Introduction
The Dremel 200 Series rotary tool offers precision and control for a wide range of projects. This kit includes the rotary tool, one attachment, and 15 genuine Dremel accessories. It is designed for various applications including cutting, carving, engraving, cleaning, polishing, sanding, and sharpening.
Image: The Dremel 200-1/15 Two-Speed Rotary Tool, a versatile tool for various tasks.
Safety Information
Always prioritize safety when operating power tools. Please observe the following precautions:
- Wear eye glasses when using the tool to protect against debris.
- Ensure the workpiece is securely clamped or held to prevent movement during operation.
- Keep hands and loose clothing away from rotating accessories.
- Disconnect the tool from the power source before changing accessories or performing maintenance.
Setup and Accessories
The Dremel 200-1/15 kit comes with the rotary tool, one attachment, and 15 assorted accessories. These accessories are designed for various applications including cutting, carving/engraving, cleaning/polishing, sanding, and sharpening/grinding.
Image: Overview of the Dremel 200-1/15 kit contents, including the rotary tool and various accessories.
Changing Accessories
- Ensure the tool is unplugged from the power source.
- Press and hold the shaft lock button.
- Unscrew the collet nut counter-clockwise.
- Insert the desired accessory shank into the collet.
- Tighten the collet nut clockwise while holding the shaft lock button. Do not overtighten.
Included Attachment: 675 Lawn Mower and Garden Tool Sharpener
The kit includes a 675 Lawn Mower and Garden Tool Sharpener attachment, designed to restore the edge on garden tools such as shears, hoes, and shovels.
Image: The Dremel 675 Garden Tool Sharpener attachment, used for restoring edges on various garden tools.
Operating the Tool
The Dremel 200 Series features two-speed settings for optimal performance across different tasks. The low-speed setting (15,000 RPM) is suitable for lighter-duty applications, while the high-speed setting (35,000 RPM) is ideal for heavier-duty projects like routing, cutting, and sanding.
Speed Selection
To select the desired speed, use the switch located on the tool body. Slide the switch to 'LOW' for 15,000 RPM or 'HIGH' for 35,000 RPM.
Image: The Dremel 200 Series rotary tool highlighting the two-speed control switch.
Application Versatility
The Dremel 200 Series is designed for a variety of tasks:
- Carving/Engraving: Use specialized bits for detailed work on wood, glass, or metal.
- Cutting: Employ cutting wheels for precise cuts in various materials.
- Grinding/Sharpening: Utilize grinding stones for sharpening tools or smoothing rough edges.
- Cleaning/Polishing: Attach polishing wheels and compounds for restoring shine.
- Sanding: Use sanding bands or discs for smoothing surfaces.
Image: Visual representation of the Dremel 200 Series performing different tasks such as carving, cutting, grinding, polishing, and sanding.
Official Product Video: Dremel 200 Two Speed Rotary Tool
Video: An official overview of the Dremel 200 Two-Speed Rotary Tool, demonstrating its features and operation.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your Dremel rotary tool.
- Cleaning: Regularly clean the tool after use to prevent dust and debris buildup, especially in the ventilation slots. This helps maintain efficient operation and prevents overheating.
- Replaceable Brushes: The Dremel 200 Series features replaceable motor brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to approximately 1/4 inch (6mm) or less. Refer to the detailed diagram for brush replacement.
Image: A detailed view of the Dremel 200 Series rotary tool, indicating the location of the replaceable brushes.
Troubleshooting
If you encounter issues with your Dremel 200 Series rotary tool, consider the following general troubleshooting steps:
- Tool Not Starting: Ensure the tool is securely plugged into a functional power outlet. Check the power switch is in the 'ON' position.
- Reduced Performance: Inspect accessories for wear or damage and replace if necessary. Check the motor brushes for wear and replace if needed. Ensure the collet nut is tightened correctly.
- Overheating: Ensure ventilation slots are clear of debris. Avoid applying excessive pressure during operation. Allow the tool to cool down if it becomes hot.
For persistent issues, please refer to the detailed troubleshooting guide in the full product manual or contact Dremel customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Dremel |
| Model Number | 200-1/15 |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage | 108 watts |
| Maximum Rotational Speed | 35,000 RPM |
| Minimum Speed | 15,000 RPM |
| Item Weight | 1.45 Pounds |
| Material | High Density Plastic |
| Included Components | Two Speed Rotary Tool, (15) Assorted Accessories, (1) Attachment |
Warranty
The Dremel 200-1/15 Two-Speed Rotary Tool Kit is backed by a 2-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Image: Dremel's 2-Year Limited Warranty shield, indicating product coverage.
Support
For further assistance, product registration, or to explore additional accessories, please visit the official Dremel website or contact Dremel customer service. You can also find more information and support resources through the Dremel Store on Amazon.
Visit the Dremel Store for more products and information.
