1. Introduction
This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of the Panasonic Arbitrator 360 Law Enforcement Video Capture Kit (ARBTR-KIT-360). This system is a fully-integrated solution designed for video capture, storage, transfer, and video management in law enforcement applications. It offers comprehensive surveillance capabilities with a 360-degree view.
2. Safety Information
- Read all instructions carefully before operating the device.
- Ensure all connections are secure and correctly made to prevent damage or malfunction.
- Do not expose the unit to extreme temperatures, moisture, or direct sunlight beyond its specified operating conditions.
- Only use accessories and power supplies approved by Panasonic.
- Refer all servicing to qualified personnel. Do not attempt to open or repair the unit yourself.
3. Package Contents
Verify that all items listed below are present in your package:
- Camera Body
- Storage Device
- USB Cable
- Mounting Accessory
Image: Main components of the Panasonic Arbitrator 360 Law Enforcement Video Capture Kit.
4. Setup
- Mounting the System: Use the provided mounting accessory to securely install the camera body and storage device within the vehicle. Ensure the mounting location provides a clear field of view for the cameras and is stable to minimize vibration.
- Connecting Cameras: The system supports up to 5 cameras for a comprehensive 360-degree view. Connect each camera to the designated ports on the camera body. Refer to the camera-specific instructions for optimal placement and orientation.
- Connecting to a PC: Connect the Arbitrator 360 system to a Toughbook computer or other compatible mounted PC using the provided USB cable. This connection facilitates system configuration, live viewing, and data transfer.
- Power Connection: Connect the system to the vehicle's power supply according to the installation guidelines. Ensure a stable power source to prevent interruptions during recording.
- Initial Configuration: Power on the connected PC and launch the Arbitrator software. Follow the on-screen prompts to configure camera settings, recording parameters, and storage preferences.
5. Operating Instructions
- Starting Recording: Once the system is set up and configured, initiate recording through the Arbitrator software interface on the connected PC. The system can record and view up to 5 cameras simultaneously.
- Monitoring Video: Use the software to monitor live feeds from all connected cameras. The wide-angle lens and 220x zoom capabilities maximize the field of view, allowing for detailed observation.
- Managing Recordings: Recorded video files are stored on the integrated storage device. Access these files through the Arbitrator software for review, categorization, and export.
- Data Transfer: To transfer recorded data, connect the storage device directly to a workstation or use the USB connection to the mounted PC for transfer to an external storage solution or network.
- System Shutdown: Always properly shut down the Arbitrator system through the software interface before powering down the vehicle or disconnecting components to prevent data corruption.
6. Maintenance
- Cleaning: Regularly clean the camera lenses and the exterior of the system components with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Environmental Protection: The system is designed to be temperature, vibration, and dust-resistant. However, ensure that the operating environment remains within specified limits to prolong the life of the equipment.
- Software Updates: Periodically check for and install software updates for the Arbitrator system to ensure optimal performance, security, and access to new features.
- Data Backup: Regularly back up important video data to external storage or a secure network location to prevent loss.
- Cable Inspection: Periodically inspect all cables for signs of wear or damage. Replace any damaged cables immediately.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| System not powering on | Loose power connection, vehicle power issue | Check all power cables and connections. Verify vehicle power supply. |
| No video feed from cameras | Loose camera connection, camera malfunction, software issue | Ensure cameras are securely connected. Restart the Arbitrator software. Check camera status in software. |
| Recording issues (e.g., stops unexpectedly) | Insufficient storage space, software error, power fluctuation | Check available storage on the device. Ensure stable power. Restart the system and software. |
| Unable to transfer data | Faulty USB cable, incorrect software settings, storage device error | Try a different USB cable. Verify data transfer settings in the software. Check the storage device for errors. |
If problems persist after attempting these solutions, contact Panasonic technical support for further assistance.
8. Specifications
- Model: ARBTR-KIT-360
- Brand: Panasonic
- Max Screen Resolution: FHD
- Item Weight: 18.7 pounds
- Recording Capability: Up to 5 cameras simultaneously, offering a 360° view
- Lens Features: Wide-angle lens, 220x zoom
- Durability: Temperature, vibration, and dust-resistant
- Integration: Designed for use with Toughbook computers or other mounted PCs
- Functionality: Fully-integrated system for video capture, storage, transfer, and video management
9. Warranty and Support
The Panasonic Arbitrator 360 Law Enforcement Video Capture Kit (ARBTR-KIT-360) is manufactured by Panasonic. For information regarding product warranty, technical support, or service, please refer to the warranty documentation included with your purchase or visit the official Panasonic support website. Ensure you have your model number (ARBTR-KIT-360) and purchase details available when contacting support.
