Duracell Go Mobile Charger CEF26DX Instruction Manual

Introduction

The Duracell Go Mobile Charger is designed for convenient and efficient charging of AA and AAA rechargeable batteries, both at home and on the go. This manual provides essential information for safe and effective use of your charger.

Image: Duracell Go Mobile Charger packaging, highlighting its features and included accessories.

Safety Information

CAUTION:

• Do not disassemble the charger or batteries.
• Do not short-circuit the batteries.
• Do not expose the charger or batteries to fire or high temperatures.
• Ensure proper connection to specified devices.
• Use only Duracell or other compatible rechargeable AA or AAA batteries.

Package Contents

• Duracell Go Mobile Charger
• 2 AA Rechargeable Batteries (Precharged)
• 2 AAA Rechargeable Batteries (Precharged)
• AC Power Adapter (for home use)
• Car Adapter (for in-car charging)

Setup

1. For Home Use: Connect the AC power adapter to the charger and then plug it into a standard wall outlet.
2. For Car Use: Connect the car adapter to the charger and then plug it into your vehicle's 12V accessory outlet (cigarette lighter socket). The charger's compact design allows it to fit in most car cup holders for convenience.

Video: Duracell Go Mobile Charger overview, demonstrating its compact design and use in a car cup holder.

Operating Instructions

1. Insert Batteries:
   • The charger is designed to charge batteries in pairs. Insert either 2 or 4 AA or AAA rechargeable batteries into the designated slots.
   • Ensure the positive (+) and negative (-) ends of the batteries match the polarity indicators inside the charger.
   • Do not mix AA and AAA batteries in the same charging pair.
2. Charging Process:
   • Once batteries are correctly inserted and the charger is powered, the indicator light(s) will illuminate red, indicating that charging is in progress.
   • The Duracell Go Mobile Charger is designed for fast charging, typically completing a full charge in approximately one hour for Duracell rechargeable batteries.
3. Charge Completion:
   • When the batteries are fully charged, the indicator light(s) will turn solid green.
   • If the light is blinking green, the batteries are ready for use.
   • Remove the batteries once charging is complete.

Video: Demonstration of inserting batteries into the Duracell Go Mobile Charger and observing the charging indicator lights.

Maintenance

• Keep the charger clean and free from dust and debris.
• Store the charger and batteries in a cool, dry place when not in use.
• Avoid dropping the charger or subjecting it to strong impacts.

Troubleshooting

• Blinking Red Light: If the indicator light is blinking red, this typically means there is an issue with the battery. This could indicate:
  • The battery is no longer capable of holding a charge.
  • An incompatible battery type has been inserted.
  • The battery is faulty or damaged.
  In such cases, remove the problematic battery and replace it with a known good, compatible rechargeable battery.
• No Indicator Light: If no light appears when batteries are inserted and the charger is plugged in:
  • Check if the charger is properly connected to the power source (wall outlet or car adapter).
  • Ensure the batteries are correctly inserted with the correct polarity.
  • Verify that the power outlet is functional.

Specifications

Warranty

The Duracell Go Mobile Charger comes with a three-year limited manufacturer warranty. Please refer to the warranty card included with your product for full details and terms.

Support

For further assistance or inquiries, please visit the official Duracell website or contact their customer support. Contact information can typically be found on the product packaging or the manufacturer's website.