Marshall PEDL-90008 Footswitch User Manual

Introduction

The Marshall PEDL-90008 Footswitch is designed to enhance the functionality and control of compatible Marshall MG series amplifiers. This programmable footswitch allows users to seamlessly switch between channels, activate effects, and manage other amplifier features, providing hands-free operation during performance or practice.

Product Overview

This image displays the Marshall PEDL-90008 footswitch. It features four silver footswitch buttons, labeled 1 through 4, and a central black LED display panel. The display shows 'MG' and 'Programmable Footcontroller' text, along with indicators for CLN (Clean), OD (Overdrive), REV (Reverb), FX (Effects), EXT FX (External Effects), DAMP (Damping), and TAP (Tap Tempo). The Marshall logo is prominently displayed on the left side of the panel.

The PEDL-90008 footswitch features four assignable buttons, allowing for quick access to various amplifier settings. An integrated LED panel provides visual feedback on the amplifier's current status and tuner information. It is specifically designed for compatibility with Marshall MG15FX, MG30FX, MG50FX, MG101FX, MG102FX, and MG100HFX amplifiers.

Setup

1. Unpacking: Carefully remove the PEDL-90008 footswitch from its packaging. Ensure all components, including the footswitch and any included cables, are present.
2. Compatibility Check: Verify that your Marshall amplifier is one of the compatible models: MG15FX, MG30FX, MG50FX, MG101FX, MG102FX, or MG100HFX. This footswitch is not compatible with the MG100 (non-FX) model.
3. Connection: Locate the footswitch input jack on your Marshall MG amplifier. Connect the supplied 1/4" TS cable from the footswitch to this input.
4. Power On: Once connected, power on your Marshall MG amplifier. The footswitch should automatically synchronize with the amplifier, and the LED display will illuminate.

Operating Instructions

The PEDL-90008 footswitch provides intuitive control over your amplifier's functions.

• Channel Switching: The four footswitch buttons (1-4) can be assigned to different channels or presets on your amplifier. Pressing a button will recall the assigned channel or preset. The LED panel will indicate the active channel (CLN, OD1, OD2, etc.).
• Effect Control: Indicators for REV (Reverb), FX (internal effects), and EXT FX (external effects loop) show the status of these effects. Depending on your amplifier model, you may be able to toggle these effects on/off directly from the footswitch or through programmed presets.
• Tap Tempo: The 'TAP' button allows you to set the tempo for time-based effects like delay. Repeatedly press the 'TAP' button in time with the desired tempo, and the amplifier will adjust the effect accordingly.
• Tuner Function: The LED panel also displays tuner status. When activated (refer to your amplifier's manual for tuner activation), the display will guide you in tuning your instrument.
• Damping Control: The 'DAMP' indicator relates to the amplifier's damping control, which affects the amplifier's response.

Maintenance

To ensure the longevity and optimal performance of your Marshall PEDL-90008 Footswitch, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the footswitch. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• Storage: Store the footswitch in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Regularly inspect the connection cable for any signs of wear, fraying, or damage. Replace damaged cables immediately to prevent intermittent operation or electrical issues.
• Avoid Impact: While designed for foot operation, avoid dropping the footswitch or subjecting it to severe impacts, which could damage the internal circuitry or external casing.

Troubleshooting

If you encounter issues with your PEDL-90008 Footswitch, consider the following:

• Footswitch Not Responding:
  • Ensure the cable is securely connected to both the footswitch and the amplifier's footswitch input.
  • Try using a different 1/4" TS cable to rule out a faulty cable.
  • Verify that your amplifier is powered on and functioning correctly.
• Incorrect Channel/Effect Switching:
  • Refer to your amplifier's user manual to ensure proper programming and assignment of footswitch functions.
  • Some amplifier settings may override footswitch commands; check amplifier settings.
• LED Display Not Working:
  • Confirm the footswitch is properly connected and the amplifier is on.
  • If the issue persists, contact customer support.

Specifications

Warranty Information

This Marshall product is covered by a manufacturer's warranty. For specific details regarding warranty terms, duration, and claim procedures, please refer to the warranty card included with your purchase or visit the official Marshall Amplification website. Retain your proof of purchase for warranty service.

Support

For further assistance, technical support, or service inquiries regarding your Marshall PEDL-90008 Footswitch, please contact Marshall Amplification customer support. You can typically find contact information, including phone numbers and email addresses, on the official Marshall website or in the documentation provided with your amplifier.