Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Barska AX11224 Biometric Fingerprint Security Home Safe Box. Please read this manual thoroughly before using the product to ensure proper function and safety.
Important Safety Information
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always handle with care and follow all safety guidelines.
Ensure the safe is securely mounted to prevent unauthorized removal. Keep emergency keys in a secure location away from the safe and out of reach of children.
Package Contents
- Barska AX11224 Biometric Fingerprint Security Home Safe Box
- 4 AA Batteries
- Battery Pack
- 2 Emergency Keys
- Hex Key (for faceplate removal)
- Mounting Screws
- User Manual
An image showing the Barska AX11224 safe along with its included accessories: two emergency keys, a hex key, mounting hardware, and four AA batteries.
Setup
1. Battery Installation
- Locate the battery compartment on the inside of the safe door.
- Remove the battery cover.
- Insert four AA batteries, ensuring correct polarity.
- Replace the battery cover.
Video demonstrating the installation of AA batteries into the internal battery compartment of the Barska biometric safe.
2. Mounting the Safe
The safe features pre-drilled mounting holes on the back and bottom for secure installation. Use the provided mounting screws to attach the safe to a wall or floor, preventing unauthorized removal.
Rear view of the Barska AX11224 safe, highlighting the pre-drilled mounting holes for secure installation.
Operating Instructions
1. Registering Fingerprints
- With the safe door open, locate the red programming button on the inside of the safe door.
- Press and release the programming button.
- Immediately place your finger on the biometric scanner. You will hear a single beep, indicating the fingerprint is recorded.
- To add additional fingerprints, repeat the process. The safe can store up to 120 unique fingerprints.
Video demonstrating the process of registering a fingerprint on the Barska biometric safe's scanner.
2. Opening the Safe with Fingerprint
- Press the wake-up button on the biometric scanner once.
- Place a registered finger on the scanner. The safe will open after successful recognition.
3. Closing and Locking the Safe
Close the safe door. Press the wake-up button again to engage the motorized deadbolts and lock the safe.
4. Silent Access Mode
To activate silent mode, press and hold the programming button on the inside of the door until two lights flash. The safe will now operate without beeping, except for the door open alarm.
Image illustrating the silent mode feature of the Barska AX11224 safe, showing it placed on a nightstand in a bedroom.
5. Emergency Key Access
In case of battery failure or forgotten fingerprints, the safe can be opened using the emergency keys.
- Remove the Barska logo plate (G) using the provided hex wrench to expose the emergency key access.
- Insert an emergency key into the key access and turn clockwise to open the safe.
Close-up image showing the emergency key access point on the Barska AX11224 safe, located behind the removable logo plate.
Key Features
- Advanced Biometric Security: 2.5-second access via fingerprint recognition.
- Robust Construction: Meticulously crafted with solid alloy steel to resist tampering.
- Ample User Capacity: Stores up to 120 unique user fingerprints.
- Discreet Operation: Silent mode for noise-free usage.
- Emergency Access: Includes backup keys for alternative entry.
- Internal Protection: Features a floor mat to protect stored items.
- Secure Locking: Two solid steel motorized locking bolts.
- DOJ Approved: Approved for firearm storage.
The Barska AX11224 Biometric Fingerprint Security Home Safe Box with its door slightly ajar, showcasing the biometric scanner and internal locking mechanism.
Maintenance
- Battery Replacement: Replace all four AA batteries when the low battery indicator appears or if the safe does not respond as expected.
- Cleaning: Wipe the biometric scanner and safe exterior with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Fingerprint Sensor Care: Keep the fingerprint sensor clean and dry for optimal performance.
Troubleshooting
- Safe does not open with fingerprint: Ensure your finger is placed correctly on the scanner. Try re-registering your fingerprint. Check battery levels and replace if necessary. Use emergency keys if biometric access fails.
- Safe is in Default Mode (any finger opens it): This can happen if a fingerprint is not properly registered. Register your first fingerprint carefully, then test with an unregistered finger. If it opens, re-register your print.
- No sound in silent mode: The silent mode disables most beeps, but the door open alarm cannot be disabled.
Specifications
| Feature | Detail |
|---|---|
| Brand | Barska |
| Model Number | AX11224 |
| Product Dimensions | 12"D x 14.5"W x 7.75"H |
| Lock Type | Biometric, Key |
| Color | Black |
| Capacity | 0.8 Cubic Feet |
| Material | Alloy Steel |
| Special Feature | Fingerprint Sensor |
| Mounting Type | Wall Mount |
| Item Weight | 28 Pounds |
| Alarm | Audible (for door open) |
| Water Resistance Level | Water Repellent |
| Batteries | 4 AA batteries required (included) |
Warranty Information
This product comes with a 1-year warranty.
Support
For technical support, replacement parts, or additional assistance, please visit the official Barska website. Review the User Manual for more information.
FAQ: Are replacement parts or accessories available for this product if needed?
Please visit our website to request keys or replacement parts.
