Noma Ornamotion Ornament Turning Motor User Manual

1. Introduction

Thank you for choosing the Noma Ornamotion Ornament Turning Motor. This device is designed to gently rotate your hanging ornaments, adding dynamic movement and enhancing their display. Each box contains three Ornamotion motors, providing versatile options for your decorative needs. Please read this manual carefully before use to ensure proper installation and operation.

2. Safety Information

• Keep out of reach of small children and pets.
• Do not expose the motor to water or excessive moisture.
• Do not attempt to disassemble or modify the motor. This will void the warranty.
• Ensure the ornament attached is within the motor's weight capacity (specific weight capacity not provided, assume standard ornament weight).
• Use only as intended for rotating lightweight hanging ornaments.

3. Package Contents

Your Noma Ornamotion package should contain the following items:

• 3 x Ornamotion Ornament Turning Motors
• 1 x User Manual (this document)

Figure 1: Noma Ornamotion Ornament Turning Motor. This image shows the compact design of the motor, typically featuring a hook at the top for hanging and a rotating hook at the bottom for attaching an ornament.

4. Setup and Installation

Follow these steps to properly set up your Ornamotion motor:

1. Prepare the Motor: If your motor requires batteries (not explicitly stated in product info, but common for such devices), open the battery compartment and insert the required batteries (e.g., AA or AAA, not included). Ensure correct polarity. Close the compartment securely.
2. Attach to Hanging Point: Use the top hook of the Ornamotion motor to hang it from your desired location, such as a Christmas tree branch, a ceiling hook, or an ornament stand. Ensure the hanging point is stable and can support the weight of the motor and the ornament.
3. Attach Ornament: Carefully hang your chosen ornament onto the rotating hook located at the bottom of the Ornamotion motor. Ensure the ornament is balanced and securely attached.
4. Check Clearance: Verify that the ornament has sufficient clearance to rotate freely without hitting any surrounding objects.

5. Operation

Once installed, the Ornamotion motor is designed for simple operation:

• Activation: If the motor has an ON/OFF switch, slide it to the "ON" position. If it's battery-operated and has no switch, it may activate automatically upon battery insertion or when an ornament is hung.
• Rotation: The motor will begin to slowly rotate the attached ornament, providing a continuous display.
• Deactivation: To stop rotation, slide the ON/OFF switch to the "OFF" position, or remove the batteries if there is no switch.

Note: The speed of rotation is fixed and cannot be adjusted. For optimal performance, ensure fresh batteries are used if applicable.

6. Maintenance

• Cleaning: Wipe the motor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the motor in a cool, dry place, away from direct sunlight and extreme temperatures. If battery-operated, remove batteries before long-term storage to prevent leakage.
• Inspection: Periodically check the hooks for any signs of wear or damage. Replace the motor if any damage is observed.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Noma stands behind the quality of its products. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Noma website. Please retain your proof of purchase for any warranty claims.