Fortress 1850D

Download PDF
Contents

Fortress 1850D Combination Padlock User Manual

Model: 1850D | Brand: Fortress

Introduction

This manual provides essential information for the proper use and maintenance of your Fortress 1850D Combination Padlock. This 1-7/8" combination lock features a 3/4" case hardened steel shackle and 3-digit dialing, designed for general security applications. Please read these instructions carefully before using your padlock.

Product Overview

Fortress 1850D Combination Padlock with dial showing numbers and 'FORTRESS' brand

Image: The Fortress 1850D Combination Padlock, featuring a chrome-plated shackle with "HARDENED" embossed, and a black and silver dial with numbers 0-35 and the "FORTRESS" logo in the center. A red indicator mark is visible above the '0' on the dial.

The Fortress 1850D is a durable combination padlock constructed from stainless steel and alloy steel. It features a 3-digit dialing mechanism and a case-hardened steel shackle for enhanced resistance. Its compact design makes it suitable for various uses, including lockers, gates, and storage units.

Setup

Finding Your Combination

Your Fortress 1850D Combination Padlock comes with a pre-set, non-changeable 3-digit combination. This combination is typically found on a sticker located on the back of the padlock itself or on the packaging it came in. Carefully remove the sticker to reveal your unique combination. It is recommended to record this combination in a secure place for future reference.

Note: The sticker may be difficult to remove cleanly and may leave residue. Use appropriate cleaning methods if necessary.

Operating Instructions

Opening the Padlock

  1. Turn the dial clockwise two full turns and stop at the first number of your combination.
  2. Turn the dial counter-clockwise one full turn past the first number, and then stop at the second number of your combination.
  3. Turn the dial clockwise directly to the third number of your combination.
  4. Pull up on the shackle to open the padlock. If the shackle does not open, ensure the numbers are precisely aligned with the indicator mark.

Closing the Padlock

To close the padlock, push the shackle firmly down into the lock body until it clicks into place. Once closed, scramble the dial numbers to secure the lock. Ensure the shackle is fully seated; some force may be required to close it completely.

Maintenance

The Fortress 1850D Combination Padlock requires minimal maintenance. To ensure smooth operation:

  • Keep the lock clean and free from dirt and debris.
  • Periodically apply a small amount of graphite lubricant or a silicone-based spray to the shackle and dial mechanism to maintain smooth movement. Avoid oil-based lubricants as they can attract dust.
  • Store the padlock in a dry environment to prevent rust, especially if it is not in regular use.

Troubleshooting

ProblemPossible CauseSolution
Padlock will not open.Incorrect combination entered; dial not precisely aligned; internal mechanism stuck.
  • Double-check your combination and re-enter carefully, ensuring precise alignment with the indicator.
  • Apply lubricant to the dial and shackle.
  • Ensure the shackle is not under tension when attempting to open.
Dial feels stiff or rough.Dirt/debris in mechanism; lack of lubrication.Clean the lock thoroughly. Apply graphite or silicone lubricant to the dial mechanism.
Shackle is difficult to close.Misalignment; internal friction.Ensure the shackle is aligned correctly with the opening. Apply lubricant to the shackle entry points. Apply firm, even pressure to close.

Security Note: While designed for general security, no padlock is entirely invulnerable. For high-security applications, consider additional security measures. This lock is not designed to withstand advanced lock-picking techniques.

Specifications

BrandFortress
Model Number1850D
Lock TypeCombination Lock
Special FeatureKeyless
MaterialStainless Steel, Alloy Steel
ColorBlack, Silver
Item Dimensions (L x W x H)1.48 x 3.75 x 6.56 inches
Item Weight6.2 Ounces
Shackle Diameter5/16 inches (approx.)
Shackle MaterialCase Hardened Steel
UPC071649015618

Warranty and Support

For information regarding warranty coverage, product support, or to inquire about replacement parts, please refer to the original product packaging or contact Fortress customer service directly. Contact details can typically be found on the manufacturer's official website or through your point of purchase.

For additional resources and product information, you may visit the Master Lock Store on Amazon.

© 2024 Fortress. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.