Introduction
The ECCO 530 Back-Up Alarm is part of ECCO's 500 Series, designed to provide a reliable and cost-effective warning solution for vehicles. This alarm features a durable glass-filled nylon housing with epoxy-encapsulated electronics, offering exceptional protection against moisture, dust, and vibration. It is engineered to meet SAE certifications, ensuring quality and performance.
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your ECCO 530 Back-Up Alarm. This unit is designed for surface mounting and features a simple 2-bolt attachment system, making it suitable for a universal range of applications.
Figure 1: Easy Installation. The alarm features a straightforward 2-bolt mount design for quick and universal application.
Figure 2: Product Dimensions. The compact size of the alarm is 4 inches (L) x 1.6 inches (W) x 2.8 inches (H).
Wiring Instructions:
- Ensure the vehicle's power is off before beginning installation.
- Identify the reverse light circuit on your vehicle. The alarm operates on 12-24VDC.
- Connect the positive wire of the alarm to the positive wire of the reverse light circuit.
- Connect the negative wire of the alarm to a suitable ground point on the vehicle chassis.
- Secure all connections using appropriate electrical connectors and ensure they are insulated to prevent short circuits.
- Mount the alarm securely to a flat surface using the two integrated bolt holes.
- Test the alarm by engaging the vehicle's reverse gear to ensure proper operation.
Operating the Alarm
The ECCO 530 Back-Up Alarm is designed to automatically activate when the vehicle is placed into reverse, emitting a loud, clear warning signal to alert pedestrians and other vehicles of the backing maneuver. The alarm produces a sound level of 102 dB, ensuring high visibility in various environments, including those with significant ambient noise.
Figure 3: Front view of the ECCO 530 Back-Up Alarm, showcasing its compact design and durable housing.
Figure 4: The ECCO 530 Back-Up Alarm shown in context with a commercial van, emphasizing its superior quality, 102dB sound level, surface mount capability, and 12-24V compatibility. A 2-year warranty badge is also visible.
Maintenance
The ECCO 530 Back-Up Alarm is designed for minimal maintenance due to its robust construction. The glass-filled nylon housing and epoxy-encapsulated electronics provide excellent protection against environmental factors.
Figure 5: Waterproof Design. The alarm boasts an IP65 rating, making it highly resistant to water and suitable for all weather conditions.
Care and Cleaning:
- Periodically inspect the alarm for any visible damage or loose connections.
- Clean the exterior of the alarm with a damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive cleaners.
- Ensure the speaker grille is free from obstructions to maintain optimal sound output.
Troubleshooting
If you experience issues with your ECCO 530 Back-Up Alarm, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm does not sound | No power to the alarm; Loose or incorrect wiring; Damaged unit. | Check power supply and fuse; Verify all wiring connections are secure and correct; Inspect the unit for physical damage. If damaged, replace the unit. |
| Alarm sounds intermittently | Loose wiring connection; Intermittent power supply. | Check and secure all wiring connections; Inspect the vehicle's reverse light circuit for stable power output. |
| Alarm is too quiet | Speaker grille obstructed; Incorrect voltage supply. | Clear any debris from the speaker grille; Ensure the alarm is receiving the correct 12-24VDC power supply. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 530 |
| Noise Level | 102 dB |
| Voltage | 12-24 VDC |
| Mounting Type | Surface |
| Material | Glass-filled nylon housing, epoxy-encapsulated electronics |
| Product Dimensions | 4 x 1.6 x 2.8 inches |
| Item Weight | 12 ounces (0.75 pounds) |
| Control Method | Touch (Note: This typically refers to activation via reverse gear engagement.) |
| Sensor Technology | Contact Sensor (Note: This typically refers to activation via reverse gear engagement.) |
| UPC | 758379000144 |
| Included Components | Product and Instructions |
| Batteries Required? | No |
Warranty Information
The ECCO 530 Back-Up Alarm is covered by a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims.
Support
For further assistance, technical support, or warranty inquiries, please contact ECCO customer service. Visit the official ECCO website or refer to the contact information provided with your product packaging.
