Always disconnect all electrical appliances in the aquarium from the mains before performing any maintenance or cleaning.
• Ensure the filter is fully submerged in water during operation. Running dry can damage the motor.
• Do not operate the filter if the power cord or plug is damaged.
• This appliance is for indoor use only and intended for aquariums.
• Keep out of reach of children.
• Do not attempt to repair the filter yourself. Contact qualified personnel for service.

3. Package Contents

Verify that all components are present in the package:

• Eheim Biopower 160 Filter Unit
• Pre-filter cartridge
• Filter baskets with Substrate Pro media
• Suction cups for mounting
• Spray bar and outlet nozzle
• Instruction Manual

4. Setup and Installation

Follow these steps to set up your Eheim Biopower 160 filter:

1. Unpack Components: Carefully remove all parts from the packaging and check against the package contents list.
2. Assemble Filter Media: Ensure the filter media (pre-filter, Substrate Pro) are correctly placed within their respective baskets. The water flows from bottom to top through the filter layers.
3. Attach Suction Cups: Securely attach the suction cups to the filter housing.
4. Position in Aquarium: Place the filter inside the aquarium, ensuring it is fully submerged. The filter should be positioned vertically, preferably in a corner or along the back wall, to allow for optimal water circulation.
5. Attach Outlet: Connect the desired outlet (e.g., spray bar or nozzle) to the pump head. Adjust the direction of the outlet as needed.
6. Connect to Power: Once the filter is correctly positioned and fully submerged, plug the power cord into a suitable electrical outlet.

5. Operating Instructions

Once installed, the Eheim Biopower 160 is ready for operation.

• Starting the Filter: After plugging in, the filter will start automatically. Ensure water is flowing from the outlet.
• Adjusting Flow Rate: The flow rate can be adjusted using the control knob located on the pump head. Turn the knob to increase or decrease the water flow according to your aquarium's requirements and inhabitants.
• Directing Water Flow: The pump head is rotatable 360 degrees. Adjust its position to create optimal water movement and surface agitation for gas exchange.

6. Maintenance

Regular maintenance is crucial for the efficient operation and longevity of your filter.

1. Disconnect Power: Always unplug the filter from the mains before performing any maintenance.
2. Remove Filter from Aquarium: Gently detach the filter from the aquarium wall. The mounting bracket with suction cups can remain on the glass, allowing the filter unit to be easily removed for cleaning.
3. Disassemble Filter: Separate the pump head from the filter baskets. Open the filter baskets to access the media.
4. Clean Pre-filter: The pre-filter cartridge should be rinsed regularly (weekly or bi-weekly, depending on aquarium load) under aquarium water or dechlorinated tap water. Avoid cleaning with harsh chemicals.
5. Clean Filter Media: The biological filter media (Substrate Pro) should be cleaned less frequently (every 1-3 months) to preserve beneficial bacteria. Rinse gently in old aquarium water to remove debris without destroying the bacterial colony. Replace media as recommended by the manufacturer, typically every 6-12 months.
6. Clean Impeller: Periodically inspect and clean the impeller and impeller shaft for any debris or blockages. This helps maintain optimal flow and prevents noise.
7. Reassemble and Reinstall: After cleaning, reassemble the filter components in the correct order and reinstall it in the aquarium. Ensure all connections are secure before plugging it back in.

7. Troubleshooting

If you encounter issues with your Eheim Biopower 160, refer to the following table:

8. Specifications

Key technical specifications for the Eheim Biopower 160 filter:

• Model Number: 2411020
• Aquarium Size: 80 - 160 Liters
• Adjustable Water Flow: 180 - 550 L/H
• Power Consumption: 6 Watts
• Filtration Volume: 380 cm³
• Maximum Water Rise: 0.43 m
• Product Dimensions: Approximately 4.17 x 4.72 x 9.84 inches (10.6 x 12 x 25 cm)
• Item Weight: 1.54 Pounds (700 Grams)
• Material: Polypropylene

9. Warranty and Support

Eheim products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official Eheim website. For technical support, spare parts, or service inquiries, please contact Eheim customer service or your local authorized dealer.

Keep your proof of purchase for warranty claims.