1. Introduction
This manual provides essential information for the safe and effective operation of your Behringer B210d Active 220-Watt 2-Way PA Speaker System. The B210d is an active 200-Watt 2-Way PA Speaker System featuring a 10-inch woofer and a 1.35-inch compression driver, designed for various audio applications.
Figure 1: Front view of the Behringer B210d Active PA Speaker System.
2. Important Safety Instructions
Please read and follow all safety instructions before operating the device. Retain this manual for future reference.
- Power Source: Connect the unit only to a power supply of the type specified in the operating instructions or on the unit.
- Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Heat: Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Water & Moisture: Do not use this apparatus near water or moisture.
- Cleaning: Clean only with a dry cloth.
- Servicing: Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.
- Grounding: This apparatus must be grounded.
3. Key Features
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels.
- Internal switch-mode power supply for noise-free audio, superior transient response, and very low power consumption.
- Built-in HF (High Frequency) and LF (Low Frequency) Protection.
- Integrated Pole Mount for versatile placement options.
4. Setup
4.1 Unpacking and Inspection
Carefully unpack your B210d speaker system. Inspect the unit for any signs of damage that may have occurred during transit. In the box, you should find the Behringer EUROLIVE B210D 200W 2-Way Active PA Speaker and a power cable.
4.2 Placement Options
The B210d offers flexible placement:
- Pole Mounting: Utilize the integrated pole mount to elevate the speaker on a standard speaker stand for optimal sound dispersion.
- Floor Standing: The speaker can be placed directly on a flat surface.
- Monitor Wedge: The trapezoidal enclosure design allows the speaker to be used as a floor monitor wedge, angled towards the performer.
Figure 2: Side view of the Behringer B210d, illustrating its compact size and suitability for various placements.
4.3 Power Connection
Connect the supplied power cable to the power input on the rear panel of the speaker and then to a suitable electrical outlet. Ensure the power switch is in the 'OFF' position before connecting to power.
5. Operating Instructions
5.1 Rear Panel Controls and Connections
The rear panel of the B210d provides all necessary inputs, outputs, and controls for operation:
- Input: Features XLR and 1/4" TRS inputs for connecting microphones, line-level devices, or instruments.
- Level Control: Adjusts the overall input gain for connected devices.
- Equalizer (EQ): Dedicated 2-band EQ (High and Low) for tone shaping, allowing you to adjust the frequency response to suit your environment and audio source.
- Mix Output: An XLR output allows you to link multiple B210d speakers or connect to other active loudspeakers for expanded sound coverage.
- Wireless System Connectivity: The speaker is wireless-ready for use with Behringer's ULM Digital Wireless Microphones (sold separately).
- Power Switch: Turns the unit on and off.
5.2 Basic Operation
- Ensure all connections are secure and the power switch is off.
- Turn on your audio source (mixer, instrument, microphone).
- Turn on the B210d speaker using the power switch on the rear panel.
- Slowly increase the Level control to achieve the desired volume. Monitor the 'CLIP' indicator to avoid distortion.
- Adjust the High and Low EQ controls to fine-tune the sound.
6. Technical Specifications
| Specification | Value |
|---|---|
| Brand | Behringer |
| Model Name | B210D |
| Speaker Type | Woofer, Tweeter |
| Speaker Amplification Type | Active |
| Output Wattage | 200 Watts |
| Woofer Diameter | 10 Inches (25.4 Centimeters) |
| Compression Driver | 1.35 Inches |
| Impedance | 8 Ohm |
| Connectivity Technology | XLR |
| Product Dimensions | 9.61"D x 11.5"W x 18.35"H |
| Item Weight | 19.18 Pounds |
| Material | Metal, Plastic |
| Color | Black |
| Power Source | Corded Electric |
| Input Voltage | 230 Volts |
| Mounting Type | Floor Standing |
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, store the speaker in a dry, dust-free environment.
- Inspection: Periodically check all cables and connections for wear or damage.
8. Troubleshooting
- No Sound:
- Ensure the speaker is powered on and the power cable is securely connected.
- Check the input source and its connections.
- Verify that the Level control on the speaker is turned up.
- Test with a different audio source or cable.
- Distorted Sound:
- Reduce the input Level on the speaker or the output level from your audio source. The 'CLIP' indicator should not be constantly lit.
- Check EQ settings; extreme adjustments can cause distortion.
- Hum or Noise:
- Ensure all cables are properly shielded and connected.
- Try connecting the speaker to a different power outlet.
9. Warranty and Support
The Behringer B210d comes with a Limited Warranty. For detailed warranty terms, service information, and technical support, please visit the official Behringer website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
